Question about 2001 Yamaha YZF-R1

1 Answer

When I pull off I have a flat spot on my bike and then again at about 170 km an hour.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,627 Answers

Hi, Tom and the usual suspects are:
1. Throttle cables misaligned or misrouted.
2. Damaged or restricted fuel tank venting system.
3. Intake system air leak.
4. Vacuum piston malfunction.
5. Pinholes or torn diaphragm.
6. Accelerator pump leaking or no output.
7. Plugged bowl vent or overflow.
8. Fuel level in bowl too low.
9. Restricted fuel supply passages.
10. Plugged jets or passages.
11. Worn or damaged needle or needle jet.
12. The enrichner valve not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/161-09-14-r1-mechanical-help/273144-pcv-flat-spot-suggestions-needed-please.html
Faulty TPS symptoms for 2007 R1
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Sep 01, 2016

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gregg201
  • 40627 Answers

SOURCE: Hello i have a yamaha majesty yp400 i found out today that my bike should go 170 km but mine goes only 120 130 km maximum can u help

Hi, Jamal you may want to clean your air filters and make sure the throttle cables are adjusted for maximum slide opening for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.yamaha-motor.com/assets/service/manuals/2008/majesty_lit-11626-21-34_1545.pdf
OEM parts for Yamaha
http://majestyclub.cz/download/M400_servis_manual.pdf
2008 Yamaha Majesty Scooter Review Motorcycle USA

Posted on Jun 11, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flat spot between 5000 & 6500 rpm


Has something to do with you timing and valve adjustement. Get it tuned the way it supposed to. Or just get performance. Its hitting a flat spot because the valve are floating inside the case when it goes too fast and doesn't have the proper performance added to the inside components.Have to have the right components to fit together correctly for the exact way you want your bike to run.

Dec 19, 2013 | Motorcycles

1 Answer

When riding my Hyosung gt250R '11 the digital speedometer fluctuates randomly between 0 - 300 km/h and iv'e noticed greatly increases the rate at which kilometers are recorded on the odometer. I have...


Hi, Jordan the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://files.hyosungmotorsusa.com/GT125_250_Service_Manual.pdf
https://www.alpha-sports.com/Parts/H_GT250R.htm
HYOSUNG GT 125R Manual
Hyosung GT250R 2011
Hyosung GT250 Wikipedia

Jul 03, 2017 | 2011 Hyosung GT250R

1 Answer

2000 gsxr600y Flat spots and rough running at 8 and 11 thousand rpm, won't pull passed 11000 from 4th gear up as running so rough


Full disassemble of carbs is needed. Thorough cleaning on jets and airways, vacuum and pilot screw adjustment must be done too.
Check the spark plugs for lean mixture indication and replace them if necessary.

Oct 20, 2012 | 2000 Suzuki GSX-R 600

1 Answer

Ms. Driva Reck drove from her home to the service station at 48 km/h. She returned home by bicycle at 16 km/h. The entire trip took 4 hours. How far was the service station from Ms. Reck's home?


Ms. Reck's trip on her bike took 3 times longer (48/16ths) so the service station was 48 km from her home. It took her one hour (1x48km)= 48km) to get there and 3 hours to get home (3x16=48km) for a total of 4 hours...

Nov 22, 2009 | The Learning Company Achieve! Math &...

1 Answer

Flat spot on pull away


I would take it in straight away, sound slike there is a problem with your throttle machanism or worse yet in your ecm or efi module

Oct 09, 2009 | 2008 BMW R 1200 GS Adventure

1 Answer

Flat spot when in first and second gear only when opening throtel


if it is carburated thehe jetting in the carbs checked, if its fuel injected then adding a power commander so that the fuel mixture can be tuned would be reccomendad.

Mar 04, 2009 | 2003 Buell Lightning XB9S

1 Answer

How do u set the carb on a 86 mazda sl auto


the flat spot and hard starting is caused from a faulty accelrator pump or a blocked discharge jet in the pump circuit i would be putting a kit in the carby to improve mpg

the only adjustments on the carby is idle speed and idle mixture which dont affect cars mpg

Dec 29, 2008 | 1987 Mazda 323 4-Door

1 Answer

Flat Spot in Daihatsu Charade 86 model 3 cylinder Manual /998cc


Check your carburettor secondary dashpot is engaging. Check the short hose that comes form the carby body to the dashpot for cracks.

Dec 22, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
2001 Yamaha YZF-R1 Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...