Question about Harley Davidson FXSTB Night Train Motorcycles

1 Answer

How do i clean the glass cover inside my speedometer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 43 Answers

Your bet bet is to definately not introduce any type of chemical cleaner of any kind since any streak left behind will not be able to be wiped free.

Take a can of compressed air and going in from under the speedo aft of the front fork there will be a small access port. Carefully remove it and then give it a gentle spray with the compressed air, increasing as neccessary. If there is still a lot of dirt use only a pure cleaner for class the best two are 91 percent Isopropyl alchohol on a q tip or denatured alchohol (ethanol methanol mix) use cuation methanol is poisionous and make sure to do the work with ventilation going or outside.

Good luck.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the bulb inside the cooker of the B5741 cooker


Oven Lighting
Warning: There is a danger of electric shock! Prior to changing
the oven light bulb:
  • Switch off the oven!
  • Disconnect from the electricity supply.
Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
  1. Remove the glass cover by turning it anticlockwise and then clean it.
  2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C heat-resistant
oven light bulb.
3. Refit the glass cover.

25648864-wjkdtau3hzetwygkyoujq3j4-2-0.jpg
Dado

Apr 15, 2015 | AEG Ovens

Tip

Cleaning your inside scanner glass


Actually it's a very simple procedure!

Read this entire comment first...then start your procedures!

Disconnect the power cord, disconnect the USB cable, remove the top cover cable from the base by unscrewing the two plastic knobs, lift the top cover straight up. Place the top cover in a safe place.

On a clean, flat surface, turn the base upside down. On both ends you will find a total of four (4) black phillips head screws. Carefully unscrew these four screws and place aside. Carefully lift up the base and the top glass will separate from the base. Set the base aside. You have now exposed the inside glass for cleaning! It's that simple!!! Clean the glass by using a streak-free glass cleaner. Don't spray the glass, rather, lightly spray a clean soft lint free glass cleaning cloth, then wipe the glass. Don't press hard! Use good common sense1 There, you've now cleaned the interior glass. Reverse the procedure and you are finished. Wasn't that simple??

on Feb 15, 2009 | HP Scanjet G4050 Flatbed Scanner

Tip

Actually it's a very simple procedure! This this entire comment first...then...


Steps how to clean scanner glass

1. Unplug the power cord.
2. Clean the outer case with a cloth dampened with a mild detergent and water.
3. If the document table glass gets dirty, clean it with a soft dry cloth. If the glass is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.
4. Ensure that there is no dust on the glass of the document table. Dust can cause white spots in your scanned images.

*** CAUTION: Do not press on the document table glass too hard.

5. Be careful not to scratch or damage the document table glass, and do not use a hard or abrasive brush to clean it. A damaged glass surface can decrease the scanning quality.
6. Never use alcohol, paint thinner or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case.
7. Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently damage the mechanism and circuitry.
8. Do not spray lubricants inside the scanner.
9. Never open the scanner case.

***NOTE: Wipe the inside of the document cover and the scanner's document table before scanning transparencies.

on Feb 15, 2009 | Epson Perfection V200 Flatbed Scanner

1 Answer

While printing, red turned to pink on printed sheets. All cartridges have ink.


Try
Clean the Scanning Area sikaku.gif Cleaning the Platen Glass and Document Cover i_expl.gif Caution
Be sure to turn off the power and disconnect the power cord before cleaning the machine.

i_important.gif Important

bullet_s2.gif The inner side of the Document Cover (white sheet) (C) is easily damaged, so wipe it gently.

bullet_s2.gif If the glass of the ADF (A) is stained with ink, correction fluid, or the like, black streaks may appear on the printed paper when the document is loaded in the ADF. With a clean, soft, lint-free cloth, wipe the glass of the ADF.

With a clean, soft, lint-free cloth, wipe the Platen Glass (D), the inner side of the Document Cover (white sheet) (C), the glass of the ADF (A), and the inner side of the ADF (white area) (B) gently. Make sure not to leave any residue, especially on the Platen Glass.

t_50710ce_mx85095.jpg
sikaku.gif Cleaning the ADF i_expl.gif Caution
Be sure to turn off the power and disconnect the power cord before cleaning the machine.

1. Open the Document Tray.

t_50720ce_mx85096.jpg
2. Open the Feeder Cover.

t_50730ce_mx85097.jpg
3. With a soft, clean, lint-free and dry cloth, wipe off any paper dust from the inside of the Feeder Cover (A).

t_50740ce_mx85098.jpg
4. After wiping, close the Feeder Cover by pushing it until it clicks into place.

5. Close the Document Tray.

6. Reconnect the power cord then turn on the machine.

Oct 27, 2010 | Canon PIXMA MX850 Multifunction Printer

2 Answers

Scanner glass clean


Cleaning the glass is rather simple. Take the 2 screws under the cover out. Now gently lift the top part of the scanner (some force may be needed). Then the scanner is in 2 parts and the glass can be cleaned inside and outside with a wet wipe glass cleaning pad. Dry the glass with a towel and inspect the glass with a lamp, that no cleanser remains are left. Now install the scanner in reverse order.

Jun 21, 2009 | Epson Perfection V100 Flatbed Scanner

1 Answer

I took apart to clean glass - think it is assembled wrong!


that glass( slanted one) is supported on top by the metal plate ( problably 3 inches wide) running across the top of the metal cover(covering the insulation level) the glass inserts inbetween 1 or 2 tabs in the metal support, it then lays on an angle against the metal cover( hoilding the insulation level) and is secured by the 1 in thick angled metal retainer. hope this was helpfull.

Mar 14, 2009 | KitchenAid Architect Series KEBC107KSS...

1 Answer

Can't clean the inside of the glass door--the screen blocks it


Have to replace the door. You probably removed the protective plastic cover inside the unit intended to keep material from passing through the screen into the area where the glass is located. That was my problem. I thought the plastic was shipping material. My Bad! No way to clean the glass from the inside because they "never imagined" someone would remove the plastic cover.

Nov 10, 2008 | GE XL1800 1100 Watts Microwave Oven

1 Answer

How do I clean the INSIDE glass/platen?


You mean the inside of the scanner glass? (The platten is a part of the print unit),

You'll have to remove the sides and read cover. Unplug the scanner wires and remove the scanner assembly. Separate the document feeder from the scanner bed. Open the covers of the scanner bed (usually there are screws holding it together). Remove the glass and clean it. Reverse the process to reassemble.

Be careful. Canon multipasses are built a little like a Chinese puzzle box. There are little snaps everywhere as well as screws. Watch out you don't force anything and cause the snaps to break.

Nov 05, 2008 | Canon PIXMA MP830 All-In-One InkJet...

3 Answers

Cleaning the Flatbed Glass


We cannot clean inside the flatbed scanner glass, it is not a removable part.

Jun 06, 2008 | HP Photosmart C6100 All-In-One Printer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...