First you need to check if there is gas left in the cylinder, then once tat is confirmed be sure that the gas pressure is opened so it can connect the gas to the oven burners, if that does not seem to be the problem then it means there is either a blockage or the pressure is not enough to get the gas to the oven burners.
If there is gas in the cylinder and the switch is turned on, then you need to change the hose that links the gas to the oven burners. To replace it is quite simple. Turn off the pressure switch, then You take off the hose, fix in a new one, and turn on the pressure switch, but if the gas is empty ll you have to do is to refill the cylinder with gas.
Hope this was helpful. Thanks for using fixya.
Hi,
The ignitor is not working right and is going bad....
have
the repair man replace the ignitor, or DIY....
Check out this tip
about your problem...
Oven not Working or Oven
not Heating
Oven
Problems Replacing
the Igniter
heatman101
Hi,
The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...
Oven not Working or Oven not Heating
Oven Problems Replacing the Igniter
heatman101
ssgs
153 views
Usually answered in minutes!
×