Trying to fit an evotech tail tidy to my 2009 YZF R125 but the evotech instructions aren't exactly helpful so can anybody tell me if there is a how to guide out there for it? I have googled everything I can think of but found nothing and I really want to get rid of the ugly plastic at the back of the bike. Any assistance anybody can give would be greatly appreciated?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Anonymous tail light issues are relatively easy to diagnose and repair always check the tail light fuse first and make sure you have power on both sides of the fuse holder and the usual suspects are:
1. Tail light bulb element is broken.
2. Tail light bulb soldered contacts are extremely worn down.
3. Tail light bulb socket corroded.
4. Tail light bulb socket has no power and or ground.
5. Tail light wiring harness damaged from the rear tire.
6. Tail light rear fender wiring harness connector faulty due to corroded, broken, or loose pins/sockets.
Before diagnosing any brake light issue always check the bulb and fuse first for integrity a brake light staying on is usually caused by the front brake light switch, which is mechanical, not disengaging. On early models moving the throttle control housing closer to the front brake master cylinder is the main fix. On late models, the switch gets tweaked and needs to be realigned. A brake light that does not come on when the brake lever is applied can be caused by a faulty switch or no continuity in the wiring at the switch. The rear brake light switch is hydraulic and it is extremely rare to malfunction in a closed circuit condition causing the brake light to stay on. Usually, rear brake light switch issues are caused by no brake pedal free play or a sticky rear master cylinder piston. A brake light that does not come on when the rear brake pedal is depressed can be caused by a faulty switch, air contamination in the brake line, or no continuity in the wiring at the switch. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day. How To Access The Tail brake Light Bulb Yamaha YZF R125 dashboard indicators rear light not working how to fix it Yamaha YZF R125 Service Manual OEM parts for Yamaha Yamaha YZF R125 Owner Manual
Yamaha R125 might be launched by 2008 end.It will showcase some of the most advanced tech in probiking like the deltabox frame,Fuel injection,monoshocks,hemi combustion chamber forged pistons that can resist high temperature and a lot more.