Question about 2007 kawasaki Eliminator 125

1 Answer

Is there a drive chain adjustment on a Kaw. Eliminator 125, 2007?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • kawasaki Expert
  • 191 Answers

Look at this diagram.....
item 33040 is the adjuster....there is one on the end of both swing arms...where the axle goes through the swing arm and the wheel.
http://www.mrcycles.com/fiche_section_detail.asp?section=362999&category=Motorcycles&make=KAWASAKI&year=2007&fveh=8445

Typical procedure on chains...loosen axle nut, loosen adjuster locknut, then turn adjusters both sides equally to move the axle and wheel to get proper chain tension, tighten adjuster locknuts, tighten axle nut.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1986 kaw.600zx ninja motor is blown i can get a 1986 zl600 from kaw. Elimetater can i take the zxmotor out and put the zl600 into the ninja frame and run chain drivee


Hi, Brian after careful deliberation 4 out 5 Kawasaki Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.carlsalter.com/download.asp?p=1382
OEM Parts for Kawasaki
Kawasaki Service Repair Owners Manuals Page2
Kawasaki ZL 600 1986

May 31, 2016 | Motorcycles

2 Answers

What is the correct intake and exhaust valve clearance of kawasaki wind 125


Perfecto, .006 mm intake,.008 mm exhaust.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Kawasaki Wind 125 Part 7 BR125

Manual Kawasaki Bajaj Wind 125

How to adjust motorcycle valve clearance

Valve noise adjustment cam chain Kawasaki Forums

Mar 11, 2016 | kawasaki Motorcycles

2 Answers

Husqvarna 50 chain keeps coming off


Are you adjusting the chain tension correctly?? Make sure the bar in installed correctly with the tension adjustment pin in the appropriate hole. Elevate the tip of the guide bar while adjusting the chain adjustment screw until the chain is snug but not tight. Then tighten the bar bolts without lowering the tip of the bar. Also ensure the drive links are engaging the sprocket correctly.

If the chain is adjusted correctly and the problem still exists, remove the sprocket side cover, bar and chain and inspect the sprocket for extreme wear. Once the sprocket is worn excessively it won't want to engage the drive links of the chain correctly which could be the source of the problem. If so, replace both the sprocket and the chain because the excess wear of the sprocket could have damaged the drive links of the chain and putting an old worn chain back on with a new sprocket will cause the new sprocket to begin wearing prematurely.

Apr 12, 2015 | Husqvarna Garden

1 Answer

Lost the chain connection lug and need a part number to order one


You MIGHT be able to find one in a bicycle shop. Also some industrial hardware stores like Grainger that stock power transmission products of chains and sprockets might be an alternate source.

Jul 08, 2011 | Eliminator Pearl H2000 Powershifter...

2 Answers

I need the carborator float bowl adjustment for my kaw zg 1000 1998 I know that it is the same for the eliminator.


r u sure--chec in a clymer manual or ask a dealer tech--too lean will burn an engine--too rich fouls plugs

Jun 14, 2011 | kawasaki ZL 900 A1 Eliminator Motorcycles

2 Answers

Is there a tension adjustment for the chain inside the transfercase


no there is no chain adjustment for any transfer case drive chain in ford or mercury vehicles

Dec 29, 2010 | Mercury Mountaineer Cars & Trucks

1 Answer

Starter clutch trouble on Kawasaki Eliminator ZL600


please dont unless your a pro or from japan the clutch is on the rite or left on engine under a face plate-get a manual or bring to cycle salvage yard-theyre oldschool-it maybe just a simple adjust 0n cable or unit

Jul 30, 2009 | 1985 kawasaki ZL 900 A1 Eliminator

2 Answers

Chain wo:nt maintain tenshion after just a few cutting sessions ect;can a link be removed?


your drive sprocket is probably warn out and will tear your drive link apart there fore stretching your chain...you can take out a drive link to give more chain adjustment...but thats a short term fix up as it will stretch the chain again until it snaps...not a pleasent thing to happen to you...i would get a new drive sprocket and a new chain

Jul 29, 2009 | Racor Heavy Duty Hook For Bikes, Clubs,...

2 Answers

Alternator not charging battery on getting 11.5


I had the same problem with my 900 that I just bought, the regulator was fried, so the local kaw shop replaced it with a new one off internet, then it promptly fried the new one, upon further investigation the rotor/armature was reading 1 ohm resistance, supposed toread 4/7 i think anyway, had to have alternater rebuilt , cost 370.00 , works fine now.

Jul 11, 2009 | 1985 kawasaki ZL 900 A1 Eliminator

Not finding what you are looking for?
2007 kawasaki Eliminator 125 Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...