Question about 2010 Yamaha XT250
I broke my key in the ignition of my xt250 and cant afford to get a new one right now so could u tell me how to bypass the key. i have unpluged it so the bike starts but the lights dont work
Hi, Woohooimsocr for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to hotwire motorcycle
Yamaha XT250X Service Manual
OEM parts for Yamaha
Yamaha XT250 Owner Manual
Posted on May 23, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: bike will not start no power
Touch a 12" piece of wire to one terminal then touch the other end of the wire to the other terminal. Got a really good spark? No spark = bad battery. Okay, so you do get a good spark. Check the wiring harness for an unplugged wire. Also check for loose connections and burned wires. Bad ignition switch? Kill switch turned on?
Posted on Mar 13, 2009
SOURCE: Suzuki GS 750 Starting
Sounds like someone has customised your bike - does it have a RH switchgear?
there shd be 3 connectors for the RH switch in headlamp - a 3 pin & 2 singles, the 3 pin has 2x orange/white + 1x yellow/green, this connects to 1x orange 1x orange/white +1x yellow/green wire which are for the kill + start
The singles are 1x orange/green + 1x white (loom side) which go to 1x orange + 1x white respectively, these are for the brake light
If you are keeping the kill sw then its only the yellow/green wire that can be discarded.You can also follow it back to the starter disconnect sw - junk that - keep tracing it back to the starter solenoid & junk that too. If you want to keep the electrical accessory output terminal then connect that straight to the battery or to the orange wire from the ign sw to the fuse box. You can also junk the thick wires from the solenoid, 1x to batt + 1x to the starter motor
You can junk the starter motor too ( 2 bolts then pull away from sidecase & up at the rear) but make sure you block the hole up!
If you want to bypass the ign sw then disconnect the 4 block from it & jump the red to the orange & also the brown to grey (for lights etc)
Good luck & ride safe
Posted on Jun 27, 2009
try a new spark plug or check the Electricals on the bike from the battery to the engine i dont know how to but i would check them
Posted on Sep 07, 2009
Tips for a great answer:
Nov 07, 2016 | 2015 Yamaha XT 250
May 25, 2015 | 2010 Yamaha XT250
Mar 15, 2015 | 2008 Yamaha XT250
Jun 21, 2014 | 2010 Yamaha XT250
Oct 24, 2013 | 2014 Yamaha XT 250
Oct 15, 2013 | 2009 Yamaha XT250
Sep 23, 2013 | 2008 Yamaha XT250
Dec 01, 2012 | Yamaha Royal Star Venture Motorcycles
Mar 15, 2012 | 2010 Yamaha XT250
Mar 07, 2012 | 2010 Yamaha XT250
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: