At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you tried to start the engine for any length of time, the plug would be damp and smell of petrol because fuel was being drawn into the combustion chamber. Without spark to ingnite the mixture, it would cause the plug to become damp. I am assuming you fitted the correct spark plug and that it is gapped correctly.
I don't mean this to sound foolish, but I would suggest you make certain the emergency kill switch has not been accidentally switched off. Also, if you have a sidestand safety interlock that prevents the engine being started while the side stand is down, flip up the sidestand and try again to start it.
Additionally, to make sure the plug wire is securely fitted to the plug. It is possible that the inside of the plug wire cap has gathered moisture and may need to be wiped dry.
If none of the above suggestions solve the problem, remove the plug then reconnect it to the plug wire and hold it near the cylinder - but not near the plug hole in the cylinder head (fuel vapors) - while pressing the starter . You should see an obvious spark. No spark likely means the coil is faulty.
×