Question about Honda CB 200 Motorcycles

Open Question

Dirtmaster 200 pit bike wiring what couler wires do what theres 1xgreen 2xyellow 1xblack/red 1xblue/white

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
docjohn174
  • 943 Answers

SOURCE: Maytag dryer MDE4000AYW change 3 prong to a 4 prong

HI thanks for your question. the red to red black to black white to white green goes to the fram of the dryer. thanks hope i was helpful. please rate my answer.

Posted on Oct 12, 2008

Ad
  • 8 Answers

SOURCE: Wiring issue with the Honeywell HE360A Humidifier

Maybe I can help. this is 24v so it doestn't matter which wire goes where so here goes. 2 wires from humidistat go to furnace, split one of the wires(not both) so they reach the yellow wires on the humidifier. with marettsconnect one of the split wires to one of the yellow wires. do the same to the other split wire and yellow wire. what you should get is one wire from humidistat to furnace then one wire from humidifier to humidistat and one from humidifier to furnace. hope this helps

Posted on Feb 04, 2009

james griff
  • 25 Answers

SOURCE: need to know how to wire up a pit bike from only

it is the same as the other motor on any pit bike the red goes to red and some times the spartplug comes from the motors so you knever know the other three wires are for you light horn and rev counters if you really want to but the pit bikes are made for off orad so you will be spoiling the bike with lights and just remember you need road legal tyres aswell

Posted on Jul 10, 2009

  • 31 Answers

SOURCE: How to wire a tach on 05 heritage softail

Locate & route Black lead to ground / 2004-later softail: On the frame strap under the seat directly in front of the battery.

Locate & route the pink lead to Signal / For 2004 & later FXST/C/I The #3 cavity in the connector {39b} on the back of the speedometer. The socket terminal on the signal (pk) lead fits the #3 cavity.

Locate & route the Orange and white lead to power / Ummm.. it's saying for 2004 and later to adapt to the fuse block For earlier [ For 1996 to 2003 softail: locate the power lead (o/w) in the tail lamp pin connector {7a} under the seat behind the right rear corner of he battery.] "here you are looking to run it to a fused line, not directly to power/battery" I hope this helped.

Posted on Sep 19, 2009

  • 9 Answers

SOURCE: 125cc pit bike no spark need help at witts end.

remove the alternater cover and check all the wires are intact behind there

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tring to wire up sadelta hand mic the mb-4 to the superstar 3900 but dont know the wiring there are 5 wires the couler of the wires are screen white red green andbrown can you help


I would like to state there are two ways to do this, one way is too open the radio cover up and look at the back of the jack where the mic goes and the color of the wires should be the same, or you can do it the second way which is a little longer and patience to do take the wires of the mic and touch one at a time to a prong one should get you sound when its right the other should transmit when you push the handle to talk on the mic

Jun 02, 2014 | Superstar 3900

1 Answer

No Spark, No Power coming from CDI to coil


Check the wiring on the connector plugs make sure all the wires are the same color on both sides, red to red blue to blue and so on. I had the same problem After replacing a stator and just plugging it in,after two weeks a new cdi and coil i noticed there were two wires transposed.

Aug 22, 2012 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

Which cables do i use for stanton str 8 30 the cables are red white with a grounded pit on them


HI, use both of them. The white one is the left channel and the red one is the right channel. The 3rd wire is a grounding wire. Cheers John. Styluscity.com

Sep 26, 2011 | Stanton STR8-30 Turntable

1 Answer

What couler wire does what .the plugs have been cut off.cant tell which is live or earth ,


red is iginition, yellow is batt (or constant), blk is ground, blue is remote for amp or antenna, white, green, purple, and grey are your speaker wires

Sep 17, 2010 | Kenwood KRC-379R Cassette Player

2 Answers

My pit bike 125cc wont fire up


Try unpluging the cutouts.they are usally on 2-3 places on these bikes ,brakes,also check the fuse that is on the red wire comming off the battery it will be blown or end of fuse holder will be pushed in and not touching the fuse.

Apr 13, 2010 | RTO Pit Bikes

1 Answer

Two years ago my Voltage Regulator went bad and over-charged my new battery to the point that it swelled up. The Yamaha dealership replaced both the battery and Voltage Regulator. Two years, almost to the...


If you're going through regulators that often I would suggest going after the stator. Make sure it's not grounding out on the chassis. Find the 3 yellow or white wires that are connected to the regulator. using a meter in OHMS ( looks like the horseshoe ) with the bike off check wire one (red ) to wire 2 ( black ) then wire one ( red ) to 3 (black ), then 2 (red ) to 1 ( black ) and 2 ( red ) to 3 ( black ) , then pick one ( red ) and black to the chassis, motor, ground. somewhere metal on the bike. The first series of tests you should get some sort of numbers, ( which should be somewhat close in numbers ) When you go to ground, Chassis you should get no numbers, OFL, OL, or the horseshoe sign if you get numbers there, the stator is bad and your transmitting ac voltage to the chassis.

Aug 27, 2009 | 2000 Yamaha V Star 1100 Classic

3 Answers

125cc pit bike no spark need help at witts end.


remove the alternater cover and check all the wires are intact behind there

Apr 04, 2009 | RTO Pit Bikes

1 Answer

Need to know how to wire up a pit bike from only wires off the motor to 5 wires , i have swaped motors an the new motor has 5 wires comin from it the old motor had only 2 so im not sure how to wire it up...


it is the same as the other motor on any pit bike the red goes to red and some times the spartplug comes from the motors so you knever know the other three wires are for you light horn and rev counters if you really want to but the pit bikes are made for off orad so you will be spoiling the bike with lights and just remember you need road legal tyres aswell

Mar 28, 2009 | RTO Pit Bikes

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...