Question about 1992 Yamaha FZR 600
Hi, Bcapella01 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
6. Faulty ignition coil or ignition / electronic module
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
There is no such thing as Weak Spark dbw dirtbikeworld net Members Forums
View topic 91 FZR600 with no spark
OEM parts for Yamaha
Posted on Apr 01, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Really...strange what you need to do is see if the bike is running too fat. So...warm her up witha fresh set of NGK! spark plugs. After the bike is warm take it down the street and back. When your on the way back get on the throttle and accelerate then shut er down and coast it into the garage. This will give an acuurate read on the spark plugs at operating temperature and under a load. Pull all the plugs. If they are brown like coffee with cream that means carbs are adjusted correctly. If they are black and wet too rich and if they are white or very light brown too lean. Other problems may be oil soaked plugs from loose top end parts. Maybe valves or guides.
Posted on Mar 05, 2009
Sounds like the plugs are fouled out, I would pull them and make sure they're about the color of a paper bag. If they're all sooty and wet you most likely have a rich condition. I would take the carbs out and clean everything and pop in a new set of plugs. I have a 87 Fz600 that was acting up until I cleaned the carbs.
Posted on Apr 20, 2009
hi m8,, pretty much any fzr motor will fit,, the only thing thats different is the water pump pipe from the rad to the pump at the bottom of the motor,, so may have to re route it,,check that 1st b4 gettin the motor, appart from that all engine bolt holes will line up and the rest will fit,, cheers m8
Posted on Apr 28, 2009
Tips for a great answer:
Jan 02, 2014 | 1992 Yamaha FZR 600
Nov 10, 2012 | 1992 Yamaha FZR 600
Nov 07, 2012 | 1992 Yamaha FZR 600
Aug 09, 2012 | 1992 Yamaha FZR 600
Mar 18, 2012 | 1992 Yamaha FZR 600
Sep 15, 2010 | 1992 Yamaha FZR 600
Jun 19, 2010 | 1994 Yamaha FZR 600
May 19, 2010 | 1994 Yamaha FZR 600
Apr 20, 2009 | 1994 Yamaha FZR 600
Oct 31, 2017 | Motorcycles
62 people viewed this question
Usually answered in minutes!