Question about 2006 Hero Honda Passion Plus

1 Answer

Low avrege - 2006 Hero Honda Passion Plus

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 438 Answers

Aditya,

The following need to be checked and corrected:

1. Tyre pressure. Low pressure will cause problem.

2. Clutch adjustment. If over then will lead to excess consumption.

3. Clean carb and well adjusted slow running.

4. If consuming more oil (most likely as your bike is 5 years old) then new oil scrapper ring. To check this insert a finger in the exhaust and if your finger comes out black with oily soot then it is the oilscrapper ring gone.

5. In the carb, check the fuel jet needle. If over then replace.

6. Check if brakes are adjusted properly.

7. Check the pulling power. If low then the rings need to be changed. (read this with 4 above.)

Posted on Mar 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does low oil pressure on 2008 Chevy Impala 3.5 V6 LS


Do you mean what causes low oil pressure? This is a very reliable engine for the most part. If the oil light is on or gauge is reading low, have the oil pressure sensor inspected for failure. These sensors do go bad.

Jan 27, 2016 | Cars & Trucks

1 Answer

Harley trouble codes


There are two types of diagnostic trouble codes (DTCs), current and historic. The Check Engine Lamp will not indicate the existence of historic trouble codes.

1 Current 53 ECM flash error

2 Historic 53 ECM flash error

3 Current 54 ECM EEPROM error

4 Historic 54 ECM EEPROM error

5 Current 63 ECM serial data low

6 Current 63 ECM serial data open/high

7 Current 63 TSSM serial data low

8 Current 63 TSSM serial data open/high

9 Current 61 Loss of TSM/TSSM serial data

10 Current 14 Loss of all ECM serial data (state of health)10 24 Loss of vehicle speed10 33 Loss of vehicle inhibit motion10 43 Loss of powertrain security status

11 Current 33 System relay contacts open

12 Current 33 System relay coil high/shorted

13 Current 33 System relay coil open/low

14 Current 33 System relay contacts closed

15 Current 99 Incorrect password

16 Current 99 Missing password

17 Current 41 CKP sensor intermittent

18 Current 41 CKP sensor synch error

19 Current 11 TP sensor open/low

20 Current 11 TP sensor high

21 Current 12 MAP sensor open/low

22 Current 12 MAP sensor high

23 Current 14 ET sensor voltage low

24 Current 14 ET sensor open/high

25 Current 15 IAT sensor voltage low

26 Current 15 IAT sensor open/high

27 Current 24 Front ignition coil open/low

28 Current 25 Rear ignition coil open/low

29 Current 24 Front ignition coil high/shorted

30 Current 25 Rear ignition coil high/shorted

31 Current 24 Front cylinder combustion intermittent

32 Current 25 Rear cylinder combustion intermittent

33 Current 23 Front injector open/low

34 Current 32 Rear injector open/low

35 Current 23 Front injector high

36 Current 32 Rear injector high

37 Current 16 Battery voltage low

38 Current 16 Battery voltage high

39 Current 43 VSS sensor low

40 Current 43 VSS sensor high

41 Current N/A (no speedo code for this) Check engine light open/low NO CHECK ENGINE LAMP AT KEY ON or CHECK ENGINE LAMP ON CONTINUOUSLY

