Question about Honda VT 600 C Shadow Motorcycles
There is 2 spots you can adjust your clutch.
1. on your clutch leaver there should be a tension screw where the cable goes in if you need more clutch you have to make sure to bring the screw out a bit
2. down on the side of your motor you will see a cable going in there should be a sleeve covering the cable pull up the sleeve and tighten the slack by bringing the screw out a bit.
Posted on Mar 25, 2011
Testimonial: "thank you very very much... i will try these two suggestions... you have been very helpful..."
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Based on the information you have provided I suspect a bent shift fork in your transmission. To fix it you will have to take the transmission cover off and get at that fork. Replacing the fork is probably easiest, the labor to get to it is the expensive part.
Posted on May 27, 2009
You should have disc brakes??? They are not adjustable.
It is common for a caliper piston to freeze up or become corroded and bind up so it will not move freely.
Posted on Aug 12, 2009
Tips for a great answer:
Jun 29, 2017 | Honda VT 600 C Shadow Motorcycles
Apr 13, 2017 | Suzuki VT750DC Shadow Spirit Motorcycles
Mar 08, 2014 | 1984 Honda CB 700 SC Nighthawk
Nov 17, 2011 | Honda Motorcycles
May 19, 2010 | 1984 Honda VT 500 C Shadow
Apr 24, 2010 | Honda VT 750 C2 Shadow Motorcycles
Aug 12, 2009 | 1984 Honda VT 500 C Shadow
Aug 08, 2009 | 1984 Honda VT 500 C Shadow
May 27, 2009 | 1984 Honda VT 500 C Shadow
611 people viewed this question
Usually answered in minutes!