Question about 2000 Harley Davidson FLHRCI Road King Classic

1 Answer

I have a leak around the check valve or o ring area. What is causing this and how is it fixed.

Posted by on

  • eugene0826 Mar 20, 2011






    I have a leak around



    Problem with 2000 Harley Davidson FLHRCI Road King Classic Motorcycle



    I have a leak around the check valve or o ring area. What is causing this and how is it fixed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Harley Davidson Master
  • 500 Answers

Id replace the O ring & check areas for burs & sand..

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When plugs were replaced oil in plug housing.2004 chev trailblazer 6cyl 4.2ltr


flashing light means dont drive or u can or will cause more damage to vehicle --[the computer is registering a damage causing malfunction] can be reason oil on plugs --need to have code read to properly pinpont problem--as to oil on plugs multi reasons such as bad oil seals on valve--valve bad-bent-burnt---head damage-gasket-cracked-warped---piston-cylinder-rings etc--need to do a compression test to determine the extent of damage

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

2 Answers

My car is burning threw oil like supper fast


year, make, model, engine size?

How does it run?

Do you see a lot of black smoke out the tailpipe when you accelerate?

do you see anything leaking?

Apr 04, 2013 | Cars & Trucks

1 Answer

Pt cruiser is using a quart of oil every 100 miles


Should be a leaking oil pressure switch.
First, check to oil filter, area to see if the oil is obviously coming out around the filter. Filter and area around it should be dry,.
There has been rare instance of the "o-ring" on the top of the oil filter sticking to the engine when the filter was changed, and the new oil filter then won't seal because there are now 2 gaskets between the filter and the engine block.
Check the engine drain plug. Is it loose or stripped? That area should also be clean and dry.
The valve cover gasket should be clean and dry all the way around.
Most common cause for that much oil use is the oil pressure switch, should be leaking with the motor running.

Jan 04, 2013 | Cars & Trucks

1 Answer

Hitatchi nv45b2 trigger leaking


Air leaking around the trigger area could be caused by vinyl ball / gasket under trigger valve bushing or orings within the gun. Easy test, remove nails and connect air (assuming that air is now leaking around the trigger area). Depressing the trigger stops the leak, replace vinyl ball. Depressing trigger does not stop leak, move plunger b (plunger B, small shaft under bubber bushing next to the trigger valve) with your finger in then out to determine if air leak changes tone. If air leak changes sound or tone, then air is leaking past orings of the cylinder guide and/or cylinder plate and/ or the cylinder itself is scratched by debris where the orings make contact. Pull out the cylinder and examine the contact areas. If scratched, use 300 grit paper to smooth, if smooth, however, suspect the orings of cylinder guide (or cylinder guide is cracked). The cylinder guide is difficult to remove and install without causing damage to guide or cutting new orings when installing. Do not remove the guide unless all the other options have been checked. One last bit if information, I have noticed that some guns will leak air if the orings on the feeder piston do not fit snuggly. Make sure that leaking sound is not coming from feeder area (remove the basket and feeder/feeder pin/spring and pull out the feed piston, making sure that the largest oring is making good contact within the cylinder). Good luck with repair.

Sep 28, 2012 | Hitachi NV45AB2 Roofing Coil Nailer

1 Answer

Excessive water left behind and posible leak. What is the best way to trouble shoot the cause and fix the problem ?


Hi your problem is most likely the suds valve, also known as the check valve piston, if it's worn out this will cause water to be left behind. It should be located towards the back of the dishwasher. There are two flap valves that could also cause the problem one is in the main pump and the other in the check valve body which connects to your drain. As for the leak, I had a similar problem and it was leaking where the drain solenoid o-ring is located. If that's not where it is leaking, then inspect all areas where there are any hose clamps for mineral deposits then either replace the hose or tighten clamps if necessary.

Apr 07, 2012 | GE Dishwashers

1 Answer

89 ford v-8 e-350 fleetwood blue smoke coming out the exhaust what would problem be?


blue smoke is usually caused by oil getting into the cylinder combustion area, either past rings, valve seals, or valve guides, all being expensive to fix-first though, check the PCV system for leaks or a plugged PCV.

Jun 16, 2011 | 2002 Ford E350

1 Answer

NRA833AA model. air is leaking out of trigger valve & will not fire. require manual to check operation.


Here is a link to hitachi web site listing for your gun. Look at the bottom of the page for pdf files of parts lists and manual.
http://www.hitachipowertools.com/store_item.php?iID=154&arrPath=1,9,43,p154,

There are two areas around trigger that can leak air. Spray soapy water on trigger stem and/or plunger valve. If leak is at trigger stem check vinyl ball. If leak is at plunger valve, most likely worn or broken oring inside of gun. Remove head and pull outer ring to reveal two orings. A worn outer oring will cause leak at plunger. If orings are ok on outer ring, pull cylinder and check for scratches where orings contact. If scratched, sand with 400 grit paper untill smooth and repack gun with oring kit. Good luck.

Jan 09, 2011 | Hitachi NR83AA3 3 1/4" Clipped Head...

2 Answers

Duofast ms 7664c staple gun still blowing air out


This series of nailers are the most difficult to repair. Your nailer has twice as many orings as the norm. Many have said that this nailer is over-engineered. There are three areas that could cause trigger area leak. To make it simple, lets do one area at a time. Use soapy water around the trigger area to find actual leak. If air is leaking from actual trigger valve (ms719-2) and its counterpart, the cartridge (ms719-1) then these two parts need to be removed. Check for scratches in the metal of the valve. If scratched try to remove with fine paper or replace as necessary. Most leaks are due to faulty trigger valve. If air is not leaking from actual trigger valve then remove the dump valve (mn120-5) at the back of the head of gun. There should be two small allen screws then metal lid, then spring and oring. Pull out dump valve and make sure all the orings are in order. This valve should be able to move, not too tight. Use silicone paste lube on all orings (available at Lowes in plumbing department, Danco brand used for faucet orings). Reinstall dump valve and related parts and check for leaks. If air seems to be leaking from bottom of gun neer trigger, most likely problem is cycle valve (mm419-1) and related vinyl seat. These two parts are in the valve housing under the trigger. This valve also moves within its housing and seats on a vinyl oring. This part could be clear vinyl or black rubber. New seats are clear. Inspect these parts for scratches/cuts and lube with silicone paste. Hopefully you would have solved the problem with trigger valve. Good luck with your repair and do not dispare, this is one of the most difficult guns.

Jun 18, 2010 | Duo Fast Air Tools & Compressors

1 Answer

I have a oil leak in a spark plug chamber how do i fix it


REPLACE VALVE COVER GASKET AND O-RINGS AROUND EACH HOLE INSIDE VALVE COVER TO PREVENT OIL FROM ENTERING. LEAKING FROM SEALS AROUND VALVE COVER TO SPARK PLUG PORT GASKET OR O-RING

Jul 13, 2009 | 2002 Nissan Maxima

4 Answers

Oil around spark plugs on 1992 honda accord


Yes the oil can cause the car to lose spark, the oil leak could be caused by the valve cover gaskets around the spark openings, but 9 times out of 10 it is the spark plug tube "O" rings. The top of the valve train comes off of the head, the "O" rings are between the two halves, that will fix the oil leak.

Apr 01, 2009 | 1992 Honda Accord

Not finding what you are looking for?
2000 Harley Davidson FLHRCI Road King Classic Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...