Question about 1995 kawasaki ZX-9R Ninja

2 Answers

1995 Kawasaki Ninja 250 will only run with the choke on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If it only runs with the choke on that means the bike has a lean condition and needs more fuel (or less air) to idle. on the left side of your bike is an idle adjust screw. It looks like a long thin black tube with a small black knob on the end under the tank. with the bike running and the choke on turn the knob until the bike is idling too high then back off the choke to bring it back down. do this until the choke is off and the bike is running at the proper rpm's.

Posted on Feb 07, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

You have blocked jets in the carbs,,the carbs need to be removed and cleaned.

Posted on Mar 20, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

RaidX
  • 632 Answers

SOURCE: Kawasaki Ninja 250 running problem

This could be due to timing screw being incorrectly set
Locate gold timing screw on the carbrettta turn it clockwise only slightly till bike idles without choke on, Then when choke it on it should idle a touch higher.

Posted on Jun 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2003 ninja 250 the only way it starts most of the time is full choke, after the bike is warm I lower the choke and it does....the I have to let it set for a few minutes to restart it,


Hi, Pirate and the usual suspects are:

1. Fuel cap or fuel tank is not venting properly.

2. Fuel filter clogged.

3. Fuel line pinched or kinked.

4. Float needle and seat sticking.

5. Float level too low.

6. Carburetor bowl vent line clogged/blocked/pinched.

7. Idle adjusting screw set too low.

8. Air/fuel mixture screw set too lean.

9. Idle port, transfer ports, slow air jet clogged.

10. Slow fuel jet clogged.

For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.

05 250 only runs with choke fully engaged

Ninja 250r Wont Rev or run without choke ninjette org

http://mototh.com/files/kawasaki/Ninja_250R/Kawasaki_Ninja_250R_FI-English.pdf

OEM Parts for Kawasaki

Mar 01, 2016 | Motorcycles

1 Answer

Kawasaki Ninja 250 running problem


This could be due to timing screw being incorrectly set
Locate gold timing screw on the carbrettta turn it clockwise only slightly till bike idles without choke on, Then when choke it on it should idle a touch higher.

Jun 21, 2010 | 2008 kawasaki Ninja 250R

1 Answer

Choke problem


Hi, Cnizio if you take your bike to a dealer for a specific issue that costs outrageous amounts of money only to have the same problem 2 days later your situation is not unique unfortunately and it is a double edged sword. First, you suffer the emotional stress and frustration of spending all your hard earned "Drachma" and your bike does not get fixed. Second, comes the realization that not only are the technicians incompetent but also the service manager for not doing anything about it, this isn't rocket science, it's a glorified lawn mower engine with extra cylinders and carburetors sometimes. You need to put an end to all the double talk, dancing around the issue, and a we don't care attitude, but how you ask, very simple you exercise the "nuclear option" go back to the dealer and ask to speak to the owner or general manager if the owner is not there, then with a straight face and polite voice you ask him/her if they can provide you with the name and contact phone number of the person at your brand motorcycle headquarters in your country that can recommend a repair facility that will fix your bike because your local dealer either can not or will not. I guarantee you that is all the grease you need to get someone to light a fire under the proper persons rear end to resolve your issue "toot sweet" For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Choke not working ninjette org
Adjust Ninja 250r Choke
http://www.kawasakimotorcycle.org/forum/mechanics-corner/128752-my-2007-ninja-250-choke-problems.html
http://www.250ninja.net/articles/ninja_250_starting.html
Question about Ninja 250 choke
http://faq.ninja250.org/wiki/What_is_the_correct_way_to_apply_choke_at_startup%3F
http://mototh.com/files/kawasaki/Ninja_250R/Kawasaki_Ninja_250R_FI-English.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 07, 2017 | 2008 kawasaki Ninja 250R

1 Answer

Would the fairing parts of a 2006 kawasaki ninja 250 fit a 2005 kawasaki ninja 250?


Yes I do believe they do. Try going to Powersportseast.com Look in the shopping section on the left of the homepage. You will want to use the parts fische and load the info for your bike. It allows you to see what the dealer parts counter can see. See if this helps. I'm pretty sure the 250 ninja really didn't change until 2008 when it got the BIG overhaul

Nov 02, 2009 | 2008 kawasaki Ninja 250R

1 Answer

Have a 2004 250 Ninja, have cleaned out the tank, cleaned the petcock, new plugs and even took the carbs off and made sure they were clean. Will only run on choke and wont rev up. take the choke off and it...


make sure that you take a peice of a wire wheel off and run it thrugh your jets if that dosent work im not sure if the needle valve has a diapham or not but if it does than u need to check them if none of that works than you need to look at your eletronics

Jun 22, 2009 | kawasaki Ninja 250R Motorcycles

1 Answer

Bike will not start not getting any gas


you need to check your choke prob not a choike issue just you have it open or its stuck but it sounds like a easy fix

Mar 17, 2009 | 1995 kawasaki ZX-6R Ninja

Not finding what you are looking for?
1995 kawasaki ZX-9R Ninja Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...