Question about KTM 505 SX-F Motorcycles

Open Question

My ktm 505 sxf was running fine then it was washed and left for a few days.i went to start it and it was runnig rough then cut out. And it wont start it keeps splurting and poping.what could be up

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: 2007 ktm 450 sxf timing

i could tell ya easly or u could just go to dirtrider or transworldmx websites and they'll give u detailed pics so itl be easy

Posted on Feb 17, 2009

  • 14 Answers

SOURCE: ktm 250 sxf 2008 backfires

go on google check the air mixture and altar the air screw on the carb to wot u find on the net easy job thers only 2 screws on the carb

Posted on May 20, 2009

  • 1 Answer

SOURCE: how much oil do you put in a 2006 ktm 250 sxf with

You can download an owner's manual for free here

http://www.ktm.co.uk/250-SX-F.28.19.html?&detailview=4&cHash=dcbf8829e1

Posted on May 23, 2009

  • 3567 Answers

SOURCE: i have an 08 ktm sxf 450 and we replaced all the

KTM is not my specialty but every bike I have ever worked on fits to the crankshaft by indexing on a pin or woodruff key. If there is a drill hole or a half mood divot on the crankshaft and the flywheel is loose when mounted, you don't have the pin or woodruff key installed.
1821053.gif

Posted on Oct 27, 2009

TerryTown
  • 292 Answers

SOURCE: i need a ktm 450 sxf service manual, can you email

Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

Try these:

KTM Owners Manual

http://www.ktmusa.com/download.php?dataID=8101G9_OM_EN.pdf


KTM Service Manual

http://www.ktmcyclehutt.com/ktm-parts/ktm-parts-search.php?ktm-motorcycle-parts=Repair-Manuals&year=2007&ktm-model=sxf-450&fitment=bigbikes-all


KTM Repair Manuals Order Site

http://www.repairmanual.com/KTM.html



http://www.tryvod.com/search/ktm-2008-450-xcf-owners-manual-download.html



http://www.pdf-manual.com/user-guide-instruction-owner-manual-ktm-450-exc-2008-17793.html


http://www.pdf-manual.com/telechargement2.php?id=17793


http://www.mydrive.ch/browse#/


Manuals General:

http://www.dansmc.com/shopmanual2.htm


Other Manuals Sites:
http://www.fixya.com/motorcycles/ktm

Posted on Oct 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put a 2011 ktm 250sx rear fender on?


Hi, Dylan for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your KTM, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Back fender instal procedure KTM 530 exc
New Acerbis Plastics Install on KTM 300 XC Time Lapse Video
KTM 250 sxf 2016 Repair Manual
http://www.partsfish.com/page/oem-parts-for-ktm
KTM 250 SX 2010 Owner Manual

Mar 28, 2017 | 2011 KTM 250 SXF

1 Answer

2011 KTM 250 SXF will not idle


Hi, Anonymous if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will idle and run poorly, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition.
1. If your battery was 2-3 years old when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging remove the leads and let the battery sit for a couple of hours then check the battery voltage with a volt meter, you should have 12.5 volts or better, any readings in the 11 volt range you need to do a proper load test on the battery and replace as necessary, any readings in the 10 volt range you have a dead cell and replace the battery.
4. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
5. Remove your air cleaner and clean and re-oil per Mfg. specifications.
6. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
7. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
8. Replace spark plug with a new one and check for spark.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
250 sxf wont idle 250 350 450 505 SX XC 4 Strokes
2012 KTM Fuel Injection Filter Discussion Enduro360 com
http://www.ktmforums.com/forums/two-strokes/5351-help-ktm440-wont-idle.html
https://drive.google.com/file/d/0B2-8B_LViIenQ2xmdkZFUEJiaHc/view

May 06, 2016 | 2011 KTM 250 SXF

1 Answer

Hiya just a quick question on what coolant to put in my ktm 250 sxf Cheers????


Hi, Mally sorry you can't find the first and best tool you ever bought for your KTM despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Coolant
Flushing the coolant 250 350 450 505 SX XC 4 Strokes
KTM Service Repair Manuals Kristofsx com
KTM 250 SX Owner Manual

May 01, 2016 | KTM Motorcycles

1 Answer

Clutch does not engage well, especially when cold. First shift into gear will always stall motor.


to me this seems a case of many things not 100% set up properly.

big singles do burn a lot of oil, so either its low or just the wrong viscosity, check with a KTM forum as a lot of users will have already had this problem and rectified it.


but the first thing i'd check first is: Idle speed (if its FI then shouldnt be a problem) valve clearances and it also depends on whether you have any mods?



a race spec pipe will always cause issues starting cold.

Sep 27, 2012 | 2008 KTM 505 SX-F

1 Answer

2011 ktm250 sxf wont start


i have a 2009 ktm 450 sxf and was riding yesterday and it stalled out when i switched to fourth gear and wont start back. battery is good and when i hit the e start it just clicks once, and it wont roll start either. any suggestions? could it be the switch under the tank? PLEASE HELP!

Sep 24, 2012 | 2008 KTM 250 SX-F

1 Answer

Starting Problems Ktm 450 sxf


It's your batt....... simple. The last three replys are the stupidest things I have ever heard!!.

Mar 21, 2012 | 2011 KTM 450 SXF

1 Answer

When I stall my ktm 450 sxf it wont fire again however if u turn it off at the ignition it starts straight away?? What could this be?


Your gonna seize your engine if you keep stalling it, very bad. Also its a switch that incase you crash and the engine stalls it will cut power to the coils located under the tank, to prevent any kind of electrical fire. just don't keep stallin it and let off the clutch just a little slower.

Oct 04, 2010 | 2008 KTM 450 SX-F

1 Answer

Problem starting ktm 2006 sxf 250


check inlet valve clearances. they close up making it hard to start exactly as you described. titanium valve coatings wear and ressesion happens quickly,a clean air filter must be maintained to prevent contaniments wearing valve coatings.

Jun 22, 2009 | 2006 KTM 250 SX-F

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...