Question about 1994 Suzuki RF 400 R

Open Question

Hello i have a 95 suzuki rf 400 and i need to know what order the ht leads fit to the plugs,can anyone help please?????

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Benimur
  • 6966 Answers

SOURCE: suzuki gsxr 400 gk76 which ht leads go where from coils

Hi and welcome to FixYa,

Almost always on Suzuki 4 cylinders, the left (when seated) igntion coil supplies cylinders 1 & 4 while the right ignition coil supples 2 & 3.

Good luck and thank you for asking FixYa.

Posted on Aug 15, 2009

Ad
  • 3567 Answers

SOURCE: what order do the ht leads go on a gsxr 400?

This should help >
3996842.gif

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In what order do the ht leads fit to the plugs?


If you go to the following web site, it will give you a diagram of your coils and HT leads and a good idea of how they fit.
http://www.cmsnl.com/suzuki-gsf400-bandit-1991-1993-usa_model16065/partslist/92023.html

Jul 06, 2015 | 1991 Suzuki GSF 250 Bandit

1 Answer

95 jag 4.0 no spark, but power to both coil wires , plugs are good


check the distributor cap and rotor button for shorts /cracks and cleanliness. If you have changed the HT leads then check the firing order . Check the HT lead from the coil to the distributor cap.

Jul 24, 2014 | 1995 Jaguar XJS

1 Answer

What is the order of spark plug cables to the distributor for mazda 323 2001


On the distributor cap on each HT Lead connection there is a number presenting the spark plug connection with the cap. if the distributor cap has only the number "1" and not on the other hole for the HT lead connection then you fit the spark plug one lead and following the clockwise rotation fit the other HT leads. 1 for first spark plug,2-for second spark plug etc. First spark plug is fro the front of timing belt side. Good Luck!

Jul 03, 2014 | 1988 Mazda 323 Hatchback

1 Answer

Misfiring Suzuki 400 rf


check plug for good spark, if bad replace plug check ht lead and cap. if all good when plug out look at piston if can for hot spots. unlikely but while plugs out might as well look. could be inlet valve,your need a compression test to see if you have a bent valve not closing properly. could try the old way of putting finger over spark plug hole and turn engine. should be enough pressure to blow past your finger. obviously do this on cold engine. as you can see its a bit of a tick list. let me know how you get on, if that dont sort it we move on to the carb.

Feb 15, 2013 | Motorcycles

1 Answer

REWIRE SPARK CABLES 95 CHEVY CORSICA V6


Hi, I am not aware of your skills level, however, some office "WHITE OUT" or white paint etc will vastly assist you to complete the task successfully. Pick a lead in the cap, mark it's location with a dab of white out / white paint, follow the wire, (HT lead) to it's spark plug, very carefully remove the spark plug connection and / or rubber boot if fitted. fit the replacement lead and route it back to the cap. Carefully remove the original cable and fit the replacement. Do the same for the rest of the cables,(HT leads) marking the cap as you go, ie, a,b,c,d or a number sequence your choice.. Remember, doNOT remove all cables at the same time. Change out one at a time, and you will not mix up the firing order.

It is a wise precaution to replace the cap and rotor,when you replace the cables, (HT leads.). .

Good luck.

Feb 01, 2011 | 1995 Chevrolet Corsica

1 Answer

I have took all the leads off from coil to plugs and forgot the set up on suzuki gsx600f Hreg


If you are sitting on the bike the left coil has an orange/white wire on the top and a white wire on the bottom.The HT leads go to plugs 1 4.The right coil has an orange/white lead on the top and a black/yellow wire on the bottom.The other HT leads go to 2 3.It doesnt matter which HT lead goes to either plug as thboth HT leads on the same coil fire at the same time (wasted spark system).Hope this has helped or you have already sorted it out.

May 14, 2010 | 2008 Suzuki GSX-R 600

1 Answer

Where do ht leads go from coils on my gsxr 400 gk76


Hi again,

It would seem you posted twice, please your other post.

Aug 15, 2009 | 1991 Suzuki GSF 400 Bandit

1 Answer

Suzuki gsxr 400 gk76 which ht leads go where from coils


Hi and welcome to FixYa,

Almost always on Suzuki 4 cylinders, the left (when seated) igntion coil supplies cylinders 1 & 4 while the right ignition coil supples 2 & 3.

Good luck and thank you for asking FixYa.

Aug 15, 2009 | 1991 Suzuki GSF 400 Bandit

Not finding what you are looking for?
1994 Suzuki RF 400 R Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...