2004 Toyota Sequoia Logo

Related Topics:

Posted on Jul 12, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2004 Toyota Sequoia. I have lost power to the 12V connections in front (2) and the single near the rear hatch. The primary 12V connection (near the ash tray) still has power. The fuse box labels don't tell me enough to see which one serves these 3 12V outlets. I checked them all. I have pulled all the fuses and looked at them and they all look good. Obviously one isn't. Any hints to which fuese serves those outlets?

1 Answer

theodore ritter

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Toyota Master 475 Answers
  • Posted on Jul 18, 2017
theodore ritter
Toyota Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Aug 20, 2011
Answers
475
Questions
0
Helped
289680
Points
1168

They are usually labeled power outlet or cig lighter, check the fuses with a test light or voltmeter, they may look good but may not have power to them .

3 Related Answers

Anonymous

  • 57 Answers
  • Posted on Dec 02, 2008

SOURCE: 2004 corolla fuse box

open the driver's side door and look on the side of the dash. If it's not there, check the passenger's side on the center console. If not there, check under the hood.

Ad

Anonymous

  • 1861 Answers
  • Posted on Dec 08, 2008

SOURCE: No power to cigarette lighter/power outlet (front & rear)..

Replace the 15 amp ACC fuse that is in the fusebox under the dash. See if this eliminates your problem.

Anonymous

  • 1 Answer
  • Posted on Mar 08, 2010

SOURCE: I have lost all power to the rear hatch of my 2005

I had the same thing happen...I already had the rear door taken apart because the latch mechanism had failed and I was replacing that (not too bad a job: $100 part and 2 hours)...while I had the door apart I tried tapping on the window motor with hammer to get it working again...that did not seem to do anything. I then started looking at fuses.. There are 3 fuse boxes under the hood, and 1 panel by the driver's left knee. The top left fuse in the driver's left knee fuse box was labeled "TAIL". I pulled that one and even though it was not burned through...it looked a little funny (had some discoloration on the contacts like it had been getting hot). I replaced that and then shut the rear door and started up the engine. What do you know..everything works. I think it was likely the fuse...but who knows. Maybe this will work for someone else too.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2005 Sequoia Limited, Rear/Hatch door does not open.

remove rear panel and check latch for damage or linkage disconnect --also check electrical connections to other components
0helpful
1answer

2006 Toyota Sequoia. The front windshield wipers won't come on. They did sporadically at first but now not at all. The washer fluid motor pumps fine and the rear wiper also works. Front wipers only.

Tap on wiper motor while it is turned on and see if it moves . Also check the connection at the motor for loose connection and for corrosion . Unplug it and plug it back until it clicks to lock .
0helpful
1answer

How do I fill the rear washer fluid on a 2002 Toyota sequoia

On alot of SUV's, you have to open the back hatch or tailgate, and there is a washer fluid reservoir either in the door jam of the hatch, or inside the back of the truck.
5helpful
1answer

2004 Sequoia B2S1 o2 sensor - where is this located and is it easy to replace? Thank You!

Toyota Sequoia has 4 oxygen sensors... two on each side. The ones in front of catalytic are position one, and, after are position 2.

Bank 2 is on passenger side, Bank 1 is on driver's side.

Hope this helps (remember to rate and comment this free answer).
5helpful
2answers

I have lost all power to the rear hatch of my 2005 Toyota Sequoia. Rear defroster is out, power rear window is out, rear wiper is out. Is there a fuse to check?

I had the same thing happen...I already had the rear door taken apart because the latch mechanism had failed and I was replacing that (not too bad a job: $100 part and 2 hours)...while I had the door apart I tried tapping on the window motor with hammer to get it working again...that did not seem to do anything. I then started looking at fuses.. There are 3 fuse boxes under the hood, and 1 panel by the driver's left knee. The top left fuse in the driver's left knee fuse box was labeled "TAIL". I pulled that one and even though it was not burned through...it looked a little funny (had some discoloration on the contacts like it had been getting hot). I replaced that and then shut the rear door and started up the engine. What do you know..everything works. I think it was likely the fuse...but who knows. Maybe this will work for someone else too.
1helpful
1answer

Rear tailgate will not close because latch is not locking on 2004 Toyota Sequoia

You either have a rusted latch assembly, or a seized latch release cable, which connects to the release handle. Either can be the cause, this is a very common failure., Try some WD-40 on the latch, and see if you can work it with a screwdriver. If that does not help, you will need to replace the release cable.
0helpful
1answer

Broken rear hatch door handle on Toyota Sequioa

It sounds like the handle has become disconnected from the mechanism. You will have to remove the inner door panel and reattch. It is not a complicated or difficult job but if you get a professional it could cost upwards of $100.
2helpful
2answers

My rear hatch door handle broke i need to replace it. how do i replace it?

how do i get the rear gate panel off so I can replace the latch on the 2003 sequoia.
0helpful
2answers

Rear door latch replacement 2003 sequoia

Fig. The latch bracket shown is moved by loosening the mounting fasteners and sliding it as necessary. Matchmark the bracket to the door pillar before moving-1.8L Passat model shown
2helpful
1answer

2004 toyota sequoia front end shake

Replace the front rotors.
Refacing does not work on Sequoias. The metal removed to get the rotor "true" is usually below minimum safe thickness, and the vibration comes right back when it gets hot.
Not finding what you are looking for?

265 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...