Question about 2003 Yamaha V Star Classic

1 Answer

I have 2003 v-star classic with the silverado package. Along each side of the main head lamp it has the running lights on the front. I have lost the use of the two side running lights. Can you guys show me the schematics or give me the knowledge to solve this problem. Was this a problem with the same year model. It seems My friends 650 v-star the same year model had the same proble.m

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have had the same problem, same bike. Dealer installed the additional running lights so they come on with the low beam headlight. Go off when the high beam is turned on. Mandatory for my state inspection procedure.
Possible solution to problem: open the headlight housing, should be a solid green wire going to the headlight bulb. Dealer spliced wire for running lights into this green wire.
Splice was just a crimp on splice. Vibration on a bike wipes out this type of splice quickly.
Got rid of the crimp on connector and did things the old fashioned way, used solder for the connection. Vibration does not bother the soldered connection.
Took care of the problem

Posted on Apr 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the extra lights on either side of the head light they won't come on why


Who wired them and what way are they connected? Are they linked in to the headlights or are they separately switched? Generally if the lights are linked to the headlight but don't come on with the lamp then it's likely the connections are dodgy. Check and if necessary, re site the earth connection to your bike frame and the positive supply connections. For piece of mind you can get a switched auxiliary lighting wiring loom from an auction site and use that for your auxiliary lights.

Jul 14, 2014 | 2003 Yamaha Road Star Silverado

2 Answers

Are the head lights on all the time 1999 chevy silverado 1500 4x4


On a 99 chevy silverado if equipped with auto headlamps there is a sensor on the dash near the front center of dash a small black bubble. If it is covered it will cause the lights to stay on. The day time running lights are typically seperate from the head lamps

Jul 13, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

I need to get the spare tire to come down on my 2008 silverado to change tires and have lost the manual... HELP


looks like somewhere around license plate is access to shaft to lower tire (usaully uses some part of tire tools)

May 19, 2011 | 2003 Yamaha V Star 1100 Classic

1 Answer

My 2002 1100 v star classic does not run on the front cylinder, has spark, has compression, front cylinder stays cold. Back cylinder runs on spark, fuel, compression, no problem. Give any throttle and bike...


How good did you clean the carbs? The idle jets usually have small holes along the side, and if they are blocked with dirt or bad fuel, it won't idle. Make sure ALL of the passages are clear, and all jets are clear, through the center and holes in the sides of the pilot jets.

Aug 03, 2010 | 2002 Yamaha V Star Classic

1 Answer

How do you replace headlight? skipper skipper39@gmail.com


I just replaced mine about 30 min. ago. There are two Phillip head screws at about 4 o'clock and 8 o'clock on the main body of the head light. Do not mess with the two screws on the ring on front of the headlight. Now the ring and the glass part will separate from body of the light. Unplug the amphenol plug and lay the light face down on a towel on your work bench. Remove the black plastic cover and then release the locking spring. The halogen bulb will lift out. I bought a replacement bulb at O Riley's for less than ten dollars. Now reverse the procedure.

Jun 17, 2010 | 2003 Yamaha V Star 1100 Classic

1 Answer

Looking for instructions to install Yamaha silverado windshield


Hi, Wbdragon01 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.starbikeforums.com/forums/49-v-star/2965-vstar-650-classic-windshield-instructions.html
Installing National Cycles Windshield on Star 650 Classic
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Sep 27, 2009 | 2003 Yamaha V Star Classic

1 Answer

Trailer running lamps will not work


Your running lights/marker lights and tail lights are on the same circuit. I all thetruck lights work, the problem is in the plug or plug harness.

Jul 01, 2009 | 2007 Chevrolet Silverado 2500HD

2 Answers

Blowing turn signal fuse


Every time you turn bike on front lamps are cuasing fuse failure. you have a running light pwr pinched. diconnect battery ground and secure lead so it cant get back to post. Use an ohm meter check lights pwr leads to ground looking for meter to see if continuity to chassis ground exsists. ohm's found in milla or killa values should not be mistaken for short to ground more like the resistance through light fillament. best checked with all bulbs to circuit removed. Continuity through test leads should be subtracted from test value good connection .1ohm no connection = OFL or open.

Feb 08, 2009 | 2003 Yamaha V Star Classic

Not finding what you are looking for?
2003 Yamaha V Star Classic Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...