Question about Honda CBR 1000 RR Fireblade Motorcycles

1 Answer

Bike started missing after installing mirrors wth turn signals in them and replaced turn signal bulbs on bike with singal filliment bulbs and cut the wires off taped them up that made the marker lights stay on

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Honda Expert
  • 191 Answers

You might want to inspect the wires you tied into for the mirror signal lights.....did you cut into the wiring harness to make a connection? It sounds like you may have damaged a wire on the ignition circuit and it is shorting to ground...or you tied into the ignition power and the lights are drawing down the voltage on the circuit.

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove mirror mounted turn signal on toyota prius c


Discussion in 'Prius c Accessories and Modifications' started by WD0AFQ, ... You don't need to removethe Mirror head from the car or the door trim panel. ... You can't replace just the bulb in the mirror mounted turn signal. The bulb, plug and lens are a sealed unit. Toyota really did a number on this design.

Mar 10, 2017 | Toyota Prius Cars & Trucks

1 Answer

I have a 03 Alero 2.2L and the clicking sound of the turn signals kept going on even though I wasn't using them. I located the hazard switch and replaced it and that seemed to take care of that but now I...


If this turns out to be an electrical wiring problem, it will be a doozy!

I once found a problem with a friend's tail lights doing crazy things, signals bouncing all around, blinking when they shouldn't and so forth, reminds me of yours. He had replaced bulbs in a tail light with entirely wrong bulbs, was a two filament bulb (you know, with two little button terminals on the base) in a one filament, single contact button socket...or maybe vice versa, was a long time ago, but was the wrong bulb anyway, and caused that whole side of the rear lights to go crazy and just about drove him crazy too. Does this sound eerily familiar?
I would check the bulbs, make sure they are the right ones. Those corner lights, are they supposed to blink with the turns, or no?
Finally, and this may turn out to be your problem, you may have a bad turn signal switch. On American made cars, the brake light wire is routed through the turn signal switch. That's why they share the same filament in the same bulbs they work at...yeh, check the bulbs, then try a used turn switch from a salvage yard-just plug it into the harness connector without installing it first, and see if it solves the problem. If that not it, you will need professional help-and counseling maybe by then...no, I'm joking. Post back with what you find out.

Sep 19, 2013 | Cars & Trucks

1 Answer

Turn signal flashes quicker occasionally


If you have a trailer hooked up, extra brake light on bike carrier or any other extra lights that were not installed at the factory, when it flashes quicker then you need a heavier duty flasher, to handle more bulbs on the circuit. Can be picked up at any auto parts store. Or one of the aftermarket lights connected may have a bulb not working. If not anything extra than usually means a bulb is not working somewhere in the factory installed lighting system, turn signal, side marker, bulb on back of mirror, tail light bulb or dashboard indicator lightbulb.

Sep 15, 2012 | Mopar Chrysler Town & Country 2001-2008...

1 Answer

Turn signals not working


1: if the turn signal is not flashing the arrow just illuminates on the dash and says lit you might have a to change out the bulbs to working ones. on my jeep the bulbs turned on but the extra filliment on the bulb was burned out and didnt allow my lights to flash.
2:if the bulbs are good then replace the flasher is a 10.00 part you can get at the autopart store it usually next to the fuse box or clipped on the steering colum.
3: the switch might have a corrosion build up that does not allow the votage to go through the switch. you will have to remove the steering wheel to repair this
4: check your fuse.

Aug 25, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Right tail light goes out when stepping on brake and right turn signal stays on when engaged


One of the filliments is probably burned out in the bulb.Replace the right tail light bulb.

Apr 24, 2011 | 1995 Pontiac Grand Am

1 Answer

Install auxiliary running light and directional indicator mirrors


Jim as a mech at the HD place he cant modify it,but you can.Bench test the part then meter the circuit on the bike you will have it in no time.

Apr 25, 2010 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

2001 side mirror turn signals do not work. Fuse


If the turn signals on the truck work correctly, this would be a bulb issue.

The best directions I have found with pictures are from Muth ( mfgr of signal mirrors ) : www.kwmuth.com
Enter truck info, and on the product listing page are the install directions for download in PDF format. Download, and use the directions to the glass removal. Once the glass is out, you will see the bulb holder for the signal on the edge of the glamor cap, think this is a bulb type 39 ( ??)
Have seen some people just move the glass all the way in ( so the gap is at the signal side of the mirror head ), and work it this way, I have not done this myself.

Feb 02, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Right read blinker/break light dont work, turn signal blinks rapidly


It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.

Apr 20, 2009 | 2005 Ford Explorer

3 Answers

Brake lights/rear turn signals


I had the same problem with my 1999 Yukon. The electric board needed to be replaced. Rust starts to build up and shorts out or blows the bulb. The dealership charged $73.60 for the part and I installed it myself (Saved $30).

Dec 14, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5057 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...