Question about 2002 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

2002 ultra classic starts then stalls, cleared trouble codes with code reader. code p-1009 still present =''incorrect password''. tried e.c.m and security fuse removal, to reboot for 10 min then reinstall fuses. plus passcode learning of and tssm configuring. problem still present.looking for solution to problem. thank you. rsp houston,tex.

Posted by on

  • russellsteve Mar 21, 2011

    from: R.S.P Houston,Texas, performed action " setting TSM/TSSM and ECM Passcode or Password without Scanalyzer'' for E.F.I Harley Davidson. Action no# 1- Set Run/Off switch to run. no# 2-Turn IGN key ON. no# 3- Press starter button 1 time. " vehicle starts and stalls'. no# 4- Wait10 seconds, ''security lamp illuminates'' ECM enters password learing mode. no#5-watch lamp for 10 minutes and wait for it to turn OFF, when it Quickly turn IGN key Off-On and repeat two more times. be sure on the third cycle or last passcode mode. turn IGN key Off then ON and watch for lamp to go out, then turn IGN off for 15 seconds before turning IGN back ON. This action may take up to 30 plus mins. battery charger needs to be used,to keep at least 10 volts to battery during this action. it took me at least two tries to get it done, but finely it worked, and the bike started right up. hopes this helps someone who has, the '' Starts then stalls'' DTC- 1009. rsp houston,texas.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Harley Davidson Master
  • 40,868 Answers

Hi Russellsteve, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day. Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Posted on Jun 21, 2015

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: 2004 Ultra Classic

also just a guess but try New spark plugs,i have had that problem and it is worth a try

Posted on Jan 11, 2009

  • 13 Answers

SOURCE: where are the fuses located on a 2005 ultra

Under the left side cover right below the seat.

Posted on Mar 22, 2009

  • 80 Answers

SOURCE: removing harley davidson ultra classic gas tank

Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.

0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.

All in all a pretty easy (but possibloy messy) job.

Posted on Jun 06, 2009

  • 2 Answers

SOURCE: trouble codes blinks 9 times

check the wiring under the bike. the rectifier/regulator are in the front of motor. if you cut these wires the bike will not start. have seen similar with bad stator and r/r. battery will not charge when connected to bike. hope this helps.

Posted on Jun 20, 2009

  • 69 Answers

SOURCE: 2002 harley davidson ultra classic setting the clock

Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Code reader

which code reader?Here is code reader you can check.

Jul 25, 2013 | 2001 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Harley p2176 solution

DTC P2176 = Throttle Acuation Control: closed position not learned (2008-2009 models)

Remove air cleaner and check Throttle Body inlet for debris or mechanical interference restricting movement of throttle plate.

If none is present, replace Induction Module.

If present, clear obstruction, clear code from memory.
Start engine, operate throttle several times.

If code does not come back, system OK.

If code reappears, replace Induction Module.

Feb 15, 2013 | 2008 Harley Davidson FLHTCU Ultra Classic...

1 Answer


Hi Richard, for more information about your question please visit the website below. Good luck and have nice day.
Harley Diagnostic Codes 04 to Present

Sep 30, 2012 | 2004 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Is there a way to clear codes with out a code reader it a 1999 electra glide

You should be able to disconnect the battery for half a minute or so and it should erase all codes. Be prepared to see the same code come up after you start it if you did not fix the problem

Jul 18, 2011 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer


Hi Larry, for more information about your question please visit the websites below. Good luck and have nice day.
Harley Diagnostic Codes 04 to Present

Feb 06, 2011 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

HD ULTRA CLASSIC 2009, fault code d1A9. Check

Hi Oldsquid76, for more information about your question please visit the websites below. Good luck and have nice day.
Harley Diagnostic Codes 04 to Present

Jul 29, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

I have a 02 ultra the trouble codes are flashing

This is from Not good news. Here is what I found for older Delphi FI models 2000-2003.

34 Current 32 Rear injector open/low
43 Current 35 Tachometer low
63 Historic 14 Loss of all ECM serial data (state of health)

You should buy a Clymer manual for your bike, unless you have the manual from the dealer and check that. Hope this helps.

Oct 05, 2009 | 2002 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
2002 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers


Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides