Question about Harley Davidson FLHR-FLHRI Road king Motorcycles

1 Answer

When shifting it makes a clunking noise. what can i do to fix this

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Unlike their lighter counterparts, Harley-Davidson uses big strong gears in their bikes. That's why transmission problems with Harley motorcycles are rare. But, the downside of this is that the clutch dogs in the transmission make more noise that the tiny little clutches in the other bikes. And, since you didn't tell me what year model bike we're talking about, some years "clunk" more than others. The early four speed transmissions in the 60's were notorious for it, But as the years moved on and Harley improved their transmissions, the later years are much less noisy than the early years. Still if your transmission is a late model and it is "clunking" more than you like, check the clutch adjustment to see if it's dragging. Also since you didn't advise me of the model and year, I cannot help you with this adjustment. If you'll look at the some of the answers that have been given out, I'm sure you'll find one that tells you how to adjust your clutch. If not, please repost and I'll answer that question.

Good Luck
Steve

Posted on Mar 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haveing issues with clunking noise when my transmission shifts from 2-3. its a automatic transmission. 2004 trailblaizer ls 4x4.


Torch converter? They start making noise before they fail to work. But could be a list of things going bad
Need more info.?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jeff_24365d731679262d

Jan 27, 2017 | 2004 Chevrolet TrailBlazer

1 Answer

What would cause my 26 inch avalon bicyle to make a clunking sound when shifting from low to high gear?And how do I fix it?


Are you going 1 gear at a time or trying to go from first to high. On some bikes you have to allow the chain go from one gear to the nest and up the line or it will make a noise.

Mar 31, 2015 | Cycling

1 Answer

I have a clunknoise from my transfer case how do i fix it


most of the time a clunk from under the vehicle when shifting gears (whether going forward or reverse) is a u-joint. check them at both ends of the drive shaft. (possibly 1 in the middle, not familiar with your particular truck)

Jul 28, 2014 | 2008 Mitsubishi Pajero 3.2

1 Answer

Hotpoint fridge makes clunk-clunk-clunk noise when it shuts off


You need a new compressor. Probably time for a new frig.

Nov 18, 2011 | Hotpoint Refrigerators

1 Answer

Clunking front hubs


usually the noise in the front end is the u-joints or cv joints out towards the tires.

May 21, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Car drives and shifts, but theres a clunking noise


check the brake dust shield beind the rotor. That might be a good start. Not sure what you mean by clunking but also check your engine mounts bushing and sway bar bushing. Good luck

Apr 06, 2009 | 1998 Chevrolet Cavalier

1 Answer

4X4 MAKES A LOUD CLUNKIN NOISE THEN WONT WORK AGAIN


if its manual shift,its internal damage,if its elect.shift could elect.shift motor and,or internal damage

Mar 12, 2009 | 1999 GMC Sierra

1 Answer

1992 Nissan Sentra making a hard clunking noise when shifting


when the last time you made a tranny oil change ? or also check the level of oil when all that is done youncan get more technical lets see could be the shift bushing ... easy to install and if its a tranny probleme well maybe time to get that corvette you always wanted go big or go home ahahah good luck

Sep 21, 2017 | 1992 Nissan Sentra 4 Door

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

Mike

Level 3 Expert

4350 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...