Question about kawasaki KLX 300 Motorcycles

1 Answer

How do I change break fluid in an 05 Kawasaki 300klx?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

The easiest way i find is to drain the resevoir, refil and drain with a vaccuum bleeder until clean fluid comes through the bleeder (topping up the resevoir as you do so)
this works for front or rear brakes.
hope this helps

Posted on Apr 01, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Leaking brake fluid

Sounds like the seals for the disc caliper pistons are shot, and need replacing.

HOWEVER, you didn't say if it was the Front or Rear brake!

So, rear brake:

Front brake:

Items Items # 43049 & 43049A for both.

Shop it around on Ebay

Apr 04, 2014 | kawasaki VN 1500 Vulcan Classic...

1 Answer

Engine cut out when accelerating

check your fluids maybe it over heated new engines tend to have bits of metal still in the block that breaks loose and is taken out via oild and fluid changes nescesary in the first few months of breaking in the engine. change the oil and see if that helps could it have been test drove alot?

Apr 21, 2013 | kawasaki Motorcycles

1 Answer

How to burp my 05 kawasaki zx6r

water pump may be failn--not movung fast enough--radiator or other channels cud have a block--get a professional repair manual online

Jun 10, 2012 | kawasaki XRX 125 Fundoro Motorcycles

1 Answer

I am leaving my kawasaki balius for 2yrs w/out running,because i have to work abroad.I need a suggestions on how to preserve the engine in good shape,and to escape from overhaulin the engine.Highlly...

If you can leave it in dry storage, remove the battery and put it on trickle charge or better still get someone to trickle charge it once a week for you for a few hours or until it is charged and reads 13.6Volts.
The rest will wait.
When you return, change all the fluids before trying to start it, including break and clutch fluids!
The battery should survive and that will be that. A bit of a polish, check your tyres and off you go.

Mar 12, 2011 | 1997 kawasaki Balius - II

1 Answer

My 2003 kawasaki zxj6 has been sitting for almost 3 years in a storage shed.. What fluids should I change on the bike

I would change all of them including the break/clutch fluid and take the plugs out and pour some thin oil down the cylinders to ease the rings before turning her over.

Feb 20, 2011 | 2003 kawasaki ZX-6R

1 Answer

I changed the front pads on my 05 trailblazer i did not have a c clamp so i took the break line off the caliper now when i tried to bleed the breaks with the bolt on the break line i only get a stiff pedal...

Have you checked your Master Cylinder to ensure that it's full of fluid? If it is empty the best way to bleed the brakes in that case would be to add fluid and then break the caliper bleeders loose and let gravity do its thing. Gravity bleeding is the best way to make sure you don't trap air in the brake system. Make sure you keep the master cylinder full of fluid while gravity bleeding. Run approx 2 reservoirs full to make sure that you have no more air in the line! And you should be done.
Also, the vehicle does not need to be running to gravity bleed.
Good luck!

Feb 06, 2011 | 2005 Chevrolet TrailBlazer

1 Answer

Fluid changeing.

hello should be small cover on gear shift side of case with 3-4 screws in it , oil filter is behind cover, not many fluids to change on this bike unless it is automatic, also there is big screw in bottom of motor to drain oil.

Mar 31, 2010 | 1996 kawasaki VN 800 Vulcan Classic

1 Answer

Just changed rear brake pads on 05 mazda 6. now

This is normal and you need to keep pumping the brakes till they reset there self. Once the brake peddle have reset there self and is firm, check the brake fluid level again and add brake fluid if low. After brakes have reset there self, go for a test drive around the block and check the parking brakes. Good luck.

Nov 17, 2009 | 2004 Mazda 6

1 Answer

Process of changing the rear brake pad on the Kawasaki vulcan 900 classic ---could not find the 900 on the drop down menus

Remove the 2 break bolts that hold the break to the bracket. Remove the pin covers on the side. <2 flat heads> Remove the Alan key pins and old pads will come out. Use a c clamp and a rag to compress the caliper piston. replace break pads pins and pin covers. Re bolt the break to the bracket. pump breaks till stiff. open bleeder. pump twice and close during pump. clean up and enjoy ;D

Jul 07, 2009 | 2005 kawasaki VN 800 Vulcan Classic

4 Answers

Changing the 2 inner sparkplugs

spray the base of the plug with a good dewatering fluid or nut loosner

wait 30 minutes then apply the plug spanner and use a tea towel or cloth to make the leverage easier and turn anti clockwise

hope this helps

Dec 30, 2008 | 2005 kawasaki Z 1000

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides