Question about 2000 Harley Davidson XL 1200 C Sportster Custom

1 Answer

I have an '06 1200c the battery went flat, i replaced the battery with a new fuly charged on, now all i get is the starter relay clicking. I have reset the alarm system but still nothing. Any ideas? thanks in anticipation Graham

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

First why did the battery die? Is it Old? Did you check the charging sys.? Stator? your problem may not have been the battery starter could be stuck put it in gear and rock the bike see if bendix releases try it again check your sys.

Posted on May 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

So my 1990 corolla just stopped working we go to turn it on and get nothing only a small click in the fuse box under the hood Have changed fuses and batterery Was working fine until the batterey went flat...


It sounds like you have a problem with the starter solenoid or the starter relay. Usually, a "click" heard under the hood with a good battery indicates a faulty starter solenoid. In this case, the starter wants to work, but the solenoid which is usually attached to it won't transmit the necessary power to run the starter and crank the engine. Starter replacement is the only remedy in this case. If the click is heard from the fuse box, then it may only be a relay that is the culprit. Try swapping the starter relay with the horn relay or another one that has the same part number. Be sure to also check that the battery connections and grounds are clean and tight.

Apr 23, 2014 | Cars & Trucks

1 Answer

Motorcycle won't turn over just get a clicking noise from a relay under the seat.


Check the connections they may be loose. If the connections are loose just tighten them and it should work. If not replace the battery. Most of the time if a battery sulfates it will still show a full charge but will not have the CCA (Cold Cranking Amps) to start the bike. Take the battery and have it tested. CycleGear can test the battery I think. If not most autozones can check the battery. I am 99% sure it will need to be replaced. If the relay or solenoid were bad there would be no clicking at all.

Dec 30, 2013 | 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

Audi just stopped while driving, tryed too start it and it wont start


READ THIS ALL BEFORE YOU DO ANYTHING
NOTE: some vehicles have the starter relay and starter mounted together as 1 unit. Sometimes the starter relay and starter are seperate. When I refer to "relay" it could also mean the starter and relay as 1 unit.
Note: "starter switch" is not to be confused with "key switch", although sometimes they are all one unit. The starter switch is usually mounted on the steering column and actuated by a metal rod. On units that are all one unit, the keyswitch/starter switch (both one unit) will have to be replaced. (this is a rare problem, so don't get worried just yet)
1. Check battery voltage, should be between 12.5-14.5 volts. if low voltage replace or charge battery, and try to start car, if it don't crank with new or charged battery, move on.
2. Check connections on the starter relay, even the small one coming from your starter switch. if loose or corroded, clean with a brush and reconnect them. Try to start your car. Did it start? if not, Move on
3. Well now we know the connections aren't the problem. How about a click? did you hear one? If a click is heard, go to #4, if nothing is heard, go to #5
4. Well at least the relay is clicking, but nothing else is going on. The relay is working, so the starter must be bad. Replace the starter and start your car!
5. Humm, connections aren't the problem, maybe the relay is bad, replace your relay with a new one. Move on
6. Now we have a new relay, with clean and tight connections. Start your car. Does it start? If yes, then HORRAY! we fixed it. Does it click? If so then goto #7, If it don't click, then goto #8
7. So here we have a new relay, with good connections that will click when trying to start the car, but nothing else happens. Starter is faulty, replace the starter, and off you go, see ya!
8. So here we have a new relay, with good connections, but it still won't click when we try to start our car. This means that your starter switch is faulty. Replace starter switch and try to start your car. Vroom! finally done with this car problem!
List of shortcuts: if you remove the starter switch lead (small wire) from the relay and apply +12v to its respective prong or lead on the relay, and your starter cranks, your starter switch is faulty. You can actually hook up a starter button this way. If you jump the two large wires together on the relay and it cranks, then the relay is faulty. If you jump the two large wires together and nothing happens, then starter is faulty, or wires to starter are loose or broken.

