Question about 2005 Aprilia MX 125
Hi, Fatdogs212 and the usual suspects are:
1. Dirt or other foreign matter between float valve and its seat.
2. Float valve sticking.
3. Float valve and/or valve seat worn or damaged.
4. Float misadjusted.
5. Float cracked, leaky or damaged.
6. Excessive "PUMPING" of hand throttle grip.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
DOWNLOAD 2005 Aprilia Mx 125
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Oct 27, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2006 Aprilia RS125 doesnt start
Hi .... Try switching the petrol off just prior to stopping the engine and start up again with the petrol OFF. There's enough petrol in the carb to start the bike. A good battery should show over 12 volts. Take the plugs out and give them a good clean or replace them. Is there a petrul pump fitted ? A two stroke needs to be ridden quite hard to maintain efficeincy, higher revs etc ........ let us know how you get on ?
Posted on Dec 21, 2008
SOURCE: engine sound and oil leak
crank main bearing sounds like its gone and oil seal gone i had same problem needs imidiate rebuild before more damage ocures looking at an expensive job
Posted on Jan 20, 2009
Today is your lucky day. Go to the website below and you can download a free service manual and a free parts diagram for your bike. Now you can find the plug and a whole lot more.
http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.
Top rating for this answer! Thanks Tommy.
Posted on May 06, 2009
Posted on Aug 03, 2009
Did you clean the pilot & main jets in the carb & set the float height to standard? There is also an over flow in the carb which should stop fuel flooding into the air filter - did you check?
Make sure there are no splits in the fuel pipes & the smaller vacuum pipe that goes from the side of the auto fuel tap, also check pipes connect well
By your description it sounds like the carb is filling very slowly, 1 bowlful would get you around 2 miles & then plug would be dry when trying to start it, leaving it overnight the carb would fill up & flood air filter due to a leaky fuel tap
Please mark this as very helpful (if it has been!!)
Posted on Apr 22, 2010
Tips for a great answer:
Jul 02, 2015 | Triumph Daytona 955i Motorcycles
Jun 25, 2014 | 2000 Suzuki XF 650 Freewind
Apr 15, 2014 | 2011 Bajaj Pulsar 180
Apr 10, 2014 | 2006 Yamaha V Star Custom
Sep 13, 2013 | Harley Davidson Motorcycles
Feb 18, 2011 | 1985 Moto Guzzi Le mans III
Jan 25, 2011 | 2005 Derbi Senda SM 125 4T
May 11, 2010 | 2008 BMW K 1200 GT
Mar 24, 2009 | 2004 kawasaki VN 1500 Vulcan Classic
Jul 09, 2018 | Motorcycles
180 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: