Question about 1994 Suzuki GSF 400 Bandit

Open Question

How do i remove the front seat from a 1990 suzuki bandit?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: raise the seat

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

Ad
  • 2336 Answers

SOURCE: raise the seat

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

  • 22 Answers

SOURCE: suzuki bandit front brake discs

no they are different if you have a 1200 need to get them for the 1200 or the gs500e and f models or the RF900

Posted on Feb 25, 2009

  • 3567 Answers

SOURCE: suzuki gsf 1200 s bandit

Christmas comes early. Go to the site below and you can download a free PDF service manual. Yours is the 1st one in the "Suzuki GSF" section of the list. 4 or 5 below that is a PDF parts diagram with part numbers.

http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.

Top rating due for this answer! Thanks Asel :)

Posted on May 08, 2009

luckyluke78
  • 333 Answers

SOURCE: torque settings for crankcase suzuki bandit 600gsf

Crankcase bolt (M8)
(initial):13 N-m (1.3 kgf-m, 9.5 lb-ft)
(Final):23 N-m (2.3 kg-fm, 16.5 lb-ft)

Please leave positive feedback if you feel I have helped.

Thank you

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing 2001 suzuki bandit seat


Hi, Khanh for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki Bandit gsf 1250 Seat Removal
1996 suzuki bandit how to remove seat gas tank and air filter
Suzuki GSF600S Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gs-owners-manuals

Oct 06, 2017 | 2001 Suzuki GSF 600 S Bandit

3 Answers

How to replace air filter suzuki 1200 gsf bandit


- Take the seat off.
- Unscrew the two bolts holding the back of the tank.
- Remove (unscrew) the petcock handle.
- Lift the back of the tank. I'm not sure the air filter can be accessed without removing the whole tank. If you have to remove it, it just slides back and up - there are no screws in the front of the tank. Pay attention not to disconnect the hoses/wires if you are just lifting the tank, or disconnect them all if you have to take the tank off.
- Unscrew and remove the battery cover if necessary.
- Unscrew the airbox cover (two screws in top corners).
- Pull the airbox cover back and remove it. It's held at the lower end by two plastic "teeth" - no screws.
- Remove the old filter and put in the new one.
- Put everything back in reverse order.

Refer to the microfiche above for parts layout. This is a simple procedure that shouldn't take more than 30 minutes even with tank removal.

Apr 27, 2010 | 1997 Suzuki GSF 1200 Bandit S

2 Answers

What needs to be done to adjust seat height


If you want to lower your seat height, first renove the seat, flip it over and you will see rubber blocks held in by screws. Remove the screw holdong each block and simply rotate 180 degrees, continue until all blocks have been rotated. A very clever idea by Suzuki.

Mar 02, 2010 | 2007 Suzuki GSF 1250 Bandit S

1 Answer

Need to lower seat by about an inch


maybe check with your local upholstery store and see if they can remove some seat foam, or look into a replacement seat from places like

mustang seat..

Feb 23, 2010 | 2007 Suzuki GSF 1250 Bandit

1 Answer

How to adjust seat height on a 1250 bandit


not much you can do ,maybe turn the rear shock to a ofter setting,your bike manual will show how to adjust that but it will only be a small amount, maybe contact your local seat repair shop and have them remove some seat foam or look into a after market seat ...

www.mustangseats.com

Jan 16, 2010 | 2007 Suzuki GSF 1250 Bandit

1 Answer

I HAVE A SUZUKI GSF650 BANDIT K6 PROBLEM, I'VE REMOVED THE FUEL TANK , AND WHEN I RE- ASSEMBLE IT IT SEEMS I MISS PLACED THE UNDER TABK WIRES , AND THE BIKE IS NOT WORKING !


it just like you said...you'll have to take the tank, seat, and fairings back off and search everywhere for them..they'll be there, unless someone cut them off.....you might have to put in some extra time start at the rear and work forward..hope you find them.

Nov 16, 2009 | 2005 Suzuki GSF 650 N Bandit

1 Answer

How to take of fuel tank corectly from suzuki bandit 600n 2001


Remove gas lines put tank on off. Pull seat. Should be bolts to hold tank. Pull tank toward rear and ligt. You might want to drain gas first

Oct 13, 2009 | 2001 Suzuki GSF 600 N Bandit

2 Answers

Suzuki bandit front brake discs


no they are different if you have a 1200 need to get them for the 1200 or the gs500e and f models or the RF900

Feb 22, 2009 | 1998 Suzuki GSF 1200 Bandit S

1 Answer

Raise the seat


First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Nov 10, 2008 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Raise the seat


First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Nov 10, 2008 | 1997 Suzuki GSF 250 Bandit

Not finding what you are looking for?
1994 Suzuki GSF 400 Bandit Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...