Question about 2002 Harley Davidson FLHT Electra Glide Standard

1 Answer

02 flht should oil be checked on the jiffy stand(kick stand) or on level?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Since the oil is in the tank beneath the transmission, check the oil while the bike is on the jiffy stand.

Good Luck
Steve

Posted on Mar 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to attach kick stand spring on 2006 street glide


With the full weight of the motorcycle resting on the jiffy or side stand when it is placed in the full forward and down position it will lock into this position when the bike is leaned over the left side. If it is not in the fully down and forward position and on a flat/level and firm/solid surface when it is leaned over to the left side the bike may fall down.



To Remove the Jiffy Stand

WWAARRNNININGG

Block and support the motorcycle under frame to be sure that it is securely upright and level and so that the jiffy stand can be moved throughout its full range of travel and so that it will not fall down or onto the repair person when the jiffy stand is removed.

Then move the jiffy stand to the retracted i.e. up position and remove the ****** nut and leg stop from the threaded end of the jiffy stand leg and then move the jiffy stand leg to the full forward position which is the full down position and grasp the end of the jiffy stand spring as close to the frame tube as possible, and then twist and turn the end with needle nose pliers to unhook it from the frame hole. THEN remove the jiffy stand leg from its bracket, inspect the entire jiffy stand assembly for worn or damaged parts and replace them as found necessary.



To Install the Jiffy Stand



First lubricate the jiffy stand leg with an Aerosol Anti-Seize Lubricant but only in the area of the jiffy stand leg part that rotates within the bracket. THEN insert the threaded end of the jiffy stand up through the bottom of the bracket and with the jiffy stand in the full forward position, partially install the spring end into the frame hole and with a rap to the spring with a rubber mallet fully seat it in its hole. Be careful to insert the end of the spring into the hole at the front of the jiffy stand leg piece in front of the jiffy stand leg piece weldment because if it is inserted from the rear of the hole in the leg piece the coil of the spring will interfere with and rub on the leg piece when the jiffy stand is used and if it is installed incorrectly over time it will wear and the motorcycle could fall over due to this wear. THEN while holding the jiffy stand leg at the full forward position, install the leg stop over the threaded end with the stamped side down, install the ****** nut and tighten it to 43-53 ft-lbs which is 58-72 Nm. NOW verify that the longer side of the leg stop faces towards the rear of the motorcycle, extend and retract the jiffy stand leg several times to verify that it operates properly, freely moving to both the full up and the full down positions with no spring or other interference or contact and verify that the rubber stop is correctly in place on the jiffy stand prong because without the rubber stop correctly in place the stand will make improper contact with the lower frame tube when the jiffy stand is retracted and will then likely chip and/or nick the powder coat. AND, of course if the rubber stop is deteriorated or missing. Replace it with a new one. FINALLY carefully remove the support blocking from beneath the motorcycle frame and let the motorcycle rest on the fully extended jiffy stand leg.

Sep 15, 2014 | Motorcycles

1 Answer

How do I check the oil on a 2000 harley davidson dyna glide?


For cold engine oil level inspection have the motorcycle leaning on its jiffy stand on level ground, pull out the dipstick which is right behind the cam cover and the oil should register between the add and full marks DO NOT add oil if it is at the halfway point from add to full marks on the dipstick. Only add oil when cold if it VERY low. THE warm the engine to operating temperature and then let it idle on the jiffy stand for two minutes on level ground and turn the engine off and check the oil. Add oil only to just below the FULL mark. DO NOT fell over the FULL mark or you may encounter all sorts of problems.

Apr 29, 2014 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...

1 Answer

How to check engine oil on a 2000 dyna glide?


For cold engine oil level inspection have the motorcycle leaning on its jiffy stand on level ground, pull out the dipstick which is right behind the cam cover and the oil should register between the add and full marks DO NOT add oil if it is at the halfway point from add to full marks on the dipstick. Only add oil when cold if it VERY low. THE warm the engine to operating temperature and then let it idle on the jiffy stand for two minutes on level ground and turn the engine off and check the oil. Add oil only to just below the FULL mark. DO NOT fell over the FULL mark or you may encounter all sorts of problems.

Apr 29, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

How do you check oil on a 98 dyna harley davidson?


For cold engine oil level inspection have the motorcycle leaning on its jiffy stand on level ground, pull out the dipstick which is right behind the cam cover and the oil should register between the add and full marks DO NOT add oil if it is at the halfway point from add to full marks on the dipstick. Only add oil when cold if it VERY low. THE warm the engine to operating temperature and then let it idle on the jiffy stand for two minutes on level ground and turn the engine off and check the oil. Add oil only to just below the FULL mark. DO NOT fell over the FULL mark or you may encounter all sorts of problems.

Apr 28, 2014 | 2000 Harley Davidson FXD Dyna Super Glide

1 Answer

How to check the oil on a 2001 dyna


Which of the three oils??? For engine :

For cold engine oil level inspection have the motorcycle leaning on its jiffy stand on level ground, pull out the dipstick which is right behind the cam cover and the oil should register between the add and full marks DO NOT add oil if it is at the halfway point from add to full marks on the dipstick. Only add oil when cold if it VERY low. THE warm the engine to operating temperature and then let it idle on the jiffy stand for two minutes on level ground and turn the engine off and check the oil. Add oil only to just below the FULL mark. DO NOT fell over the FULL mark or you may encounter all sorts of problems.

Apr 22, 2014 | 2001 Harley Davidson FXDL Dyna Low Rider

1 Answer

Check oil level 1999 flht


I just slide a 2x4 under the kick stand it works great !!

Apr 15, 2014 | 2004 Harley Davidson FLHTC - FLHTCI...

1 Answer

How to check oil


Hi Anonymous, always check engine oil hot, let idle for 2 minutes on jiffy stand, turn off engine and stand motorcycle upright, pull out dip stick and check for oil level at upper most top line. Add oil if necessary, drain if over full. Good luck

Apr 10, 2014 | 2003 Harley Davidson FLSTFI Fat Boy

1 Answer

Do I check oil in 2007 heritage softail on jiffy stand or straight up?


Hi Anonymous, the Harley Bible says, engine should be at normal operating tempurature, let idle on jiffy stand for two minutes. Shut off engine and hold bike straight up, correct engine oil level will be at the top full mark. Do not overfill oil tank as this will cause engine breathing issues. Good luck

Mar 22, 2013 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

After a ride some oil blows out of filler tube


Check your oil level
run bike on a short run to warm it up then on LEVEL ground put it on the jiffy stand and check your level, many times if it is over filled the problem you are describing will occur

Aug 23, 2011 | Harley Davidson FLSTC Heritage Softail...

Not finding what you are looking for?
2002 Harley Davidson FLHT Electra Glide Standard Logo

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...