Hi,
look at the clutch plate centre hub. The side which fits to the pressure plate is generally raised further than the side which fits to the flywheel side if you have the old pressure plate and clutch plate, look at the pattern on the clutch plate, it will be emulated on the pressure plate..
Hope that you have had the flywheel 'skimmed' to ensure good contact with the clutch plate. It would be a good thing to also check the spigot or nose bearing / bushing in the flywheel. All should be replaced as a set, pressure plate, spigot bearing,clutch plate, release / throwout bearing and the flywheel skimmed.or replaced if necessary.
Happy motoring.
666 views
Usually answered in minutes!
×