Dec 13, 2013 | Cars & Trucks

1 Answer

Turn key to start and nothing


Low or dead battery most likely, use this procedure to trouble shoot the system:
READ THIS ALL BEFORE YOU DO ANYTHING
NOTE: some vehicles have the starter relay and starter mounted together as 1 unit. Sometimes the starter relay and starter are seperate. When I refer to "relay" it could also mean the starter and relay as 1 unit.
Note: "starter switch" is not to be confused with "key switch", although sometimes they are all one unit. The starter switch is usually mounted on the steering column and actuated by a metal rod. On units that are all one unit, the keyswitch/starter switch (both one unit) will have to be replaced. (this is a rare problem, so don't get worried just yet)
1. Check battery voltage, should be between 12.5-14.5 volts. if low voltage replace or charge battery, and try to start car, if it don't crank with new or charged battery, move on.
2. Check connections on the starter relay, even the small one coming from your starter switch. if loose or corroded, clean with a brush and reconnect them. Try to start your car. Did it start? if not, Move on
3. Well now we know the connections aren't the problem. How about a click? did you hear one? If a click is heard, go to #4, if nothing is heard, go to #5
4. Well at least the relay is clicking, but nothing else is going on. The relay is working, so the starter must be bad. Replace the starter and start your car!
5. Humm, connections aren't the problem, maybe the relay is bad, replace your relay with a new one. Move on
6. Now we have a new relay, with clean and tight connections. Start your car. Does it start? If yes, then HORRAY! we fixed it. Does it click? If so then goto #7, If it don't click, then goto #8
7. So here we have a new relay, with good connections that will click when trying to start the car, but nothing else happens. Starter is faulty, replace the starter, and off you go, see ya!
8. So here we have a new relay, with good connections, but it still won't click when we try to start our car. This means that your starter switch is faulty. Replace starter switch and try to start your car. Vroom! finally done with this car problem!
List of shortcuts: if you remove the starter switch lead (small wire) from the relay and apply +12v to its respective prong or lead on the relay, and your starter cranks, your starter switch is faulty. You can actually hook up a starter button this way. If you jump the two large wires together on the relay and it cranks, then the relay is faulty. If you jump the two large wires together and nothing happens, then starter is faulty, or wires to starter are loose or broken.

Dec 13, 2013 | 2000 Ford Escort

1 Answer

Car won't turn over. Battery & starter relay good.


  • READ EVERYTHING BEFORE YOU DO ANYTHING

  • NOTE: some vehicles have the starter relay and starter mounted together as 1 unit. Sometimes the starter relay and starter are seperate. When I refer to "relay" it could also mean the starter and relay as 1 unit.
Note: "starter switch" is not to be confused with "key switch", although sometimes they are all one unit. The starter switch is usually mounted on the steering column and actuated by a metal rod. On units that are all one unit, the keyswitch/starter switch (both one unit) will have to be replaced. (this is a rare problem, so don't get worried just yet)
1. Check battery voltage, should be between 12.5-14.5 volts. if low voltage replace or charge battery, and try to start car, if it don't crank with new or charged battery, move on. 2. Check connections on the starter relay, even the small one coming from your starter switch. if loose or corroded, clean with a brush and reconnect them. Try to start your car. Did it start? if not, Move on 3. Well now we know the connections aren't the problem. How about a click? did you hear one? If a click is heard, go to #4, if nothing is heard, go to #5

4. Well at least the relay is clicking, but nothing else is going on. The relay is working, so the starter must be bad. Replace the starter and start your car!

5. Humm, connections aren't the problem, maybe the relay is bad, replace your relay with a new one. Move on

6. Now we have a new relay, with clean and tight connections. Start your car. Does it start? If yes, then HORRAY! we fixed it. Does it click? If so then goto #7, If it don't click, then goto #8

7. So here we have a new relay, with good connections that will click when trying to start the car, but nothing else happens. Starter is faulty, replace the starter, and off you go, see ya!

8. So here we have a new relay, with good connections, but it still won't click when we try to start our car. This means that your starter switch is faulty. Replace starter switch and try to start your car. Vroom! finally done with this car problem!

  • List of shortcuts: if you remove the starter switch lead (small wire) from the relay and apply +12v to its respective prong or lead on the relay, and your starter cranks, your starter switch is faulty. You can actually hook up a starter button this way. If you jump the two large wires together on the relay and it cranks, then the relay is faulty. If you jump the two large wires together and nothing happens, then starter is faulty, or wires to starter are loose or broken.

Dec 10, 2013 | 2002 Oldsmobile Aurora

1 Answer

Nissan Altama Starter Relay electrical problems or a fuse?


Double check the battery positive connection wiring carefully as it commonly has connection problems when the battery is changed.

Apr 08, 2017 | 2004 Nissan Altima

1 Answer

My cars Battery is 95%fuly charged charged but starter wont turn over where is the fault .starter or altenator


Not the alternator. If the battery has a sufficient charge, the start should turn regardless of the condition of the alternator. Try using a battery charger to be sure battery if at 100%.
Are your battery terminals clean, no corrosion and attached tight?
If starter still will not turn, problem could be wiring or bad starter solenoid.

Feb 06, 2011 | 1995 Nissan Maxima

2 Answers

2001 Dodge Ram 1500 5.2 Battery died and Replaced also Starter still no start just loud click from new starter and does not turn over engine but can be push started by pop clutch and runs fine


Assuming you replaced the solenoid with the starter, it may be the relay. If the relay is not making a good connection, it might have trouble throwing the solenoid. The relay should be in the relay box under the hood. You can break the relay open and watch it work while someone turns the key to verify the problem.

Sep 20, 2010 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2000 Harley Davidson XL 1200 C Sportster Custom Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...