42 Current N/A (no speedo code for this) Check engine light high NO CHECK ENGINE LAMP AT KEY ON

43 Current 35 Tachometer low

44 Current 35 Tachometer high

45 Current 25 Rear cylinder no combustion

46 Current 24 Front cylinder no combustion

47 Current 34 Loss of idle speed control IDLE AIR CONTROL

48 Current 35 Accelerometer fault

49 Current 34 Starter output high

50 Current 25 Ignition enable output high

51 Current 21 Left turn output fault

52 Current 22 Right turn output fault

53 Current 11 Battery voltage high

54 Current 31 Alarm output low

55 Current 32 Alarm output high

56 Current 41 Ignition switch open/low

57 Historic 63 ECM serial data low

58 Historic 63 ECM serial data open/high

59 Historic 63 TSSM serial data low

60 Historic 63 TSSM serial data open/high

61 Historic 61 Loss of TSM/TSSM serial data

62 Historic 14 Loss of all ECM serial data (state of health)

63 Historic 33 System relay contacts open

64 Historic 33 System relay coil high/shorted

65 Historic 33 System relay coil open/low

66 Historic 33 System relay contacts closed

67 Historic 99 Incorrect password

68 Historic 99 Missing password

69 Historic 41 CKP sensor intermittent

70 Historic 41 CKP sensor synch error

71 Historic 11 TP sensor open/low

72 Historic 11 TP sensor high

73 Historic 12 MAP sensor open/low

74 Historic 12 MAP sensor high

75 Historic 14 ET sensor voltage low

76 Historic 14 ET sensor open/high

77 Historic 15 IAT sensor voltage low

78 Historic 15 IAT sensor open/high

79 Historic 24 Front ignition coil open/low

80 Historic 25 Rear ignition coil open/low

81 Historic 24 Front ignition coil high/shorted

82 Historic 25 Rear ignition coil high/shorted

83 Historic 24 Front cylinder combustion intermittent

84 Historic 25 Rear cylinder combustion intermittent

85 Historic 23 Front injector open/low

86 Historic 32 Rear injector open/low

87 Historic 23 Front injector high

88 Historic 32 Rear injector high

89 Historic 16 Battery voltage low

90 Historic 16 Battery voltage high

91 Historic 43 VSS sensor low

92 Historic 43 VSS sensor high

93 Historic N/A Check engine light open/low NO CHECK ENGINE LAMP AT KEY ON or CHECK ENGINE LAMP ON CONTINUOUSLY

94 Historic N/A Check engine light high NO CHECK ENGINE LAMP AT KEY ON

95 Historic 35 Tachometer low

96 Historic 35 Tachometer high

97 Historic 25 Rear cylinder no combustion

98 Historic 24 Front cylinder no combustion

99 Historic 34 Loss of idle speed control

100 Historic 35 Accelerometer fault

101 Historic 34 Starter output high

102 Historic 25 Ignition enable output high

103 Historic 21 Left turn output fault

104 Historic 22 Right turn output fault

105 Historic 11 Battery voltage high

106 Historic 31 Alarm output low

107 Historic 32 Alarm output high

108 Historic 41 Ignition switch open/low

Aug 11, 2014 | 2000 Harley Davidson FLHRCI Road King...

2 Answers

Low beams dont work on 2000 volvo


It can be faulty low beam lamp or its connection issue for low beam lamps.

There are few solved helps links with proper solution to troubleshoot these issues.I suggest you to refer the links below.Click the link:----
Passenger side low beam out?

http://repairhelpcenter.blogspot.com/2012/01/passenger-side-low-beam-out.html

------------
Low beam HID light goes out? http://schematicsdiagram.blogspot.com/2012/01/low-beam-hid-light-goes-out.html
----------2007 Dodge Caliber: Low Beam Headlight Not working http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html
-------------Chevy Tahoe: Low Beam Lamps are not working? http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html
----------2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working? http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html
--------------2002 Toyota Tacoma: Low Beams not working? http://technoanswers.blogspot.in/2012/04/2002-toyota-tacoma-low-beams-not.html
-----------Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
-----------DRL and Low beams not working? http://schematicsdiagram.blogspot.in/2012/04/drl-and-low-beams-not-working.html
-----------These will help.Thanks.

Nov 25, 2012 | 2003 Volvo S80

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

I am being told i need a harmonic balancer my car is making this clacking noise and my belt tensioner is also loose it seem how big of a job and what should i pay for this.


According to alldata the harmonic balancer is $195 and the labor is .09 hr about 45 to replace it avrege shop rate is abt $65 hr

Feb 23, 2011 | 1995 Pontiac Bonneville

1 Answer

Phone is heating up when charging


chang batter all batter average volt is 3.7v
and carger avreg is 4.2v so chek charger v
by voltmeter

Aug 18, 2009 | LG KP200 Cellular Phone

1 Answer

What is the avrege fuel consumption in aoutomatic gear Mitsubishi super lancer 97


4-Speed Automatic Overdrive: MPG - (City/Highway) 22 / 28, Hope this helps you with the information you asked for.

Jul 11, 2009 | 1997 Mitsubishi Galant

1 Answer

I need to reinstall my driver.


[International Portal Floppy Drive , www.ruanqu.net] is "TEAC low-density jumper floppy drive, SONY low-density jumper floppy drive, YE-DATA low-density jumper floppy drive, EPSON low-density jumper floppy drive, MITSUMI low-density jumper floppy drive, Panasonic low-density jumper floppy drive, Mitsubishi low-density jumper floppy drive, CITIZEN low-density jumper floppy drive, NEC low-density Jumper floppy drive "global distributor. ]

Nov 14, 2007 | Panasonic (r) Ultra-Compact Digital...

Not finding what you are looking for?
2006 Hero Honda Passion Plus Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hero Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Bill Tomayer

Level 2 Expert

45 Answers

Are you a Hero Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...