Question about 1997 Honda CBR 900 RR Fireblade
Hi, Kssmitty48 the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
Good luck and have a wonderful day.
Posted on Jun 22, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel pump pressure
In my experiences over the years pressure testing the carbs and messing with the fuel pump, I have never actually tested the pump output. Knowing that the average pop off pressure of the float valve on the float is 10-13 psi, this being tested via hand held pressure gauge to ensure no leaks before installation on the bike. I assume that the fuel pressure coming from the pump should not exceed the pop off pressure or it could cause the carbs to leak though and the bike would run rich. Hope this helps out.
Posted on Nov 10, 2008
I had an 07, I had to remove the lower and side fairings and then the bolts are visible, dont just lift it up because wires and the fuel line will be connected and tight. When you lift it, lift easily so you dont just rip everything, you should be able to lift it high enough to disconect the wires without damage.
Posted on Feb 20, 2009
Dont rebuild unless absolutetly necessary or need to rejet. Try some Seafoam first, it might save you hundreds of dollars and a lot of frustration.
read directions on can or just try pouring 1/3 can into two gallons gas and really get on it ...it might clear up any hesitation or stalling if thats whats happening. I got mine at Autozone for $10.( And it fixed the problem after riding for about 15 miles.)
Posted on Sep 15, 2009
Could be the coil pack probably a weak stator,. Try a pickup coil for the stator if you can get your hands on it way cheaper then replacing whole unit. Good luck.
Posted on Sep 16, 2009
Has the bike been sitting for an extended period of time (a year or more)? If so, then the carburetors need to be disassembled and cleaned. Sometimes, if you are lucky, you can drain the stale fuel out of the float bowls and - with fresh gasoline in the tank, it may run. If it hasn't been sitting, perform a complete tune up (valve adjustment, replace spark plugs, change oil and filter, etc.).
If that doesn't do the trick, then there's a more serious problem. One, or more, of the required three things for combustion are missing: Fuel, compression, and spark (at the right time). Make sure there's spark - and it is happening at the right time. Check compression. You need to see at least 140 psi on every cylinder in order for it to run.
Posted on Nov 14, 2009
Tips for a great answer:
Jan 07, 2014 | 1998 Honda CBR 900 RR Fireblade
Jun 12, 2012 | 1995 Honda CBR 900 RR Fireblade
Aug 01, 2011 | 1996 Honda CBR 900 RR Fireblade
Jul 14, 2011 | 1997 Honda CBR 900 RR Fireblade
Dec 12, 2010 | Honda CBR 600 RR Motorcycles
Sep 15, 2010 | 1993 Honda CBR 900 RR Fireblade
Jul 04, 2010 | 1998 Honda CBR 900 RR Fireblade
May 16, 2010 | 1997 Honda CBR 900 RR Fireblade
Jul 09, 2009 | 1995 Honda CBR 900 RR Fireblade
Mar 03, 2009 | 1994 Honda CBR 900 RR Fireblade
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: