Question about 1996 Suzuki VS 800 Intruder

1 Answer

Bike won't stay running - 1996 Suzuki VS 800 Intruder

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Suzuki Master
  • 500 Answers

Vacume petcock ? if it has a prime pos try there if not check hoses to it from manifold ..screen clogged in tank? pull petcock..

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs and starts great but won't idle


Hi, Emmett and the usual suspects are:
1. Idle speed improperly adjusted.
2. Inlet system air leak.
3. Leaking accelerator pump.
4. Loose low-speed jet.
5. Plugged low-speed jet.
6. Contaminated or plugged low-speed circuit.
7. Enrichner valve is not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
Motorcycle Message Board Motorcycle USA
2 stroke dirt bike problem Won stay running Please help motorcycles
Honda 650 Won Idle
http://www.sportbikeworld.com/forums/179-atv-dirtbikes/30570-bike-runs-fine-wont-idle.html

Mar 21, 2016 | Motorcycles

1 Answer

Starts but won t stay running


I would need a lot more information than this to diagnose anything. Like what has been done, checked etc. The year of the bike, EFI or Carburetted etc.

Apr 27, 2014 | Harley Davidson Motorcycles

1 Answer

Bike will not stay running


(1) harley vibrates make sure kickstand stays up.
(2) you have to find it. there is a tilt switch on bike.
if it lean over to far it will kill the bike. check to see if its ok.

Apr 21, 2014 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

2002 Yamaha r1 bike starts but won't stay running


Hi, Anonymous and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
07 R1 starts but doesnt stay running
Bike turns over but won stay running
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Nov 11, 2013 | 2007 Yamaha YZF-R1

1 Answer

Why wont My 2006 Suzuki boulevard won't stay running,? I bought a new battery and its not that. It turns on for a few seconds and idles real low then shuts off. The sound of the bike sounds like i


It sounds like it may not be getting enough fuel to the carb(s). Check to make sure that fuel is flowing from the tank. If not, it may be a problem with the petcock or the vents on the gas cap may be clogged.

Jan 28, 2013 | 2006 Suzuki Boulevard S50

1 Answer

BIKE WON'T STAY RUNNING AFTER JUMPER CABLES ARE TAKEN OFF....


Sounds like the battery may be either low or shot. Place it on a trickle charger overnite to see if it will take a charge. Once you get the bike to run without needing jumper cables to keep it running, check the charging system. Easiest way to do this is to get a battery voltage reading with a multi meter before starting the bike. After the bike is running, place the meter leads on the battery and work the throttle to get the revs up to about 2000. Meter reading should be somewhere around 13.8 to 14.2 voltsDC. It not close to these readings, you have a charging system problem.

Oct 17, 2012 | Harley Davidson Motorcycles

1 Answer

1983 Honda VT500 Ascot won't stay running without shaking bike, need help.


you have a clog must be something in the tank when you shake it it is letting fuel get thru clean out the tank and put some gas in it add some seafoam and this should get it clean the seafoam will not hurt the motor it cleans everything

Jul 07, 2011 | Honda vt 500 ft ascot Motorcycles

1 Answer

When i turn the ignition on and turn the run off switch to on the check engine lamp flashes and it won't start.


Turn the run switch back to the ON position and start the bike. The check light stays on until that switch is on to show it works.

Jul 03, 2011 | 2007 Buell Lightning XB12Scg

Not finding what you are looking for?
1996 Suzuki VS 800 Intruder Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...