Question about 1971 Aermacchi Sprint 350
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first ya need to suspend it in the air using a bike jack loosen chain tension on it unbolt the axel and it should come out from the rear of the bike
Posted on Mar 27, 2009
harley recomends that you use their oil but i would be carefull because it is a cynthetic now if you were using regular oil what that will do is clean all the old build up out of the motor this can be bad because after time there are pin hole leaks that occure but the build up stops it from leaking but if you use cynthetic you cant go back to regular oil it will gum up on you and ruen your motor so you got to find out what has been put in it. but use a 10-30
Posted on Jun 05, 2009
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
Posted on Jun 06, 2009
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
Posted on Jun 28, 2009
SOURCE: yz125 no spark
G'day i am a . YZ 125 j ...lets see now! You could perform these tests yourself.Check your plug CAP,if in doubt replace it with a new one. Take the below ohm figures and see if they match up. Pulse coil: white/blue and white/red= 310 ohms. low speed coil: Green/white and Black/red= 900 ohms. high speed coil: Green/blue and black= 55 ohms. hope this has helped in some way to helping you solve your problem.If it has please leave feed back.Ride hard , see ya,Tabbycat
Posted on Jul 24, 2009
Tips for a great answer:
Aug 11, 2017 | Harley Davidson Motorcycles
Jun 12, 2017 | Harley Davidson Motorcycles
Jun 02, 2017 | 2004 Harley Davidson FLSTC - FLSTCI...
May 12, 2017 | Harley Davidson XL 883 Sportster...
Apr 05, 2017 | Harley Davidson Motorcycles
Apr 02, 2017 | 2007 Harley Davidson FLSTC Heritage...
Mar 04, 2017 | Harley Davidson XLH Sportster 883 Hugger...
Nov 25, 2013 | Harley Davidson Motorcycles
Apr 15, 2009 | Harley Davidson 2007 Harley-Davidson FLHX...
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: