Question about 2006 Harley Davidson FLHRI Road King

2 Answers

How do i change my clutch and plates on a 1996 harley davidson roadking

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

On your '96 model, you need a special tool to disassemble the clutch pack. The tool is # HD-38515A clutch spring compression tool. Jim's and several other manufacturers make this tool. JP Cycle has a Jim's Part Number: 620-198 for $50.

Disconnect the battery and drain the primary. Remove any floorboards and other thing necessary to get the outer primary cover off. Using the above mentioned tool, compress the clutch spring and remove the lock ring that holds the spring in. Take note that there is a lock ring seat on top of the spring. This part is like a solid ring that goes behind the lock ring. It is "L" shaped so pay particular attention to the way it is positioned. Once you get the lock ring off, release the tension on the tool and allow the spring to come out of the clutch outer drum. Start taking the old disc out and laying them aside. Notice where the "sping plate" goes in the clutch stack. Replace it in the same position. Soak your new plates in oil overnight and then install them into the clutch drum exactly like the old ones came out. Install the spring and use the compression tool to install the lock ring and seat.

Adjust the clutch according to service manual directions and replace the outer primary cover. Add oil and reconnect the battery.

Ride Safe
Steve

Posted on Jan 03, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Belt drive keep sampling y

Posted on Jun 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 roadking wont go into gear and starter just spins'


The starter clutch needs to be replaced. An alternator sgop will usually rebuild these for 1/2 of a new one.
.A thumbs up would be greatly appreciated if this answer is helpful to you. 97-roadking-wont-go-into-gear-starter-4d5i0utctl2htkxwobhufr12-1-0.jpg

Mar 26, 2014 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

How to install seal and o ring 1996 roadking transmission


Hi Anonymous, I'm sorry you can't find the very first and best tool you bought for your Harley Davidson. Don't despair, for a mere $5.50 you may be able to download another one from the website below:
Harley Davidson Manuals Mark Workshop
Good luck

Mar 14, 2014 | Harley Davidson FLHR Road king Motorcycles

1 Answer

1997 harley roadking tool number 38515 spring compressor


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Motorcycle Workshop Transport

Jan 29, 2013 | 2006 Harley Davidson FLHRI Road King

2 Answers

1996 883 harley clutch replacement


You put the spring plate on first (after putting on all the clutch disks) with it being held in the compressed state. Then you insert the snap ring into the grooves in the center of the clutch. Then you can re leave the pressure of the compressed spring plate. The snap ring is used to keep the spring plate under pressure at all times in normal operation.

Dec 11, 2012 | 1993 Harley Davidson XLH Sportster 883...

1 Answer

How do i replace the clutch plates on my 2009 roadking?


Hi Duckie, for more information about your question please visit the websites below. Good luck and have nice day.
Harley clutch pack replacement on twin cam 2 7 remove outer primary

Aug 13, 2012 | 2009 Harley Davidson FLHRC Road King...

1 Answer

Have no clutch pressure on a 1996 Harley davidson Fatboy


Make sure the ball and ramp was in the proper position after you replaced the clutch cable. It should have been to the rear of the trans cover.

Jul 30, 2012 | Harley Davidson Motorcycles

1 Answer

Need instructions on how to change my clutch on my 97 roadking


All you have to do is drain and pull the primary cover. Now, I can't remember whether the '97 clutch had the bolts that hold it together or the snap ring. If it has the six bolts holding the clutch spring in, simply take the bolts out and your clutch assembly comes apart. You can change the fiber plates and the spring plate in the middle. If your clutch is held together with a snap ring, you'll need a special tool to disassemble the clutch. You can replace the friction plates, steel plates and the spring plate without taking the entire clutch off the mainshaft with either clutch.

Good Luck
Steve

Jun 04, 2011 | Harley Davidson FLHR-FLHRI Road king...

2 Answers

1996 roadking fuel pump


check relays and fuses first; ign tsm module grounds

Jul 06, 2009 | Harley Davidson Harley-Davidson FLHR Road...

Not finding what you are looking for?
2006 Harley Davidson FLHRI Road King Logo

1,573 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...