Question about KTM EXC 200 Motorcycles

1 Answer

Trying to remove my fork seals from 2005 ktm exc 200. I have the cartrige out but i cannot get the tubes apart or the axle end off. Is there a way the tubes come apart.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 738 Answers

Hi, i presume from your thread you have removed the bolt securing the damper to the leg at the axle end, and you are having a problem removing the stancion from the leg, normaly you will have to remove the fork dust seal from the top of the fork leg, you will then expose the main fork seal which will be secured inside the fork leg by a clip,you will need to remove this, as the bushing inside the fork. Is secured to the stancion underneath the fork seal the only way to separate this, once the seal clip is removed, fasten the lower leg in a vice, warning fasten in the axle area and not the tube area to save damage, once secure push the fork tube all the way to the bottom, then pull up sharpley, repaeting this action will give a hammer effect from the inside of the fork, when reasembling before fixing the damper unit replace the fork stanchion, bushing, washer and seal, holding the tube. Upermost will reduce the risk of damage while replacing the seal in the moving area

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fork oil capacity for KTM 200 EXC 2005


https://youtu.be/kUzEuHYjodo

Oct 06, 2012 | 2005 KTM EXC 200

1 Answer

Replacing fork seals on 1995 yz 250. It bene a while since replacing fork seal on anything. My harley was easy. I cant figure out where to begine. Ive taken a good portion of the right fork apart and have...


undo the big allen bolt on the bottom.(a rattle gun helps)
remove the dust seal
remove the circlip
use the fork leg as a kind of slide hammer to separate the top and bottom, and this will pull the seal out.make sure its clean and some WD helps the seal move
It may help to put the axle in and clamp the axle in the vice to hold the bottom end

Feb 26, 2011 | 2004 Yamaha YZ 250

1 Answer

Head tourque wrench setting


Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nuts on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs
TF

Apr 19, 2010 | 2005 KTM EXC 200

1 Answer

Fork seals leaking


I recommend sending them out, or get a factory manual. You need fork seal drivers (The correct size) and a solid mechanical background with some good tools. They ar not a simple deal. If you feel comfortable in trying it, get a good manual, and it will walk you through it.

Mar 25, 2010 | 2006 KTM 125 EXC

1 Answer

Ktm output shaft oil seal


if you are lucky there is a clip behind the front sprocket remove both then pop the seal out drain gear box oil first though. if not which i think is most probable the engine will need splitting if you are good with spanners it is quite easy being a 2 stroke .in brief remove engine remove bore and carb in one lump remove sprocket gear lever split g-box .seal up push old seal out, from outside in, fit new then reverse prosses. a good manual will help.

Feb 12, 2010 | 2005 KTM EXC 250

1 Answer

530 exc spacing between front fork & spacer


front axle installation: looking at the front of the bike:

slide the wheel into position and insert the axle from the left. with axle now through the right hand fork, install nut and tighten the left fork pinch bolts to secure the axle for tightening the nut. tighten the nut to 29.5 ftlbs. and loosen the left pinch bolts. now tighten the right pinch bolts and compress the front suspension while the left (from front) is still loose. now allow suspension to rest naturally and tighten all 4 pinch bolts to 11 ftlbs.
your done.......the axle is tighten against the rotor side and the other fork is then tighten in it's natural position so as not to cause premature seal and bushing failure and increasing stiction.

Sep 27, 2009 | 2008 KTM 530 EXC-R

1 Answer

How to seperate upper and lower fork legs - like 4357's ?


Remove upper caps, oil and springs. Slide the upper tubes down to the fork foot, remove a red plastic ring with 3 slits clamped around the chrome tube. Now u can slide the tubes apart.

May 30, 2009 | 2001 KTM EXC 125

2 Answers

Front fork oil change.


Kenji,
be careful, the front forks are under a spring. Just keep going and BE CAREFUL.

Jan 16, 2009 | 2005 KTM EXC 525 Racing

2 Answers

How to fill the front suspension on a ktm exc 2001


If you get the sevice manual or contact a dealer to get the correct oil amount for your bike, they need to know the model and year, you have to have the forks off the bike. take the fork caps off, take the springs out compress the upper fork tube all the way and add the specified oil. if they also give you the measured amount from the top that's the best way to get both fork oil levels exact. there is a special tool that you set the oil level in millimeters and it sucks out the oil to the right level, but before you do that step after adding the oil always pull and push on the cartage rod several times to remove air from the cartage tube. you will hear the air coming out and you will feel the changes in the cartage rod as the cartage tube fills up with oil and the air is removed.
something i'm confussed on though is if you replaced a seal you would have had to brake down the fork to replace it. you would have poored the oil into a container, cleaned all the internal parts,and used a fork seal driver to install the new seal. part of your question asks where do i put the oil in? thats in the open end of the fork after you have taken off the fork cap. It sounds to me like you only replaced the dust seal on one fork. that is not going to fix your leaking fork. you need to replace the oil seal thats pressed inside of the top fork tube.

Dec 01, 2008 | 2008 KTM 200 EXC

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...