Question about 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

Where do i check the oil on a 1998 1500 valcon

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • kawasaki Master
  • 81,424 Answers

There is a site glass on the side of the crankcase that contains the clutch, it is about the size of a quarter, the oil should be 1/2 way up the glass hot engine.

Posted on Mar 25, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a valcon classic 96 the fretion places change and fuild and filter 20-50 motorcycle oil it slips when cold

Is your clutch properly adjusted? Are you using the factory recommended oil? Start there and if you still have problems you may have to recheck for proper assembly of the clutch when you changed the plates and maybe put in stronger clutch springs. I hope this helps

Jul 12, 2015 | Motorcycles

1 Answer

How do I hot wide a 2010kawaskii valcon its a 900 what wires do I tutch I trident and got power and franked but no spark

Hi ! for kawaskii motorparts, please visit the website below. If you need more information about a specific electrical issue you can reach me at luck and have a nice day. Motor Part Store Motor Parts Wholesale

Apr 12, 2015 | Power Motorcycles

1 Answer

Low oil pressure in a ford sabre 350c marine.

Check oil level in sump. Check for correct viscosity of oil for area and temperature. Have the oil pressure check on a master oil gauge to check oil sender unit. Low oil pressure comes from worn big end/ main bearings---worn hydraulic tappets-- loose head tension and oil leaking from head gasket.

Aug 03, 2013 | Cars & Trucks

1 Answer

How do you increase hygiene!?!?!?!?

Bath or shower every morning, brush your teeth every morning and night, use under arm deodorant before you go out. Dress in clean and freshly ironed clothes.

Dec 13, 2012 | Valcon Games Survivor for Nintendo DS

3 Answers

My oil light is flashing red and making a dinging noise

Could just be out of oil. Check the oil. Don't drive it! If it has plenty of oil the oil sending unit maybe faulty.. Best have a shop check engine oil pressure with a mechanical oil pressure gauge before driving it.. Engine will be ruined if you drive it with no oil pressure.

Sep 16, 2011 | 2005 Buick LaCrosse

2 Answers

First and newtrol

Rock the bike back and forth, to loosen the clutch plates taking the load off the gears so you can shift up.

May 31, 2010 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

How to check oil and when to add oil

Check oil when oil is warm use a towel the stuffs hot.
Theres a yellow dipstick under the hood located on either side of the engine or on the back side of engine.Pull the dipstick out wipe it clean then check the oil after the oil is warm and the car sits for about 4 minutes not running.Gets all the oil to the pan.Check then if its not to the line on the warm side of the stick add oil. Check oil monthly and change oil every 3,000 miles you can add oil to the oil if low before 3,000 but do not mix two different oils use oil that the truck requires usually it tells you on the cap or inside the hood .

Jan 13, 2010 | 2008 Ford F 250 Super Duty 4WD

2 Answers

Oil light on

first make sure oil level is up, then check or just replace oil preasure switch, if light still comes on, have your oil preasure tested, could be low oil preasure or electrical problem start there. good luck.

Oct 29, 2009 | 1998 Dodge Intrepid

Not finding what you are looking for?
1996 kawasaki VN 1500 Vulcan Classic Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5065 Answers


Level 3 Expert

81424 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides