Question about 2005 Aprilia Sportcity 125

1 Answer

Had a service and the spanner indicator was not removed. Garage has now gone so how do you get rid of the spanner from the display

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

Hi,,ok i know how to reset the spanner on a rs 125 and there is a good chance it is the same procedure for your scooter.

hold the mode button down for 5 seconds,,,still holding it turn the ignition on,,keep holding mode for 15 seconds with ignition on,,the spanner will clear,,,if not repeat again.

Posted on Mar 23, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you reset the Inspect indicator with the service spanner on the dashboard of a 2007 Polo Classic 1.9 TDi

Hi,if the spanner comes up and there is a beeping sound,try turning the ignition off then push the button in thats near the spanner clock,hold it for a cupple of seconds then still holding it down turn it from left to right and let go,turn the ignition back on and hopefully its gone,if not try again just in case you made a mistake.
hope this works for you,all the best.

Aug 08, 2016 | Cars & Trucks


Service spanner

with ingintion off push trip reset button keep it pressed in and switch ingintion on still keeping trip pressed in you will be able to see in display will be counting down from 10 when it gets to zero lose trip switch car off and back on spanner will have gone out

on Oct 02, 2011 | 1991 Peugeot 405

1 Answer

Dorsoduro service spanner

Hi, Swimboy84 here is how to reset/adjust Engine Service Interval (Wrench icon)
Upon selecting this item, there are two possibilities. If the Wrench icon is active, you will have the opportunity to clear it--proceed directly below. If the Wrench icon is not active, then skip over the next section to "CHANGE ENGINE SERVICE INTERVAL".RESET WRENCH ICON:
1. The display shows CLEAr and no.
2. Press and release SCROLL to alternate between no and yES.
3. Select yES if you wish to reset the wrench icon.
4. Press and hold SCROLL for 4 seconds.
5. WS appears in the display.
6. Release SCROLL.
If you selected no, you will not proceed to the next section; the display will revert to the Service Setup Menu.
To get to this point, the Wrench icon must not be active or you just now reset it, as above.
1. The display now shows either CLK or km/h (or Mph).
2. The display now shows the number of hours between Wrench icon reminders. The factory setting is "0044".
3.The 2nd digit of the hours value will be blinking:
In addition, the display also shows the Oil Can icon above the word "OIL", and the "CLK" indicator is present. The presence of "CLK" indicates the interval occurs based on time (this can be altered for the Wrench icon, but not for the Oil Can icon).
For more information about your issue, please visit the websites below. Good luck and have a nice day
DOWNLOAD 2011 Aprilia Dorsoduro 750

Sep 30, 2012 | 2011 Aprilia Dorsoduro 750

1 Answer

Reset service indicator on Fiat Bravo. Service has been done at 18000 miles but indicator still says service required.

Hello! 1... Switch ignition off...2... Press and hold down the left button next to the seat belt light...3... Switch ignition on...4... Keep the button held down until the display reads 0 and the 'spanner' symbol goes off...5. Switch ignition off...

Nov 16, 2011 | Cars & Trucks

1 Answer


Should be same as 607
Switch ignition off
Switch ignition on
Display will count down
When display reads 0,release trip button
Spanner symbol will go out

Jul 13, 2010 | 2006 Peugeot 604

2 Answers

Hi i have just had my car Renault Clio on a 06

- By dancer23 on Feb 18, 2010 -

Earlier i posted a question requesting how to switch off the service light on my Renault Clio, i have found an answer to thios, as follows.
How do you reset the service indicator light 2007 renault clio?

Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.
Turn on the ignition, but don't start the car. On the right stalk there is a toggle switch that hinges up and down, and is used for going through the different features of the display. When the display shows 'Service Due' press and hold the top part of this switch for 10 seconds until the dispaly resets and it shows 30,000km or whatever until next service.

all of the above is correct apart from pressing the toggle button. if you instead press the bottom toggle button for 10 seconds the display will start to flash. Keep button depressed and 5 seconds later the service counter will reset.
I know this works as i have just done it myself,
I hope this will help many others .

Feb 18, 2010 | 2006 Renault 181

1 Answer

I have the spanner light on the display

The printer is indicating that it is time for a service, take it in to the service agent for a service.

Aug 03, 2009 | Panasonic WORKiO DP-1820E All-In-One Laser...

2 Answers

The spanner light has come on on the display panel what does it mean - I have a renault clio 1.2 , registered in 07

The spanner is usually an indication that the car needs a service. If the car has just been serviced return to the garage and ask them to reset the service insication. If not take the car in for a service.

Dec 22, 2008 | 2003 Renault 181

1 Answer

Holden barina 2003

it means its due for service. If u wanna get rid of it without servicing the vehicle then as you start the car simultaneously push the ODOMETER reset button on the dash and it will wipe it. This will however just delay the point your car needs servicing.

Jun 04, 2008 | 2003 GMC Sierra

Not finding what you are looking for?
2005 Aprilia Sportcity 125 Logo

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts


Level 3 Expert

79865 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4903 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides