Question about Suzuki RGV 250 N Motorcycles

1 Answer

My suzuki gn 250 starts fine but cuts out when i put in first gear?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 747 Answers

If there is no other engine problem then it could be as simple as having the side stand down. There is a switch on the side stand that will kill the engine if you put it in gear while the stand is down.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your question? FIx CDI Box that give spark to the plug on a Suzuki GN 400 1981


  1. 1981 Suzuki GN 400 L specifications and pictures - Bikez.com

    www.bikez.com/motorcycles/suzuki_gn_400_l_1981.php The 1981 Suzuki GN 400 L and all other motorcycles made since 1970.Specifications. Pictures. Ratings. Discussions.

Jun 21, 2015 | Suzuki Motorcycles

1 Answer

Stalls when put into gear


the kick stand safety switch could be bad.check it out

Feb 19, 2014 | 2000 Suzuki GZ 250 Marauder

1 Answer

Stalls when put into gear.


check out your side stand safety switch

Feb 19, 2014 | 2003 Suzuki GZ 250 Marauder

2 Answers

Cutting out when put into gear


if ur able tu revbike in nuetral and no issue then its probly a clutch glitch--need to ajust it--at handlebars or engine case-getta clymer manual for details

Feb 19, 2014 | 2000 Suzuki GZ 250 Marauder

1 Answer

Suzuki gn 250 starts dies when you touch throttle.


Prob with Suzuki....blocked main jet or major air leak.
Prob with F150 MAP Sensor disconnected or not functioning

Nov 17, 2013 | 1991 Ford F150

1 Answer

1997 Suzuki Intruder VS800...starts, runs, stalls


Hi, Anonymous the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Intruders Alert
Total Motorcycle Forums
Suzuki VS700 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual

May 12, 2017 | 1997 Suzuki VS 800 Intruder

1 Answer

Gz 250 engine dies when put into gear


Hi,
Check the side stand switch and switch on clutch lever. Both can cause problems. In this case the switch on the clutch lever may well be sticking and the engine is being stopped because the system believes you have started the bike in gear with the clutch engaged. ( Which is obviously not the case)
Cleaning / spraying with WD 40 or similar in the area of the switch may be all that is needed.
Hope this helps
Regards Stan

Apr 27, 2012 | 2001 Suzuki GZ 250 Marauder

2 Answers

2008 rmz 250 4 stroke i was riding it and all of a sudden it cut off and now the kick start wont move but shift through gears just fine i think the top end is locked up i'm not sure could the piston of...


Remove the spark plug, put the bike in fourth or fifth gear then try a jump start but with the key turned off. If the rear wheel locks up when you jump on and release the clutch then the piston has probably seized up OR the kick start-to-clutch hub gearing is messed up. The best thing to do is to remove the left engine side cover and look at the kick start mechanism. You may need to remove the clutch assembly for a full inspection. With the clutch removed the rotor ( crankshaft flywheel ) should turn. If it will not turn then a seized piston, broken cam chain or dropped valve is likely. If the rotor does turn then the kick start mechanism is the problem. Please rate my answer. Thanks!

Mar 26, 2011 | 2004 Suzuki RM-Z 250

1 Answer

I was driving in 5th gear for about 30 kms and doing about 80km/h. when i reduced speed and geared down to 4th, i found that the gears became very sticky. i slowed down further and had to step down on the...


no --not normal
it indicates that when gearing down the clutch plates are still engaged and driving the gears making selection difficult
it is from incorrect oil used in the clutch / transmission
take it to an accredited suzuki proficient service center and discuss the problem with them
get quotes

Apr 17, 2017 | Suzuki 250 SB Motorcycles

3 Answers

Starts fine. sounds fine but dies upon putting it in gear


Your kickstand switch is either broken or out of position. The bike kills the engine as a safety feature if it thinks the sidestand is down and the bike is put in gear while the engine is running.

Apr 12, 2009 | 1993 Suzuki VS 800 Intruder

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...