Question about 1982 Yamaha XJ 650

1 Answer

I have yamaha 750 seca removed oil filter a few days ago to get new one and dont remember which way to install the new one can u help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Yamaha Expert
  • 191 Answers

Okay, with the removable filter element that I believe you have (used on many models of that era)

starting with the filter bolt with its small o ring through the cover...
place the spring on next
then the thin flat washer ******
then rotate the filter element onto the bolt working its way down to the spring (do not try PUSHING the element on as it will tend to dislodge the end seals of the element, causing filter bypass)
oil the large o ring and place in the cover groove (I use a dab or two of grease to hold in place)
install the cover /bolt assembly with the two square corners up.

**** your flat washer might be missing, as they tend to get lost in drain pans over the years...the flat washer protects the sharp end of the spring from damaging the element end seal.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine wont turn over and i dont want to damage anything, by the way its a 750 yamaha seca


Hi, Greg and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
1982 yamaha seca 750 engine wont turn over
1982 Maxim won turn over
Yamaha XJ750 1980 1984 Manuals
OEM parts for Yamaha
Yamaha XJ750 Owner Manual
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

Feb 09, 2017 | Yamaha Motorcycles

3 Answers

What other items need to be changed after 10 year dry storage on 1981 yamaha seca


I would be aware the fork oil seals can start leaking after it gets used, I bought a CB 750, owner said fork seals were good lol not even ridden it and the right one started weeing out oil, ME PERSONALLY WOULD TAKE IT FOR SHORT RUNS LOCALLY AND WAIT AND SEE the brakes on these were a bit odd, is it cable to master cyclinder, I have a 750 seca, nice bike right till the drunken heffer 3½ times over the limit stuffed me in the front on my side of the road. fork seals are easy to do

Apr 26, 2014 | 1981 Yamaha-1983 Xj550 Xj 550 Maxim Seca...

1 Answer

Remove air box on 81 yamaha 550 maxim


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
removal of airbox for xj550 Seca
Installing Stock Air Box on XJ550 Seca
DOWNLOAD YAMAHA XJ550 Maxim Seca REPAIR SERVICE MANUAL Download Manuals... $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

Apr 01, 2012 | Yamaha Motorcycles

1 Answer

How much oil should i add to my 1981 xj 750


Hi Kyle, many riders are over filling their oil system because they do not know how to properly read their oil site glass. The following procedure works on nearly all 4 stroke engines but to be on the safe side you should always refer to your owners manual. Use your center stand if you have one.
1. Bring the engine up to operating temperature or let idle for 5 minutes.
2. Turn off your engine and let it sit for 2 minutes, this will allow the oil from the top end to drain to the bottom.
3. Hold your bike straight up or on the center stand and wait 2 minutes for the oil in the bottom of the engine to be level in the sight glass.
4. Your oil level should be between the top full mark and the bottom add mark.
5. Never over fill your oil system it will cause problems:
a. oil leaking out of exhaust pipes.
b. oil leaking out of breather pipe/hose.
c. oil carryover into the air cleaner.
6. Your oil site glass must never be completely full drain as necessary.
7. Your oil site glass must never be completely empty add as necessary.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Just bought 1981 seca 750 OIL CHANGE HELP
1982 Yamaha 750 Maxim Oil Change with middle gear drain plug location
Yamaha XJ750 Owner Manual service manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

Oct 30, 2011 | Yamaha Motorcycles

1 Answer

I bought a 1981 Yamaha 750 seca and I've had it for about a month. I was riding one day when it started revving really high as I was downshifting when coming to a stop. It is now stuck in first gear....


Hi, 750seca and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return springs weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
XJ550 Maxim won shift gears
81 yamaha seca 750 shifting problems
Yamaha XV535 Owners Workshop Manual
OEM parts for Yamaha
YAMAHA XV535 Owner Manual

Aug 23, 2011 | Yamaha Motorcycles

1 Answer

Could you please show me a 1981 yamaha xj750 seca fusebox diagram or an electrical manaul? please.


Hi, 11545 for this scenario you will need your service/owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day. 1981 yamaha xj750 seca fuse box diagram Google Search
HOW TO Install an aftermarket fuse box
Yamaha XJ750 Owner Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

May 05, 2011 | 1982 Yamaha Xj750 Xj 750 Y140 Maxim Air...

1 Answer

1983 Yamaha Seca 750 no spark


Check the battery should be 12V or more , Then check the coils the connections are under the gas tank make sure they are securely connected.
What kind of fuse box do you have? The glass fuses? Or did you replace the fuse box. If it is the glass fuses you need to replace with a new fuse box.
Check the kill switch and the side stand switch.
Check the coils too..

Oct 04, 2009 | 1983 Yamaha XJ 650

2 Answers

Fork seal replacement on 82 yamaha 750 seca


On the top and bottom parts of the triple tree either both or one will have bolts. First take the fender off. Take the front tire off. Loosen the bolts on the triple tree. They should slide down. If not you have to get a rubber mallet and tap on the top of the fork and twist the fork as you are doing this. Once it is out, pull the dust seal off the top of the lower fork. There will be a clip inside, take the clip off drain the oil out of the top or bottom depending on how the forks are made. Push the fork tube down into the lower fork slightly, pull both apart with a firm tug and they should separate.

Sep 19, 2009 | 1982 Yamaha XJ 650

3 Answers

Oil amount in XJR400


When you changed the oil filter. YOu need to add .4 more liters when you removed the oil filter. This applies to the Yamaha XJR400
Details:

2.0 liters when oil filter not removed.
2.4 liters when oil filter removed or changed.

levibit@yahoo.com

Feb 19, 2009 | 1994 Yamaha XJR 400

Not finding what you are looking for?
1982 Yamaha XJ 650 Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...