Question about Suzuki TS 185 Motorcycles

1 Answer

Kida was on lt50 quad yesterday and all of a sudden it started making like a scrapeing and grinding noise from behinde flywheel so switched it off and when i push it it like jams then frees off then jams

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Sounds like you need to remove the flywheel and see what is going on inside it. Chances are a charging coil has come loose and is binding up on the flywheel.

Posted on Mar 28, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Ceiling fan makes noise, rubbing noise?

Ceiling Fans making a Grinding Sound. If it's a grinding your hearing, most likely the ball bearings in the motor are bad. Some ceiling fans have flywheels that attach the blades to the motor. If the flywheel is sagging or has broken, the blade irons might be scraping on the top of the switch cup housing.

Feb 09, 2018 | Dryers

1 Answer

I turn the key and it makes a loud scraping/grinding noise and dosnt crank or start vr commmodore v6 auto

Starter bolts are loose, or starter components may need servicing; probably bendix drive plunger / starter solenoid stuck, out of alignment or damaged.

Check the starter first, then flywheel, and while u are under there, inspect the crankshaft and drivetrain for signs of damage or otherwise
And most importantly--work safe

Jan 02, 2017 | Cars & Trucks

1 Answer

I have a DeWalt miter saw. It has begun making a loud scraping noise when I release the handle. Any idea what this might be?

It could be a bearing starting to fail. Take the blade off to make sure there is nothing stuck behind it and then see if it is still making the grinding noise. Could also be a bent guard catching on the blade.

Jun 24, 2012 | Saws

1 Answer


You have a grinding noise when it's running or when you try to start it?
There is an inspection cover just behind the oil pan of the engine. If you remove it you can see the teeth on the flywheel. Chances are that the flywheel may still be good and the starter drive (part of starter) may be failing. If so and you leave it that way it will damage the flywheel. On automatic cars it's called a flex plate. And yes if you have a chrysler trans on there the converter may have the ring gear welded on.

Apr 26, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Reverse is out (major grinding, and quad doesn't

It is a pretty big job for a weekend mechanic. You will need some special tools > Impact driver, torque wrench, expanding 'C' ring pliers, case splitter and flywheel puller. The entire engine, top end and bottom end must be torn down. Don't try it without the manual. The clicking noise is probably a broken tooth on a gear. ALWAYS replace gears in sets, ALWAYS. The grinding is most likely a bad bearing.

Oct 19, 2009 | 2001 Yamaha XTZ 660

2 Answers

Lens makes grinding noise

yes dust in mechanism or broken gear but ti not easy

Oct 12, 2009 | Panasonic Lumix DMC-FZ5 Digital Camera

1 Answer

I have a 2004 F-150 5.4 and I need to know if the flywheel is messed up or if it's something else. It's making a loud scraping/grinding noise around the flywheel, more so when I accelerate.

Take off Trans Dust cover and inspect, See if there is any damage to the Trans dust cover? See if starter has to be shimmed? See if the starter is sticking in the fly wheel, which will grind like crazy, if it does stick.?

Sep 09, 2009 | 2004 Ford F150

1 Answer

Car makes grinding noise when I try to start,

You may need to install what they call shims in between the starter and the flywheel in order to align it correctly with the flywheel

Mar 03, 2009 | 1992 Mitsubishi Eclipse

1 Answer

Problem with ignition switch, starter, flywheel

that sounds correct what happens is the starter still tries to engage the flywheel and grinds the teeth off both. Replace switch then worry about starter flywheel if it starts fine don't worry about it you may have saved it if you didn't let it run that way long

Dec 24, 2008 | 1999 Saab 9-5

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

79851 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4898 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides