Question about 2007 Yamaha V Star Classic

1 Answer

Starts with choke fully out,but dies when when I start to push it in

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Yamaha Expert
  • 191 Answers

First inspect all hoses and fittings on carb and intake manifolds to heads to ensure you have no vacuum leaks drawing in air...leaning out the mixture.

Has the bike sat over winter? Pretty common for stored bikes to have varnish plug up the small orifices in the carb...and they affect idle. A product like Seafoam added to fuel tank and running the bike to get the treated fuel in the carbs and letting it sit a day may start dissolving the deposits.

Posted on Apr 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P-219 starts but dies


turn on the choke. push the prime ball 6-7x then start by pulling.
once it starts let it warm up 20 seconds and close the choke.

Sep 26, 2014 | Garden

1 Answer

Engine only runs with choke on. Blue smoke comes out and engine runs rough or not at all


sounds like you have a bad Ring on the Piston or a blown head possibly. Blue smoke means Oil is getting into the combustion chamber. Full choke means you have to give this 'broken' engine a lot of gas to compensate for it's problem.
Do you change the oil at least once a year? Filthy oil or a lack of oil will kill an engine

Aug 06, 2012 | Yard Man Garden

1 Answer

My MTD Yard Machine Y2500 starts fine and works with the choke partly closed. It also idles fine with the choke fully closed but stalls when I press on the throttle when the choke is fully closed.


when the choke is fully closed your choking the fuel out,, thats why when you give i t gas it dies , its not supposed to run with the choke on and getting fuel , use the choke only until the motor warms up to operating temp,, then open it,, and you should be fine,

Jun 01, 2011 | Mtd Garden

1 Answer

Have new 450 and is very difficult to start. Lost or didn't get book. How do I start it and re-start it while still warm??


Start procedure is, push the primer as many times as it takes to 3/4 fill the bulb ( you cannot over prime it ) pull the blue choke lever fully out,place the saw on the ground with your right boot through the back handle, crank the engine until it fires once, do not continue to crank the engine with the choke out ( they will not run on choke, only fire ) push the choke fully home, crank the engine until it starts, blip the throttle trigger to bring the saw to idle, warm engine, pull the choke fully out and push in again without cranking engine, this will engage the part throttle, crank the engine until it starts, blip the throttle to bring the engine to idle.

May 18, 2011 | Husqvarna 450 e-series 18" Chain Saw

1 Answer

Hi there i can start it up with full choke it starts it runs it clears its self i push the choke off it runs fine for about 40 seconds then its like it starts to run on 2 or 3 cilinders chokes up then dies...


check your carburatures. Sounds like they could use a tune up. Seems as if they are not getting enough fuel after it is warmed up, that is why it runs good when choked. Also check your air filter first.

Mar 29, 2011 | kawasaki ZX-9R Ninja Motorcycles

1 Answer

My Mod. SM705 trimmer starts w/the choke on but the engine dies as soon as I press on the throttle trigger. What is wrong and how can I fix it?


you need to keep the choke on at least one half till the trimmer warms up. It may take 5 minutes to get to the point where you can take the choke off fully.

Mar 22, 2011 | Poulan Garden

1 Answer

How to start a gas makita 14"concretemetal saw


The strarting procedure is much the same for all chainsaws/power cutters, switch the ignition on, pull the choke fully out, depress the deco valve if it has one, lock the half throttle button if fitted, crank the engine until it fires once ( it will not run at all on choke ), do not continue to crank after the first fire or you will flood it, push the choke fully back in, crank the engine until it starts.

Mar 03, 2011 | Makita Garden

2 Answers

Starts and then runs wide open.


SOUNDS LIKE THROTTLE NEEDLE STUCK OPEN CHECK THROTTLE LINKAGE STICKING OR RETURN SPRING

May 19, 2009 | Husqvarna Chain Saw 20" Bar

Not finding what you are looking for?
2007 Yamaha V Star Classic Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...