Question about Honda CR 250 R Motorcycles

1 Answer

Kick starts slipping it not engaging,can you help me please,with advice and cost.thanks

Posted by on

  • pe13 Apr 04, 2011

    hi thanks for your help.i will take the casing off and get back to you, thanks again

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 3,433 Answers

Is the lever sli[[omg on the shaft ? OR the shaft in the case is not holding?
The lever can feel tight yet be loose when kicking. Remove the lever and check the knurling on the shaft. If the clamp bolt is not kept tight, the lever will slip and destroy the shaft knurling as well as the lever and they won't grip each other. If you replace the lever, you will need a new shaft also.
Good Luck, -Ned-

Posted on Apr 03, 2011

  • pe13 Apr 04, 2011

    hi co7196.it slips when i try to kick it over,sometime it grabs an sometimes it just drops to the ground.thanks

  • Ned C Cook
    Ned C Cook Apr 04, 2011

    Internally ,Inside the case, There is a return spring that resets the lever when it goes up. You willl need to take the side cover off and check the mechanism. Remember to chk the shaft and lever splines as you remove the cover. Once opened, the problem should be easy to spot. Will be here, so if you want, take a picture of what you have and send it to me. Till then, Ned.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 fxst 1340 kick start wont engage


Hi Anonymous, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Apr 08, 2013 | Harley Davidson Motorcycles

1 Answer

I have recently bought a '72 CB350 twin. Everthing worked but now the kickstarter won't. The kickstarter will go all the way down and return, there is no combustion sound. It will turn the wheel...


possible problem as this is a common thing on the CB360's. What happens is the kick leg tends to slip out of sync with the engaging gear, it will be under the right side cover. Some times you need to remove the cover and manually put it back in to sync.

Otherwise you have stripped your kick starter gear.

Aug 09, 2011 | 1972 Honda CB 350 F0

1 Answer

1995 JEEP WRANGLER Automatic 4 cyl. gears starting to slip


ck the condition of the tranny fluid. If the fluid is very dark, it will need changing. Another problem with the jeep auto tranny is that if the fluid has not been changed in a long time, the clutch material will wear and clog the tranny filter inside the pan.If there is alot of clutch material in the pan and you change the fluid and filter, sometimes the tranny won't work because the clutches are worn out too much.

Sep 16, 2009 | 1995 Jeep Wrangler

1 Answer

Feels like gears are slipping with any kind of power


If you are hearing a bad grinding noise then Stop riding the bike NOW. If you continue to ride, or run the engine, you will only do more internal damage and make the repair cost higher. Chances are you have a bent shift fork and the noise is the engaging dogs on the slider gear grinding the side of a fixed gear because the bent fork is preventing full engagement.

The entire engine comes out of the frame and gets completely torn down. The top end comes off, the case covers come off, the clutch, shift shaft, kick starter, flywheel and electrics all come off. Then the case is split to gain access to the gears and shift drum. The gears and shift drum now get removed and now the fork can be replaced. If a gear needs to be replaced because of a broken teeth, replace also any gear the teeth mesh with. A few special tools are needed. Sorry for having to give you the bad news.

A “very helpful” rating for this answer? Thanks!

Jun 14, 2009 | 2000 Yamaha YZF-R6

1 Answer

Stuck in 4wheel drive??? help :)


when driving in 4wd engagement there is a problem in that the torque in the axles and drive lines is not dissipated on hard surfaces as the wheels cannot slip ( great for snow ice mud gravel and the like but a no-no on hard non slip surfaces
yes reversing it will relieve it but if on hard surface ,winds it up again in reverse
better to simply drive two wheels onto the grass verge of the hard surface and then kick it into 2wd
if the diffs are limited slip diffs then the antislip action in the diffs will be pressed very hard together and will produce problems on turning corners
you may have success if you get all 4 wheels of the ground on a hoist and let the wheels spin and then try to engage 2wd

Mar 25, 2017 | 2006 Hummer H3

1 Answer

Gears slip


the transmission is fine its the springs in the preasure plate that have shrunk and the clutch needs to be replaced.
I hope this advice helps.
can u rate the advice please

Feb 26, 2009 | 1996 Ford Mustang

1 Answer

2002 Ford Explorer 4-WD not engaging ???


you might have just had a bad connection
could you pleas rate my solution thanks
later paul

Nov 11, 2008 | 2002 Ford Explorer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...