Question about 2000 Yamaha V Star 1100 Classic

1 Answer

Starts but takes a very long time to warm up. continually stalls when throttle applied. have to keep feathering throttle to keep running . spits ,sputters , backfires until fully warmed up

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Yamaha Expert
  • 191 Answers

ColdI engines require a richer mixture to operate smoothly...so they have an enricher (aka choke).
If you are finding you need to keep the choke on longer.....you may have a lean mixture than normal.nother
Start by inspecting the carb and intake manifolds for any leaks (loose fittings....cracked hoses) that could be drawing in air, leaning the mixture.

Another common issue with bikes that have sat over winter...is plugged idle jets.....the fuel varnishes the tiny orifices in the carb. You could try a product like Seafoam in the fuel tank....run it abit to get the treated fuel in the carbs then let it sit overnight...allowing time for the chemical to work. Since the bike runs fine warm...this may clear things up for you.

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I put in another battery in my 2000 dogde truck.now it wont idle on its own.


Robert, You may have to try this relearn procedure.
Warm the engine, but hold your foot on the throttle as necessary to keep the engine running.
  1. With vehicle in Park, slowly release the throttle so that the engine will idle on its own. You may have to work at this a bit.
  2. Let the engine idle on its own for about one minute.
  3. Continue to let the engine idle and with your foot on the brake, place the transmission in Drive and let the engine idle for another minute.
  4. Continue to let the engine idle with your foot on the brake and the transmission in Drive. Turn the A/C on and let the engine idle for another minute with the A/C compressor running.
  5. Turn the ignition off and wait a minute. Check the attached links,
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Battery Disconnect or Replacement Problems

https://ca.answers.yahoo.com/question/index?qid=20100517211203AAw91qa

http://www.automotiveforums.com/t454660-click_here_for_instructions_on__quot_how_to_idle_relearn_quot_.html

The Dodge Relearn Procedures eHow

Mar 10, 2016 | Cars & Trucks

1 Answer

My 91' accord is spitting and sputtering in the


You check cam timing? Also valve adjustments.

Oct 15, 2014 | 1991 Honda Accord

1 Answer

Fuel system running rich and stalling


Sounds like it is slightly out of time.

Apr 14, 2014 | Ford Cars & Trucks

1 Answer

Stalls when braking


Vacuum leak is cause

Mar 02, 2014 | Volvo Cars & Trucks

2 Answers

2000 gmc serria wont stay running unless you feather the gas pedal after a minute or so it will be fine after it warms up it runs great


you have a bad idle air control valve and also a thottle position sensor. both sensors are located on the throttle body

Nov 25, 2012 | 2000 GMC Sierra

1 Answer

Mx6 not running right


there is an idle valve on the throttle body. it opens to keep a cold engine running, then closes when the engine warms up. if it sticks open, car will run good for a few seconds then stall the warmer it gets

May 27, 2009 | 1993 Mazda MX-6

1 Answer

Craftsman gas leafblower


All small engines take a few minutes to warm up...especially so as they age.

You have to learn to 'feather' the throttle to very, very slowly increase the gas.

After it is warmed up, you are much more likely able to rev it up...release, etc.

I've had many over the years, and this is a very common problem...that you learn how to handle.



Nov 06, 2008 | Garden

Not finding what you are looking for?
2000 Yamaha V Star 1100 Classic Logo

707 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...