Question about 2000 Husqvarna WR 360

2 Answers

I have a 2000 Husqvarna 360 wr and decided to order an extra throttle cable. The cable I received is too short. The housing is the correct length, but the wire cable itself is 1/2 in. too short. The throttle adjustments are already fully in on the carb top and throttle housing. The part number matches up (PART # 8000 92308). The dealership just left it as "Husqvarna probably changed something that they are not aware of". Any help would be appreciated. Steve Cruse - Topeka, KS

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Steve, The dealership has the responsibility to provide the correct part in return for the money you paid them. Return the unusable part and request the dealer to research what is needed in order to get the correct part. For your part, you don't care that the dealer was unaware of a change. As a dealer representing the manufacturer, they should be aware of changes. In reality, the wrong part was ordered or was picked off the shelf incorrectly at the warehouse. The worst case is you get your money back and check out a different dealer.

Posted on Mar 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Husqvarna Master
  • 500 Answers

I have had to cut down the sheath be carefully not to cut the cable .. just like bending & cutting greenfield..

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 husky 360 100 year anaverary model and someone has welded a automatic decompression in the head now it keep blowing a hole in the piston.WHY


Hi, Brad I'm not sure why someone would weld a decompression unit in the head unless the threads were bad and it was leaking, if it's faulty it could be sucking air and create a hot spot (you may want to do a compression check) or the heat range on your spark plug is too hot/high or you have a pre-ignition issue.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
CR125 Keeps Eating Pistons
http://www.cafehusky.com/threads/shattered-piston-on-my-11-wr300.83126
Husqvarna workshop service manual 2000 WR 250 WR 360 amp CR 250 eBay $25
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna WR 250 2002 Owner Manual

Apr 04, 2017 | 2001 Husqvarna WR 360

1 Answer

Kick start husqvarna wr 360 2000 mdl snapped off completely can i use ktm kickstart for this ??


Hi, Dan for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2000 Husqvarna CR 250 WR 250 360 Workshop Service Repair Manual DOWNLOAD...
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna WR 250 2002 Owner Manual

Dec 26, 2016 | 2000 Husqvarna WR 360

1 Answer

Routing cables for throttle after replacing handlebars


you should take the cables into a motorcycle shop to be shortened to the correct length. extra long cables can melt on the exhaust and then stick and can be dangerous. also rerouting cables can cause extra stress if they are not strait enough to operate correctly...

Jun 05, 2014 | 2007 kawasaki Vulcan 1600 Nomad

1 Answer

Throttle cable


If you're not changing bar, just measure the length of the outer cable housing and get the same size.

The cable is held into the housing by a small spring clip that fits into a groove on the cable's ferrule.

With a small screwdriver, pick out the clip, and pull the cable out of the housing.

Mar 02, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

2 Answers

THROTTLELINKAGETOO LONG ONLY GET 25% THROW CAN iLOOP & TIE WRAP T-CABLE


You obviously have to buy the correct length &
install correctly

If a new part is not avail at a dealer- then try a used
one from salvage yard

Can not shorten or loop

Jan 19, 2013 | Cars & Trucks

1 Answer

Fuel lines came off husky wr 360 98 anybody know correct placements


The main fuel line goes from the fuel tap (pet cock) on the fuel tank to the fuel nipple on the left side of the carburetor. All other (small hoses) are just over flows that should be routed down and out of the way near the swing arm.

Oct 08, 2011 | 2000 Husqvarna WR 360

1 Answer

I don't know how much transmission oil need the Husqvarna wr360, 2000. I was buy this bike but I don't know how changing oil.


There is a screw on the side of the lower unit, you remove this screw, fill with proper lubricant and then hold the bike upright, it will then overflow to the proper level.

Jun 27, 2009 | 2000 Husqvarna WR 360

1 Answer

Need to replace out of stock throttle cables on 1984 Honda XR350R


Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock.
www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

I checked and they have your throttle cables in stock.

Please Top rate this answer. Thanks!

May 31, 2009 | 1985 Honda XR 250 R

1 Answer

Broken husqvarna kick starter (94 husky wr 360)


You are prbably going to have to pull the engine and split the cases just to get to the guts of the kick starter, but the good news is sounds like a broken spring. I only recommend spliting the cases if you are very experienced.

Jan 04, 2009 | 2002 Husqvarna WR 360

Not finding what you are looking for?
2000 Husqvarna WR 360 Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

choprboz5

Level 2 Expert

196 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...