Audio Players & Recorders Logo

Related Topics:

Michael Murphy Posted on Aug 06, 2008

Goldwing radio t is a panasonic honda radio cassette player out of a 1986 goldwing when searching for a radio station thee is a very loud interferance through the main speakers and some times both speakers dont work

  • jsherer May 11, 2009

    I have the same problem on my 1986 GL 1200 Aspencade. The radio speakers have real loud interference through the speakers. Sometimes I can get stations to come in, but rarely without interferece to the point where I can hear nothing else.

×

3 Answers

Wayne Norman

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Dec 06, 2009
Wayne Norman
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 06, 2009
Answers
2
Questions
0
Helped
1475
Points
2

For the Aspencade GL1200

Remove the radio and get a small fingernail file and clean each prong on the radio and the plug in the dash, once you are done pull each prong up about halfway on the radio and re-insert into the dash. WaLa...

The mute button volume is controlled by the center knob on the radio, you can set it anywhere you like.

A

Anonymous

I have goldwing 1984 just bought, the radio doesn't work. seems like all controls, am/fm runner work
just don't have any sound. Does the mute switch on left handle bar effect any ? any one has experience will be appreciated. [email protected]

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Oct 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Oct 23, 2009
Answers
1
Questions
0
Helped
1265
Points
1

[email protected]

Try checking the wires to your potentiameter. (Front/rear speaker control knob.)

These wires can break at the soldered joint.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Radio goldwing

with your key insert by the clock box and hold it side ways as someone else pulls radio straight out.
0helpful
1answer

I have a 84 aspencade with panasonic am am cassette player the vol dosent get real loud when im on the hywy or in town does that yr goldwing have a power booster on it if not how can i install one plz help...

get a new stereo get rid of that outdated one they even have remote controls for them and different media options such as jump drive or sd cards. Same kind you find in cars and trucks.
2helpful
1answer

How do I remove the radio from the fairing on a 86 goldwing

In between the radio and the digital clock you will see a key hole. Using the ignition key, this will unlock the raio cassette unit and you can pull the entire unit out of the fairing. There are no bare wires, only copper contacts. By bending each of the contacts at the rear of the unit out a little, you may have better contact when the unit is inserted again. The contacts do become compressed over time and this might solve your problem.
6helpful
2answers

Record from radio to cd

i don't think this stereo has a cd burner your best bet would be to use online radio (most stations do this now) record straight to your computer and burn cd from there
5helpful
5answers

My radio on my82 honda goldwing dont have sound

there are 3 fuses behind left turn signal with holders that open like a clamshell. one of these is for the amp, its a 15 amp fuse i believe
3helpful
2answers

My radio on my82 honda goldwing dont have sound

There are several possibilities. First, if the clock and cassette door are affected, it is a low voltage feed issue.. bad connectors, corroded terminals, etc. This voltage feed is from the 5 amp fuse in the very bottom of the relay box to the right of the main fuse block (i.e. not in the main fuse box).. clean check this fuse... If the low volume is FM only, it is internal to the radio.. in this case, another symptom is that the search/seek feature never locks on a station.. Typically this is a problem with a component on the board.. only place I know that works on them is Sierra Electronics in Troy Ohio, but others probably exist..
Not finding what you are looking for?

1,275 views

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...