Question about 2002 Harley Davidson FLHRCI Road King Classic

1 Answer

Security systems alarm goes off when bike is idleling.goes off when rpm is increased.does not disable bike only siren chirps and sounds for 10 seconds or so.i have installed new batteries in siren box and key fob.i have reset everything the owners manual instructed me to .also adding to the problem is at ideling i step on brake or put on turn signal this will also activate the siren.acts like the more demand i put on electric system the worse the problem becomes

Posted by on

  • HARRY RICHARTZ Jan 03, 2011

    ITS GOING TO TAKE A WIHILE TO CHECK OUT THE WIRING.I WILL CONTACT YOU WITH MY RESULTS HARRY

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi and welcome to FixYa!

I used to have a client with the same issue. Alarm always triggers and I found out that there's a grounded wiring that's why the alarm always go. Please check for faulty wirings on the bike to resolve the issue. It may be a loosen wire or a burnt wire somewhere.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jan 03, 2011

  • dj_relly999
    dj_relly999 Jan 03, 2011

    No problem. Good luck!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hornet alarm doesn't chirp, activate, or go off anymore. I've tried to check the valet mode, but it doesn't do anything. The remote still locks and unlocks door's and it cranks.


My car alarm doesn't chirp all the time, but it still unlocks the ...

forums.anandtech.com > Social > Off Topic

AnandTech
Feb 3, 2003 - 11 posts - ‎7 authors
My car alarm doesn't chirp all the time, but it still unlocks the doors. ... Distributed Computing. ·, Security. ·, Social. ·, Off Topic ... The rest of the electrical systemseems fine. ... Just read the owners manual and find out to to re-enable the ... but like when I arm my alarm it arms but then it'll go off for no reason.

Alarm Troubleshooting Help Tips - Dr.Detail

www.drdetailshop.com/TROUBLE.html
When you try to start the car the alarm goes off.. It could be your battery. 3. Try to start no sound, nothing lights up, alarm doesn't work. It could be a loose battery ...

Viper Alarm won't chirp help!! - 12 Volt Forum : Car security ...

www.tintdude.com > ... > 12 Volt Forum : Car security / Convenience

Sep 11, 2006 - 7 posts
posted in 12 Volt Forum : Car security / Convenience: Hi I am new to this site ... Myproblem is when I lock it it won't chirp or roll my windows up ... If I hold the lock button the siren will go off,and if I press and hold the AUX my windows will go down. ... It won't chirp when activated or when I hold the arm button.Missing: hornet

How To program DEI Viper Python Avital Sidewinder Valet ...

? 3:34
https://www.youtube.com/watch?v=r01ntAXGxBw
Mar 10, 2011 - Uploaded by Lessco Electronics
hi I have the viper 7142v alarm system,tge problem is I only had one remote,I ordered a spare but ... My alarm only chirps when i am programming lock and unlock functions. it does not ... As soon as I connect car battery my alarm goes off. ... I obviously don't have a remote, and it doesn't have a valet switch.

Jan 06, 2016 | Vehicle Parts & Accessories

1 Answer

How to disconnect the alarm


Depending if it is a aftermarket or a factory alarm, they should all have fuses that can be removed. By removing the fuse, you may lose your keyless entry option. Most aftermarket alarms have a siren that is usually mounted under the hood in the engine compartment area. I've seen where people have cut the wire going to the siren to disable it but keep the power going to the alarm system to keep the keyless entry still functional if it came with the alarm system.
Factory alarms usually use the existing horn for the alarm. If that is the case, you might need someone who is experienced to disable the circuit so that the horn will not sound if alarm goes off but the horn will still be functional when needed. Hope this helps.

Dec 20, 2014 | Cars & Trucks

1 Answer

My viper alarm system when armed and disarmed there is no sound from the speaker


Either the system is in valet or, the chirps have been deleted or, the siren is broken.
If the LED is on solid the system is in valet. open the door, press lock, unlock, lock on the remote to remove valet.
Press and hold the lock button. This activates the car finder/panic. The siren should begin to wail. If it does, the siren works. If it doesn't and all you see is the aprking lights flashing the siren is defective.

Mar 04, 2013 | 350 HV ESP Security System 350HV ESP

1 Answer

How to raise the volume in your viper car alarm


Check your siren to see if you have a black and, a black and white wire. To increase the volume (delete soft chirp) cut the black wire, cut the black with white wire to delete multi-tone.

Dec 25, 2012 | Remote Start System

1 Answer

How to program new remote to alarm


TRANSMITTER PROGRAMMING Note: System can learn up to 3 different codes max. 1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3 rd time. (ON/OFF, ON/OFF, ON) You should hear (1) short chirp. 2. Push the Program/Override Button for 5 seconds until the siren chirps (3) times. Release the button. The system is now in programming mode. 3. Press Button #1 on new transmitter - siren will chirp to confirm programming. Repeat Step 3 within 5 sec. for up to 2 additional transmitters. 4. Turn off Ignition. Note 1: If only one transmitter is being programmed, continue pressing button #1 until dash LED flashes goes out and the system chirps to exit programming mode to prevent unauthorized codes and noise from entering the system. Note 2: Programming mode is exited automatically after 5 seconds of last code transmission or once 3 new codes have been programmed. The LED will flash (4) times indicating program mode exit.

Jan 12, 2011 | 1Way Remote Transmitter

1 Answer

How to turn kill switch off and see manual and instructions


I am assuming that you want to disable the system temporarily by putting it in valet mode. You will need to locate the valet button; they are usually installed under the dash within reach of the driver. The button should be black and about 1/2" in diameter.
Pressing and holding the button for 3 seconds while the alarm is disarmed will put the system into valet mode. The system will turn the LED light on steady and chirp the siren to indicate that valet mode has been activated. To exit valet mode, press and release the button. The LED will turn off and the siren will chirp to indicate that you have exited valet mode.

The included link is for the manual, see page 8.
http://www.caralarm.com/manuals/K-9/K9-Mundial-ss.pdf

Nov 03, 2010 | Excalibur. K9-MUNDIAL-SS Entry Level Auto...

1 Answer

Sound


it sounds like the chips have been eliminated, if so......
1) turn ignition "on" and then "off"
2) within 10 seconds push the valet buttons three times
3) you should get 1 siren chip indicating the chirps are now "on".......if, you get 2 chirps then you just eliminated the chirps.

May 22, 2009 | APS787 Prestige Remote Start and Security...

1 Answer

Black widows 293 just chirps makes noise and hasnt stopped even when i reset alarm


Check two things firstly reposition the earth for the siren or /and the alarm, also is there any chance the siren got wet?

Apr 22, 2009 | Vehicle Parts & Accessories

2 Answers

How to turn up volume on siren. 791XV


I dont think you can turn it up. But I added 2 more sirens. The original is very small and quiet.

Apr 12, 2009 | 791XV The 791XV is a 2-way Security and...

Not finding what you are looking for?
2002 Harley Davidson FLHRCI Road King Classic Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...