Question about Suzuki VZ 800 Marauder Motorcycles

1 Answer

Im trying to replace the wheel bearing on the front wheel suzuki vz800 2000 trying to get them out

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Push the spacer between the bearings off to one side. Get a chisel or an old screw driver and tap the inner race of the bearing out from the opposite side. Save the spacer. Flip the wheel over and tap out the other side. Grind the outer edge off one of the old bearings and place it over the new bearing. Tap on the old bearing to drive the new bearing into place. You may have to finish the install with a chisel on the outer race. Alternate tapping from side to side being careful not to damage seal. Flip the wheel over put the spacer back into the wheel and tap the new bearing into place so that it barely touches the spacer. The bearings should spin freely, but should not bind (inner races pushing too hard against spacer will cause binding). If you install too tightly reach through the wheel and tap on the opposite bearing only enough to stop the binding. Press in the seals and reinstall the wheel on the bike.

Posted on Apr 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2002 suzuki SV650S when replacing my front wheel i could not centre it to replace the brake caliper. could you tell me why the spacer was sticking out by 15mm .


Hi, Ronald for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
VFR F3 front wheel how to
https://www.youtube.com/watch?v=saG2n1jQViw
Suzuki SV650 Service Manual
OEM parts for Suzuki
Suzuki SV650 Owner Manual

Jan 13, 2017 | Suzuki Motorcycles

1 Answer

Replace front hub assembly 2002 Suzuki XL7


the front wheel bearing hub?
XL-7 (the dash matters)
my wild guess, is the questions was
what are all steps to do this job. and tools.
that?
RTM?

https://suzukipitstopplus.com/Products/10056-2002-grand-vitara-xl-7-service-manual.aspx

http://www.fixkick.com/hubs/FW_BEARINGS.html#newer
the link shows all years, and variances.

here is a photo review, that is accurate up to
1998, and beyond , if you skip the bearing service parts. as yours are INTEGRATED
and NON-serviceable.
http://www.fixkick.com/hubs/FW_BEARINGS.html


the photo 6a and B
shows removing the hub,
so do that , buy a new hub and put it back
the same way, using the tool stated
at the stated ranges of torque
123-180 ft/lbs.
this range allows you to get the screws into the locking rings.

Dec 11, 2016 | 2002 Suzuki XL-7

1 Answer

How to replace front wheel bearing?


old post, but you are first to say front. many others fail to say end of car.

is your car 4wd, as 2wd is different rules. so...??????

I toss coin land on 4WD.

2000 front wheel bearing

got it.

the 2000 year, is important.

this year is the last year, before non untized hubs.

http://www.fixkick.com/hubs/FW_BEARINGS.html#newer



my posts is for stock cars. only, and USA spec, cars.

other countries, evolve this in different years.



2000 (never 2001+)

fsm quotes



  1. Before servicing the vehicle, refer to the Precautions section.


  2. Remove or disconnect the following:



    • Front wheel


    • Brake caliper and rotor


    • Locking hub or hub drive flange, if equipped,(it is)


    • Hub grease cap, if equipped


    • Wheel speed sensor, if equipped (ABS)


    • Wheel bearing lockwasher


    • Wheel bearing locknut (ring) and inner washer


    • Wheel hub and bearing assembly (slide hammer?)


    • Wheel hub oil seal


    • Wheel bearing oil seal


    • Snapring




  3. Press the wheel bearing and race out of the hub.


reverse is same but the lock ring must be set

to 123-180PSI. stop tightening above 123 at first alignment hole in lock ring..

Jun 26, 2014 | 2000 Suzuki Grand Vitara

1 Answer

How to replace front wheel bearing


pull wheel remove grease cap undo carter key remove nut pull off rest of hub take bearings frt and rear out of hub clean old grease from bearings check bearing for defect install in revers order remender to install new grease in new bearings lots of grease and u will need new seals for same front and rear

Jun 14, 2014 | 2006 Suzuki Verona

1 Answer

1992 4x4 front wheel bearing adjustment


To follow the "specs" you need a special socket with four pins (google should find a picture) to torque the bearing nut. These are crush bearings and are designed to be tighter than the older style bearings.
The bearing nut is under the locking hub, behind the locking washer that is fastened down with four screws.

Mar 27, 2012 | Suzuki Vitara Cars & Trucks

2 Answers

Replace front wheel bearings. The right front brake disc has a very slight wobble in it. My mechanic suggested replacing the front wheel bearings. How do I do it?


Its pretty simple.
1. take off wheel
2. take off brake caliper, caliper bracket, and rotor.
3. remove axle nut which secures axle into the bearing
4. should be 3 bolts on the flange which hold the whole wheel bearing/hub unit on.
5. reverse for reassembly

The wheel hub and bearing are all one assembly and are bout as a unit.

Sep 15, 2009 | 2002 Suzuki XL-7

1 Answer

Where is a carrier bearing located on a 1999 suzuki swift car


hi ruby ?? now we have a good idea as to what is the problem thanks to your description on noise ! this sounds very much from what you describe that it is front wheel bearing on its way out /worne the bearing fits inside the hub assy either offside front or nearside front the actual driveshafts run inside these bearings cv joints as they are known not uncommon fault on many front wheel drive cars however it depends on which side you suspect the noise/droning is coming from?? you can try listening with a passenger to pin point ? or you could jack each front wheel in turn and rotate wheel also try rocking/tilt wheel top and bottom to feel for any undue movement ? there should be none if ok this is not an expensive job to repair howeveri would suggest you shop round motor supermarts or shops for price of new bearing 1st not dealerships! if you have haynes manual it will describe the proceedure for doing this job normally 1 hr to change a little longer if you have a friend ?? who could do it for you saving££££s in garage costs ?labour charges are costly try this ? whilst driving on a quiet road if you move steering right and left you may find droning sound more on one side? or may disappear either on right steer or left? this may help in verifying rogue/worne bearing to you ?? for your info i know that cost of one of thee bearings on a cleo 94 year cost £18 very similar to size on yours ? hope this helps ? ps whilstyou are checking wheels as above ? yu might as whel check the b/pads wear/thickness just in case you may need to replace them too whilst doing bearings for peace of mind for future and mot ? not aware of your location so as to offer places/stores/motor factors to try /price up parts ? obviously trade is less so wish you luck and hope all above is lear enough for you to understand come back if you req more info/assistance ?

Sep 07, 2009 | 1999 Suzuki Swift

1 Answer

Noise from the right front wheel during a left turn. Parts replaced: Wheel bearing, brakes, plate behind the rotor. What could this noise be?


try swapping rotors , from one side to another i have had that cure problem ,if noise moves replace rotor

Jul 15, 2009 | 2005 Suzuki Aerio

1 Answer

Replacing right front wheel bearings 2003 Suzuki Aero SX


You can probably rent or borrow a bearing puller from a large parts store.

Nov 17, 2008 | 1996 Suzuki Swift

2 Answers

Replacing wheel bearings on suzuki swift


Front or rear?? Big diff! Frankster016

Oct 26, 2008 | 1996 Suzuki Swift

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...