Question about 1987 Yamaha FZX 750

1 Answer

What is the fuel pump psi on a 87 fzx 750? - 1987 Yamaha FZX 750

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,801 Answers

Hi, Tom_sher884 that would be 2.28 psi. for this scenario, you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "Free" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Motormuseum voor klassieke motoren MotoBase
http://www.fz750.net/fz750com/engine.html
Yamaha FZ FZX750 Service Manual 1986 1987 Download Manuals Technical $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Posted on May 24, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

co7196
  • 3433 Answers

SOURCE: Yamaha 1987 FZX 750 fuel pump problem.

Most pumps like this work on pressure drop. When the floats open the pump loses resistance pressure and resumes pumping until it feels pressure again.

Posted on May 21, 2009

brian_carr60
  • 63 Answers

SOURCE: how to change seals on slave clutch sylinder?,

Better, get a new one. If you must remove slave cylinder, take out internal circlip, remove seals, wash in carbontetrachloride or similar, air dry, refit new seal kit lubricated with dot 40 and slide home, refit circlip fill and bleed air, topup, simple yea

Posted on Sep 14, 2009

  • 191 Answers

SOURCE: service manual of yamaha FZX

If you need the factory service manual, here is Yamaha's site for their publications...just use the drop down menus to get your model
http://www.yamahapubs.com/index.do?pg=search&category=3

Posted on Mar 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fzx 750 is sputtering when throttle opened. Acceleration slow.


Hi, Jim and the usual suspects are:
1. Throttle cables misaligned or misrouted.
2. Damaged or restricted fuel tank venting system.
3. Intake system air leak.
4. Vacuum piston malfunction.
5. Pinholes or torn diaphragm.
6. Accelerator pump leaking or no output.
7. Plugged bowl vent or overflow.
8. Fuel level in bowl too low.
9. Restricted fuel supply passages.
10. Plugged jets or passages.
11. Worn or damaged needle or needle jet.
12. The enrichner valve/choke not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.starbikeforums.com/forums/49-v-star/9084-v-star-acting-very-sluggish-sputtering.html
sputtering upon acceleration electrical or fuel
Help engine sputters as increased throttle
Yamaha FZ FZX750 Service Manual 1986 1987 Download Manuals Technical $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Aug 04, 2017 | 1993 Yamaha FZX 750

1 Answer

Fazer owners club


You do not need to regulate the fuel, the carbs do that, the pump just supplies fuel to them.There is no fuel regulator.

Jun 30, 2014 | 1987 Yamaha FZX 750

1 Answer

1987 fzx 700 will turn over but not start. carbs are clean and adjusted. runs great when you bump start it. Fuel pump comes on even after engine is warmed up. Not sure what else to check.


chec electrical 1st its the weakest link--batt may not be at 12.6v-needed for a coil ign--corrosion/connections cud be bad like a ground-plugs-cables-ignition module may be worn---u need a fuel pressure test to confirm a bad pump--getta repair manual or library has troublshootn guides

Apr 11, 2014 | 1987 Yamaha FZX 750

1 Answer

1987 fzx will turn over but not start


Check battery charge level and connections.

Apr 11, 2014 | 1987 Yamaha FZX 750

1 Answer

How to find the construction year of my yamaha fzx 750 ?


The bike was only made for two years 1986-87. Most if not all parts are interchangeable. There was also a 700 made for the US over the same years and those parts are mostly compatible as well.

Oct 01, 2012 | Yamaha Motorcycles

1 Answer

I just bought a 1988 yamaha virago 750 and it was stored outside covered for over 4 yrs.Cleaned carbs and gas tank,put new plugs in,new fuel lines and checked fuel filter is ok. I have spark,compression...


good start on cleaning things BUT, you should replace pump. the pump will have the same gum **** the tank did. you can unhook lines and turn over to see how much fuel you get

Jun 14, 2011 | 1988 Yamaha FZX 750

1 Answer

1989 Yamaha FZX 750 will not start


Hi, Burton_jake and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Steps to Take When Your Motorcycle Won Start Dennis Kirk Powersports Blog
How to Start Yamaha after it been left for years in the garden
Yamaha FZ FZX750 Service Manual 1986 1987 Download Manuals Technical $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Feb 14, 2010 | 1989 Yamaha FZX 750

1 Answer

Yamaha 1987 FZX 750 fuel pump problem. I have new fuel pump and fuel pump relay but the pump is still not working. The pump worked for a short while but then it stopped before even all carburators were...


Most pumps like this work on pressure drop. When the floats open the pump loses resistance pressure and resumes pumping until it feels pressure again.

May 19, 2009 | 1987 Yamaha FZX 750

1 Answer

1990 Yamaha FZX 750 poor MPG


Hi Kerry and the usual suspects are:
1. Excessive enrichner use.
2. High-speed riding style.
3. Idle speed improperly adjusted.
4. Dirty air cleaner element (may also affect idle speed).
5. Vacuum piston assembly malfunction.
6. Excessive accelerator pump output.
7. Plugged or restricted bowl vent.
8. Fuel level too high.
9. Loose jets.
10. Worn or damaged needle or needle jet.
11. Enrichner valves not seated or leaking.
12. Plugged air jets or passages.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha FZX 700 FAZER MPG
ViragoTechForum com
Yamaha FZ FZX750 Service Manual 1986 1987 Download Manuals Technical $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

May 14, 2009 | 1989 Yamaha FZX 750

Not finding what you are looking for?
1987 Yamaha FZX 750 Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...