Question about Harley Davidson FXSTB Night Train Motorcycles

1 Answer

Whats the easiest way to change the oil on a 2006 nite train

Posted by on

  • A Miller Mar 13, 2011

    The easiest way to do this is have it done by your motorcycle shop. It is just a few bucks and they get rid of the dirty oil.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I would start with getting the the oil filter drain from Harley Davidson Part Number 63794-10 $19.95. It will save you a lot of clean up. You will also need either a HD oil filter wrench or a special after market one. This is to prevent hitting the sensor that is located close to the oil filter and damaging it. If you can't get the oil filter drain from HD then a long piece of hard plastic of some kind can do the trick. Place it all the way under the oil filter and ensure there is enough coming out past the left side of the engine to drain the oil into a container. Poke a hole in the top of the filter and another hole in the bottom to drain the filter before removing it. Again this will prevent a lot of mess. It gets pretty easy after that, I found the new style plastic coffee containers will fit under the bike perfectly and will hold all the oil the drains from the engine. If you are unclear where your oil drain plug is at this link may help you out. http://answers.yahoo.com/question/index?qid=20090913173529AAike4V

Posted on Mar 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Hero Honda Passion Plus fork oil capacity


Hi, Sanjay for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Hero Honda Splendor fork oil change
Hero honda passion plus user manual pdf
Hero Honda Training Film mp4
http://www.xbhp.com/talkies/help-me/15597-passion-carb-tuning.html
Hero Splendor Service Manual

Mar 18, 2017 | 2006 Hero Honda Passion Plus

1 Answer

Why is engine clacking and clanging on start up and hard to start but sounds perfect after started?


Sounds like lack of oil in the top end, IE: lifters valve train. Checked your oil? Using what's recommended for that engine?

Nov 29, 2015 | 2006 Suzuki Boulevard C50

1 Answer

Loud valve train


That or very worn cam bearings. Or both.
Usually if the oil pump is failing you will loose oil pressure as the engine warms up. Noise at first is excessive wear in the engine parts.
The noise goes away as soon as oil reaches the worn parts.

Jan 30, 2014 | 2006 Subaru B9 Tribeca

1 Answer

I have a 97 cutlass 3100 v6 yesterday the lifters started getting real loud losing power then heated up a bit not bad then staled cause it got real loud wouldnt start back up that nite started up real loud...


the camshaft on this model has sheared in the middle. very common on this model. this car has an interference engine and so the valves have been bent the pistons have been scarred and the engine is toast

Oct 14, 2013 | Chevrolet Malibu Cars & Trucks

1 Answer

Need 2 no what po11 code is


it is a cam shaft timing code try a fresh oil change and if oil changes are up to date i think that would be covered by the power train warr

Aug 21, 2012 | 2006 Chevrolet HHR

1 Answer

Back firing and sputtering after oil change and spark plug replacement, oil was overfill, replace the air filter air lines gasket. This is a Harley Night train 2006, 88ci, fuel injected


Hi Lorabell777, take it back to the dealer and demand satisfaction politely and you want it fixed for free since you already paid big bucks for the practice repair. If they give you any static ask the store manager for the Motor Company's customer service phone number so you can ask them why your dealer won;t waranty their work in a timely manner. Good luck and have nice day.

Jan 26, 2012 | 2006 Harley Davidson FXSTBI Night Train

2 Answers

I have replaced tcu still will not change gears. 3000sl gt 1992. what could it be


older cars had a vacuum that changed the gears newer cars have a electric actuator mounted on the training i forget the exact name of the part but if that thing isnt the problem then its probably the bands in training slipping

Sep 09, 2009 | 1992 Mitsubishi 3000GT

2 Answers

No problem, just question on oil change,


I would recommend that you change your oil every 3,000 mile or 3 months which ever come first. This just help you keep a cleaner engine and keeps oil at Peak performance and provide excellent protection against sludge which developes with lack of oil change. Once a year seems too long for an oil change. However between oil changes you can add oil if needed. Good luck and thanks for using FIX YA

Jan 26, 2009 | 2006 Buick Lucerne

1 Answer

Engine oil


Hello ,

Thank you folks, but my problem is already fix it - I'll change the engine oil like in

the A program from my Chrysler owner manual .

This does it mean at max. 6 months or max 7500 miles ...




Shurehand


PS : Probably the Chrysler LLC it must be more carefully with his international dealers training's ..

Aug 02, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...