Question about Yamaha XT 660 R Motorcycles

1 Answer

Raptor660 turns but wont crank it was doing that when i first got it a buddy of mine was tapping the startor it fired up next morning he said it fired strate up no choke rode 4 a while relay burnt out found bad wires under the battery cleaned n taped got new relay now its just turning again

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

You have a bad starter one way clutch inside the motor. You fixed the external problem now you have to fix the internal one. If the starter motor is turning but the motor is not, then the one way clutch is slipping on the large starter gear next to the flywheel. You will have to replace both the one-way clutch attached to the flywheel and the large starter gear that fits into it to fix the problem. The contact surface on the gear has become rough or chattered and is no longer smooth , so the clutch will not grab it hard enough to turn the motor over and start it.

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Jeep Grand Cherokee Limited 2001. I get power from battery my radio comes on for example but it will not crank up


possibly startor or nutral safty swich key in start position chek if you have power to the startor small wire if you do it's the startor

May 03, 2014 | Cars & Trucks

1 Answer

Motor wont start


do you hear the fuel pump working? and did you check the fuses? also check and see if the fuel cut of switch is on. it was typically located in the trunk by the hinges that hold th trunk or on the side but look in your owners manuel or google it. i would guess fuel pump in honesty.

Apr 14, 2014 | 2000 Ford Taurus

1 Answer

Car wont start


Just curious, it won't start doing what? Mine didn't start this morning either until I put the key in the ignition switch and turned it. Could you please be a little more specific, ie, no lights no power, crank but no start, power but no crank,

Oct 04, 2013 | 2001 Chevrolet Impala

1 Answer

Ranger hard starting cold 2006


sounds like lack of compression

Jun 07, 2013 | Polaris 2006 Ranger 4x4 EFI

1 Answer

I got a 1996 jeep grand cherokee laredo wont fire got new crank senser new pick up coil in distributor and new spark coil still wont fire what is the problem


Their is a computer chip behind the antifreeze bottle check the second wire harness play with that while someone turns the key it happend to mine the same thing and started right up

Aug 14, 2012 | 1996 Jeep Grand Cherokee

1 Answer

Just bought a 98 intrigue and drove it this morning, it has been starting fine and shut it off and now wont start, just a clicking sound but don't think its the battery. any ideas on what to check


Hi to me if the clicking noise is coming from the engine then this points towards the startor motor packing up one thing you can try to get it started is give the starter motor a few hard hits with a hammer doing this sometimes shock the selenoid into working again but dont rely on this lasting long term as it could leave you stuck

the best option is to get the starter replaced as soon as you can

to locate the starter follow the live red lead from the battery this goes to the selenoid on the starter and the big round thing next to the small round part is the startor motor give the bigger part a few taps with a hammer doing this should get it started

let me know if you have any problems

Aug 15, 2010 | 1998 Oldsmobile Intrigue

1 Answer

Not starting 1975 dodge D100


check the igintion switch your bypassing it when you jump it so have it checked

May 20, 2010 | 1978 Dodge Magnum

3 Answers

Peugeot partner wont start first thing once


i presume its a diesel

i reckon its the glow plugs get them checked i am sure a new set will cure your problem

Nov 05, 2009 | 2006 Peugeot 604

2 Answers

Yamaha FZR600 1991 - Spark plugs fire but bike doesn't start


no, i leave mine on all the time! unless you have a sticking float ...that might let fuel creep into the cylinder over night and cause flooding...turn kill switch off, choke closed, throttle open full max, then crank for ten seconds then let set for about a minute to let starter cool down then see if it starts. if that doesn't work then try to push start it..if that doesnt work then take it back to the repair shop.

Oct 08, 2009 | 1991 Yamaha FZR 600

1 Answer

My 1995 chevy corsica ran fine one day and the next morning wouldnt start. It trys to turn over but wont start. Spark plugs and coil packs are fine. Fuel filter is fine. What could cause this?


Try tapping on your PCM behind your glove box,also are you getting fuel pressure and a good blue spark at the plugs when cranking the engine?

Sep 26, 2009 | 1995 Chevrolet Corsica

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...