Question about 2002 Honda CR 125 R

1 Answer

Grandson has 1992 cr 125 fuel overflowsthrough carb, had carb off and float appears ok

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check and clean or replace the float needle assembly,set your float height ,check your throttle cable and make sure it has a little slack.

Posted on Mar 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 cr125 stored for 2 years with no problems when stored. Changed out the fuel, gear oil, and cleaned carb recently. got bike to fire up no problem, but now fuel is blowing out my exhaust. what could it...


Replace the needle and seat in the float chamber. You can try cleaning the carb again this time using lacquer thinners, the only stuff that really cleans the gum that gas turns into when left standing, but consider a new carb kit.

Apr 09, 2011 | 2002 Honda CR 125 R

2 Answers

I have a cr 125 2003 model , my bike was running and starting fine but today it cut out t, the spark plug is firing there is fuel coming threw but it is not firing up ,there apperes to be flooded as the...


HI, IF IT IS FLOODED, TURN OF THE FUEL AND OPEN THE THROTTLE FULLY AND KEEP AT THIS POSITION WITHOUT THE CHOKE,KICK REPEATINGLY AND IT MAY FIRE EVENTUALY,

RREMEMBER THAT THE CHOKE INITIALY FLOODS THE ENGINE FOR COLD STARTING, SO USING THE CHOKE WHEN ALLREADY FLOODED WILL WORSEN THINGS,

YOU COULD PROBABLY REMOVE THE EXHAUST TO DISPENSE THE FUEL QUICKER AND PUT IN A CLEAN PLUG, I WOULD DO THIS BEFORE I STRIP DOWN THE CARB TO SEE IF THE PROBLEM CLEARS, AS THE BIKE WAS PREVIOUSLY RUNNING IT SEEMS ODD TO START MAKING ADDJUSTMENTS

Feb 27, 2011 | 2003 Honda CR 125 R

1 Answer

Having trouble getting my 1997 honda cr 125 to start have tryed new spark plug n there is spark the motor is not ceased as far as i no have tryed roll startin it but get nothing at all there is no responce...


If you remove the spark plug, attach the plug wire to it, and see a spark when you hold the base of the plug against the motor and kick the starter then the problem must be fuel. Remove the fuel line from the carburetor to make sure that fuel is flowing freely from the gas tank. If that is ok, remove the float bowl from the carb to make sure it has enough gasoline in it to lift the floats high enough to shut off the fuel flow valve. Is the gasoline fairly fresh, by the way? If the gas is ok, and there is enough gas in the bowl to lift the floats, then there must be an obstruction in one of the fuel passages in the carb, or one of the jets is clogged.
One thing you could do before all this, to confirm that fuel is the problem, is to squirt a little gasoline into the carb and then try starting the bike. It should fire momentarily. If it doesn't then you are not getting a strong spark or the timing is off. Have you done anything to the motor that might have messed up the timing?

Dec 19, 2010 | Honda CR 125 R Motorcycles

1 Answer

Honda cr 125 new top end rebuild started ok but when switched of petrol leaks out of overflow tube every couple of minuates


sounds like the float in the carb is stuck or set to the wrong hight give the carb a few taps with a screwdriver if that dont work take the carb off and check the float and needle.

Oct 08, 2009 | 2002 Honda CR 125 R

1 Answer

Honda CRF 100F has spark, I changed the tank fuel filter, and it will crank over with carb cleaner but won't stay running...pulling carb off to clean right now...any other ideas? also how do you adjust the...


hi mate you will see a screw pocking out the carb screw it in 1/4 of a turn and start it this is the idle screw which should bring the revs up a little good luck

Jul 07, 2009 | 2002 Honda CR 125 R

1 Answer

98 cr 125 has spark and gas but wont start. seems to be flooding the engine. gas is building up in the pipe. the carb doesn't seem to be controlling the flow of gas right


you should open the carb and check the floaters and the pin they control.Then adjust the float height and test it before you put it on the bike.Empty the gas from the engine 'cause it will damage the crankshaft's oil seals.

Jun 28, 2009 | 2002 Honda CR 125 R

1 Answer

93 honda cr 125 r has no power


i bet it is the float needle check to see if it has dropped down to the last notch. i think there are three they regulate the amount of gas that goes to the engine its in the carb and easy to check.just unscrew the top piece and its right there.

Jun 06, 2009 | 2005 Honda CR 125 R

1 Answer

My 2002 Cr 80 big wheel is continually flooded. Spark plug appears to be too wet. Is it a carb problem or more complicated? I've turned off the gas and choke and tried to dry the head out by bumping it...


it is eather the spark or your floats clean the plugs and ground them to the heads and kick it over if you get a good spark then its your floats.

Jun 03, 2009 | 2002 Honda CR 125 R

2 Answers

1998/99 kx 125 fuel leaking from carb outlet at bottom


sounds like the needle and seat may be the problem

Apr 15, 2009 | 2003 kawasaki KX 125

2 Answers

Cr 500 carburator


This sounds to me like a carb float being stuck open. Turn off the gas and drain the offending carb. Next, turn the gas back on and sharply tap the float bowl with the plastic handle of a screwdriver as the fuel bowl refills. The goal here is to vibrate the float to free it up. If doing this process a couple of times does not free the float I would remove the carb and clean it with a spray carb cleaner. Clean the air filter then re-mount carb. Next Remove the water trap bowl at the bottom of the petcock, (gas valve). Dump it, clean it and re-mount it, ( not all bikes have a water trap bowl ). Install an inline fuel filter.

Please rate this solution. Thanks!

Mar 28, 2009 | 2002 Honda CR 125 R

Not finding what you are looking for?
2002 Honda CR 125 R Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...