Question about Triumph Street triple Motorcycles

Open Question

Trying to fit a renntec rack onto my street triple, dont have the fitting instructions

Posted by on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 66 Answers

SOURCE: Which years handlebars will fit onto a 2002 Speed

Any 22mm (7/8") handlebars will fit your Speed Triple - these can be OEM or after-market - lots of options to choose from with different bends to suit your personal comfort. 
Renthal & Rizoma are popular after-market choices, replicating the OEM 'bend' quite closely. 

Posted on Aug 13, 2009

  • 314 Answers

SOURCE: how do the racks fit

Contact the pannier makers and ask them to send you a replacement fitting guide.for your type ,or contact your local honda dealer ,they may be able to help you .

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fitting hugger 2013 street triple

Easy - follow instructions - do not tear the brake lines, put copper grease on all bolt/screws you use, do not overtighten them. if you have to remove chain guard keep it for when you sell.

Dec 11, 2013 | Triumph Street triple Motorcycles

1 Answer

Rack and pinion? have play in wheel no sign of leaks new power steering pump installed

Hi Gunny, If your vehicle is fitted with rack and pinion steering also check the rack ends for play. The rack ends are the rods which the tie rod ends screw onto. The other end fits onto the rack of the rack and pinion. To work on those you will need to remove the rubber boots and loosen the locking washer, they can then be loosened with a wrench. If they are worn the play will be evident in the steering. When replacing them also replace the rubber boots. If the boots are worn and road grime and dust enters, you will see leakage from the rack and pinion in the near future. I always thought the Dakota was fitted with a steering box? Regards John

Jun 24, 2012 | 1990 Dodge Dakota

1 Answer

Instruction renntec rack

Hi, Justinzam242 you made need a special fitting kit from RennTec for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Magento Commerce
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha

May 23, 2012 | 2008 Yamaha YZF-R6

1 Answer

Rack and pinion steering lines on 98 ford explorer pressure line and return line witch one on top

the return line is only held on by clamps at both ends or one end at the rack assembly,even though the fitting it connects to may have a nut fitting that threads into the rack.the pressure line always has fittings at both ends that can only be fastened onto the pump and rack by a wrench(or line tool).

Mar 24, 2011 | Ford Explorer Cars & Trucks

1 Answer

Power steering fluid is leaking - on which side of the car is the rack and pinion when sitting in the drivers seat.

Hi, Aillathu,
The rack and pinion unit fits across from left to right....It is fitted onto the cross member....The pinion is fitted into the housing at almost right angles to the rack....The rack and pinion is a very positive steeling method, giving excellent response and usually good road feel....The unit consists of the rack which is fitted into the housing and joins the left and right wheels....and the pinion at more or less right angles to the rack...A leakage usually indicates worn oil seals which become damaged when a protective boots is broken....(The protective covers fitting onto the end of the rack housing)....The pinion is the part which attaches to the Steering column and the steering wheel....
If you're intending to do this job yourself, remember to pin punch 'match marks' onto the steering wheel and the top of the column before removing the nut. Next disconnect the steering fluid lines and drain the fluid into a container....(Don't forget to use goggles)
Jack the vehicle up and remove the front wheels....Turn the steering so that the tie rod ends can be loosened and removed from the housings (this will require a taper loosening tool)....removing them can also be achieved with a large hammer, but this method is not recommended!....Set the steering at straight ahead....Remove the joint attaching the pinion to the steering column....Once removed loosen the saddles holding the assembly onto the cross member and remove from the vehicle. Replacement of the seals is not as easy as removing the unit from the car, as the job requires special adjustments made to the unit and a very clean working area. Before you do this job please make sure that the leakage is from the rack and pinion and not on one of the hoses....
Regards Johngee10

Feb 06, 2011 | Jaguar XJ6 Cars & Trucks

1 Answer

I have a spoiler and i can not get the bike rack to fit on without the weight of the rack resting on the spoiler, what to do?

The spoiler on a street car is the undeniable victory of form over function.

This rack might work depending on how high the spoiler is. I had a '90 Eagle Talon with a wing back in the day and I just flipped the whole rack over so the curve was over the spoiler. Later I just broke down and got a proper Thule roof rack. Function won.


I contacted Bell Sports and complained about the lack of downloadable manuals. They said they are in the process of developing the website which will provide them.

It has some basic stuff about helmets and tire changing right now. Stay tuned and check it once in a while.

In the meantime, they sent me the manual for the Doubleback/Tripleback Car Rack in English since that was the one I used as an example.

If you post your email to this solution I will be notified and will send it to you.

May 30, 2010 | Carrier Bell Tripleback Trunk 3 Bike ...

1 Answer

Which years handlebars will fit onto a 2002 Speed Triple?

Any 22mm (7/8") handlebars will fit your Speed Triple - these can be OEM or after-market - lots of options to choose from with different bends to suit your personal comfort. 
Renthal & Rizoma are popular after-market choices, replicating the OEM 'bend' quite closely. 

Jul 10, 2009 | 2002 Triumph Speed triple

1 Answer

Front wheel axle pinch bolt torque setting

tight is right. just do it up tight and re-check it after a ride or two. it'll be fine. dont go at it like an animal though, i have never torqued wheel nuts and never had any trouble. if you dont trust your judgement ask the bike shop who is fitting your new tyre and balancing the wheel

Apr 01, 2009 | 2008 Triumph Street triple

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides