Question about 2002 Aprilia RS 125

1 Answer

What size socket do i use to remove nut on back wheel.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Aprilia Master
  • 40,839 Answers

Hi, Vespa_steve try measuring it flat to flat and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.

Posted on Oct 28, 2015

  • Gregg Mahin
    Gregg Mahin Oct 28, 2015

    Hi, Vespa_steve try measuring it flat to flat and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.

    DOWNLOAD 2002 Aprilia Rs 125

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost wheel socket, so cant remove wheels, special stud in each wheel


If they are Factory Wheels Dealer should get you a key Socket. If they are After Market Wheels then depending on the exterior shape and size of the special Lug nut get a LUG NUT REMOVER SOCKET SET from a Auto part Store. Since you will have to use a Impact wrench best will be to go to a Professional Tire and Rim Installer and they usually have all kinds of Lug nut remover sockets.
Send me a clear picture and diameter of the lug nut to suggest further solutions.

Mar 15, 2015 | Cars & Trucks

1 Answer

How do I rgerplabe how do I replace a front wheel bearing?


TO REMOVE FRONT WHEEL BEARING.YOU NEED TO SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.MAKE SURE SITTING ON LEVEL SOLID GROUND.BEFORE RAISING VECHICLE OFF GROUND YOU NEED TO LOOSEN HALF SHAFT AXLE NUT JUST A LITTLE BECAUSE WHEEL IN THE AIR HARD TO LOOSEN AXLE NUT WHEN YOU HAVE HOLD THE WHEEL WHILE LOOSEN THE AXLE NUT WHICH IS TORQUE ON ABOUT 200 FT LBS.USING A SIX POINT AXLE SOCKET SOCKET SIZE COULD BE 34 OR 35 METRIC 1/2 INCH SOCKET.YOU NEED 1/2 INCH BREAKER BAR.ONCE YOU LOOSEN AXLE NUT A LITTLE THEN RAISE VECHICLE THEN REMOVE WHEEL.THEN FINISHING REMOVING AXLE NUT AND WASHER.THEN REMOVE THE CALIPER FROM THE STEERING KNUCKLE AND SUPPORT IT ASIDE USING A PIECE OF WIRE.REMOVE BRAKE ROTOR.THEN REMOVE THE 3 HUB BEARING ASSEMBLY BOLTS. USE A SWIVEL SOCKET GOING TO BE HARD TO REACH SPOT WITH A REGULAR SOCKET. REMOVE THE HALF SHAFT FROM THE HUB BEARING ASSEMBLY.REMOVE HUB AND BEARING ASSEMBLY. PUT EVERY THING BACK VISA VERSA. TORQUE HUB BEARING BOLTS TO 70 FT LBS. TORQUE AXLE NUT 284 FT LBS IF YOUR CAR IS 1998 MODEL AND TORQUE AXLE NUT 100 FT LBS FOR THE 1999 TO 2001 MODELS.THE WHEEL HAS TO BE ON THE GROUND JUST ENOUGH TO KEEP IT FROM TURNING.DONT LET ALL THE CAR WEIGHT DOWN UNTIL YOU HAVE TORQUE WHEEL TO THE RIGHT TORQUE.LET ME KNOW IF YOU HAVE ANY PROBLEMS.

Mar 21, 2011 | 1999 Oldsmobile Alero

1 Answer

How to replace rear wheel bearing/hub 2006 scion tc


loosen wheel lug nuts, jack up rear of car and put jack stands under supporting it, remove lug nuts, remove wheels, on back of wheel bearings is a sensor, a 10 mm socket will remove to be careful not to damage this, now on wheel, you will have to remove the caliper and support a 17 mm socket should do this and a breaker bar, once caliper and brake assembly is out the way, you need to remove the holders on the rotor, a pair of needle nose pliers will do it, now you can remove the rotor, once this is done, behind the backing plate, are 4 bolts, not sure of size ,these need to be removed to let the wheel bearing assembly to come out, you will need to tap on the wheel bearing, to loosen it , reverse the procedure to install

Feb 02, 2011 | Scion TC Cars & Trucks

1 Answer

What wrench is needed to remove the 2002 GTI lug nuts?


they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

May 29, 2010 | 2002 Volkswagen GTI

1 Answer

Wheel nut remover. what does it look like


If you are refering to a Standard Tool to REMOVE the NUTS that Hold the Wheel On it is Simply a 3/4 Inch or a 19 Millimeter Socket that you would Find in Any 1/2 DRIVE SOCKET SEt that Has BOTH METRIC and STANDARD TYPE SIZE INCRAMENTED Sockets.
Now the One that Would Come With the VEHICLE Can be of a FEW DIFFERENT Configurations such as A Standard & MOST COMMON TIRE IRON Witch Looks Like A Disfigured "L" Shape One end with a NUT Receaver Socket on one end and A Large FLATHEAD Screwdriver, . The Next Most Common one Would have the SHORT END that PIVOTS. And Basiclt these are the ONLY 2 Types that You Would Find in your tunk Compartment. This Should Answer your Question.
MY RECOMENDATION is >> AT YOUR LOCAL AUTO PARTS STORE YOU CAN PURCHASE WHAT IS CALLED 1 A "STAR" LUG NUT REMOVER , OR MORE COMMONLY REFERED TO AS A 4 WAY. THIS TOOL looks LIKE A STRAIGHT NORTH SOUTH EAST WEST CROSS BAR WITH DIFFERENT SIZE LUG SOCKET ON EACH END, This Tool Gives Much Better CONTROL and LEVERAGE for Loosening and Tightening the Wheel Nuts.

May 12, 2010 | 2001 Ford Focus

1 Answer

How do I remove and replace the front axle?


you first need to remove the big nut that is holding the wheel on the side that you are trying to replace first you must buy the right sized socket thet will fit the nut the while the vehicle is still on the ground take the hub cap off and the cater pin out and then put the socket on the nut using a halt inch tourge ratchet loosen and remove the nut then jack your vehicle up and remove the wheel and the bolts that are holdung the hub and then with a pickle fork that is the tool used for removing tie rod ends that is connected to your stirring and then after that remove your axle and then reverse the procces to put ti back together.

Sep 10, 2009 | 2000 Suzuki Grand Vitara

1 Answer

Wheel nuts on back wheel of 06 ford focus stripped.


Hi Ray,

I put in some time at an auto salvage yard. Aluminum wheels were big sellers and not something we wanted to damage.

When the lug nuts needed some persuading, we got out the high impact 12 pt deep sockets.

First try we used the correct size.

If they were stripped, one size smaller. We hammer them on to the lug and use a breaker bar with a pipe extension.

The only real problems we had were getting the lug nuts out of the sockets.

Good luck and best regards,
Mike

Aug 17, 2009 | 2006 Ford Focus

Not finding what you are looking for?
2002 Aprilia RS 125 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Fabrice Wolters

Level 2 Expert

186 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...