Question about 2005 Yamaha Ybr 125

2 Answers

Would not start...replaced battery. No igntion light when you turn the key to start. No power, nothing happening.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Yamaha Master
  • 4,536 Answers

Is batt charged rite--are connections tite--chec fuses-some that appear good can be bad--starter key switch may have issues-try moving and inspectin harness--buy a clymer manual for procedures

Posted on Apr 06, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Check the fuses with a multimeter. Be sure the battery is charged up.

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn key wouldnt start


Possible causes, flat battery, faulty alternator, coil or starter motor,though sounds more like power problem, do you have power to lights, radio etc when key is turned on even though nothing happens.

Jun 12, 2012 | 2004 Chevrolet Impala

1 Answer

Ve.comso heres my issue: when i turn the key most of the time nothing happens. but sometimes my dash lights up and then the truck starts. i recently had to boost the truck; could i have fried the starter...


Check the battery terminals first to make sure they are tightened and not corroded, if you have a way to check the battery that would be good [ you may have a voltage gauge on the dash, when you first turn on the key it should register at least 12 volts, and not drop below 9 volts when cranking ], a load tester is the best way. If all these things are ok, then I would suspect the igntion switch is faulty as it seems you have no power to anything at times.

Mar 17, 2011 | 2006 GMC Sierra 1500HD

1 Answer

I have a 2001 Sienna. I find in the morning the radio will sometimes lose it's presets. Also,the van starts fine but the odd time, when you go to start the engine, nothing happens when the key is turned. ...


If it starts without a jump, i would say it's the igntion switch that cuts off power to the radio at times. If it does need to be jumped, then replace the battery.

Jan 10, 2011 | 2001 Toyota Sienna

1 Answer

Have 2005 yamaha roadstar wont start no power. Batterie and fuses are good any idea what would cause this


Here are a few things to try to help you diagnois your problem.
1.Check for corrosion on battery terminals and the fuses.

2.Fuses are good - Did you check the fuse on the top of the solenoid?

3. Take a screwdriver and jump the solenoid wires to start the engine. If it starts, then your starter is good. (could be a bad solenoid - but lets check some wires first)
Your solenoid operates when you hit the start button.
Your start button won't work until you turn the on/off switch on.
Your on/off switch only has power when you turn the key on.
4 Use a test light to test the following:
Right Handlebar switch house - Test to see if you have power to on/off switch - Turn your ignition key on & off to see the testlight come on - if light comes on that means your igntion switch is good. If no light, the problem is in the igntion switch. or the main fuse to the igntion switch is bad.

If the light came on then you have power to one side of the on /off switch - test the on /off switch by turning it on and off. When switched to on you should have power to the other side of the on/off switch which is sending power to the rest of the bike which includes your starter button.
Test your start button with the test light by putting the test light on the solenoid - Turn key on - turn on/off switch on - push start button and see if the test light lights up. If the test light lights up that means that your solenoid fuse may be bad. It is located right on the top of the solenoid. If the fuse is good then that means your solenoid is bad. Replace it with a new one.
If the Test light did not come on then your starter button is not making contact and needs fixed or replaced.

So follow the power with the test light until through each component until you come to the faulty one.

NOTE: If its a blown fuse, check your wiring. You'll have to find out why the fuse blew and fix it or your fuse will just blow again. Could be a short somewhere, installing a battery wrong will blow fuses.

Dec 03, 2010 | 2005 Yamaha Road Star Silverado

1 Answer

My 1992 Buick Park Ave won't start part of the time. It isn't the starter, or the battery or cables to it, or the ignition. The engine purrs once it starts and it isn't an engine problem. It is just like...


Yeah it could be the igntion switch, specially if you don't even hear a relay clicking. This could also be caused by a loose connection aroun the battery area, check all the connection around the main fuse under the hood, and around the battery area. Next time it happens turn the key to on position and check voltage to a main fuse. If the 12 volt is missing then the problem is around there somewhere.

Aug 13, 2009 | 1992 Buick Park Avenue

1 Answer

Car won,t start


could be a bad igntion switch. Or a connection from the igntion switch.

Aug 04, 2009 | 2005 Peugeot 405

2 Answers

Engine won't start!!!!!


It's possible the "anti-thielf" system has been failing and went out while you was driving. If the ignition key has a chip in the shaft of the key your car has anti-thieft. It's possible the system doesn't reconisethe igntion key and shut the system down. Try using another igntion key if it came with 2 keys. If the engine started you'll need to get the other igntion key replace.

Apr 18, 2009 | 1995 Pontiac Grand Am

1 Answer

When i turn the key on my 99 tiburon nothing happens.


check for power at the igntion wire at the starter while someone turns the key into the start position, if no power is recieved at the wire check it for brakes, if all is good with the wire change ignition switch, have had this problem on hondas as well.

Feb 21, 2009 | Hyundai Motor 1999 Tiburon

Not finding what you are looking for?
2005 Yamaha Ybr 125 Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...